HP LaserJet 2400

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

The printer is either low in toner, the density is set too low, or the Economode may be turned on. Remove the toner cartridge and shake it. This will redistribute the toner and often will temporarily solve the problem. However, this usually indicates it is time to install a new cartridge.
Restart your printer, router, and mobile device

Restart all devices to clear network and hardware error states. Turn off the printer, and then turn it on again. Disconnect the power cable from the router, wait ten seconds, reconnect the cable, and then wait for the internet connection to complete.

Right-click the product icon, and then click Printing Preferences. On the Services tab, click Print supplies status page from the drop-down list, and then click Go! The Supplies Status page prints.
The paper might not be engaged with the feed rollers. The paper-width guide is pressed against the paper stack too tightly. The paper settings in the print driver do not match the paper loaded in the paper tray. The rubber paper-feed rollers are dusty.
Check that the correct paper is properly loaded into the printer and is not jammed. Replacing damaged cables, plugging in loose or disconnected cables, and fixing paper jams as necessary may resolve the issue.
A printer`s heads, nozzles, and other components can become dirty or clogged, which could show up as white lines running across your page. Your printer may have a head-cleaning feature available through your device software located on your computer or from the control panel on the printer itself.
You may see a “printer offline” error if your computer can`t communicate with your printer. This can be caused by loose cable connections or an outdated printer driver or operating system. The HP Smart app (below) can automatically diagnose and resolve printer offline issues in Windows operating systems.
If your printer is running low on ink, it may start printing blank pages. To check your ink levels, go to your printer`s control panel and select the Ink Levels option. Whenever the ink levels are low, replace the cartridges with new ones. You can also try shaking the cartridge gently to redistribute the ink.
The common reasons for this issue are various, for instance, the paper input tray is overloaded, dust or moisture can affect the paper feed or paper pick rollers, the printer driver is old, etc. Thus, the printer cannot detect the paper that has been inserted into the tray.
Several factors may cause the product to print blank pages, such as print settings, low ink, or the product itself. Check the following: Make sure the product is placed on a flat, stable surface that extends beyond the base in all directions. The product won`t operate properly if it`s tilted or at an angle.
Reasons why your HP printer has ink but won`t print

This may seem obvious, but it sometimes happens: first make sure your paper tray has paper in it. Misalignment, clogged printheads, faulty data communication or insufficient ink levels can also be sources of the problem.

There are numerous possible causes for a printer that`s randomly producing blanks. The most common ones are empty ink cartridges, improper cartridge installation, and congested nozzles. Driver and software issues can sometimes cause this problem as well.
Running out of ink

If your printer runs out of ink, obviously the pages will come out blank when you attempt to print out what you need. Most of your HP printers will already have some kind of indicator to let you know that you are running slot. Solution: The solution is a no-brainer. Replace the ink cartridges.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

No Subject
ANSWER : what do i do with this problem

Read Full Q/A … :

HP LaserJet 2400

No Subject
ANSWER : I do not know for sure, but I can tell that you probably do not have Thesis Statement Outline At The Highest Standards – PHD Thesis Writer or else, you may not have the right program edition.

Read Full Q/A … :

HP LaserJet 2400

No Subject
ANSWER : After Windows 98, Canon stopped supporting the BJC 70/80/85 series. Drivers were available for W98 and earlier, but now these are no longer carried on the Canon website. I now have my BJC 70 & 80 working, not only on a virtual machine running WinXP but also on the host which runs W8.1.In the case of Win XP it seems that a 3rd party driver was used, but I am mystified as to how it got onto the W8.1 machine, because I have a vivid recollection that the BJC managed to auto-install itself as soon as it was plugged into the USB port without any action by myself. I never expected it to work with Win8.1. I was resigned to using it only with the Virtual copy of WinXP, which meant that the printer needed to be connected only AFTER the virtual machine was booted. Now my little Bubble-Jets are accessible both from both the virtual client and the host. The most likely explanation is that I did actually find and download a 3rd party driver for Win8.1 and that I have had amnesia.

Read Full Q/A … :

HP LaserJet 2400

No Subject
ANSWER : I consider that there are 4MP films in store. The video for the 5P be supposed to be close sufficient for you to do the mend. help me to do my homework There are a number of minor dissimilarity in cover taking away.

Read Full Q/A … :

HP LaserJet 2400

No Subject
ANSWER : May be bad BIN file? Find here what I’ve find searching solution for my C511dn (w/o exit yet)

Read Full Q/A … :

HP LaserJet 2400