Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Check Cables and Printer USB Ports

Check all cable connections (including the power cord) on the printer side. If the printer does have power and you`ve properly connected the communication cable, but the printer is still not recognized, try switching to a different USB port on the PC.

Tap Settings > Hardware > Printers > Create Printer Station. Enter a printer station name. Tap Printer then select printer. Click Connect AirPrint printer and choose your printer.
Open the start menu and select Control Panel > Administrative Tools > and choose the Services icon. Locate the Print Spooler service and right-click. Then select the option to “Stop” the service.
Confirm that your printer supports AirPrint. Contact your printer`s manufacturer for details. Make sure that your iPhone or iPad and your printer are connected to the same Wi-Fi network and that you`re within range.
Turn on the bluetooth on your phone and printer. Go to Settings > Bluetooth. Tap on your printer. You should now be paired.
The No Airprint Printers Found message means your printer and iOS device are not on the same network. Verify the printer and iOS device are connected to the same 2.4 GHZ network. Not Guest or Public WiFi. This document shows the troubleshooting steps.
Your printer should have been packaged with a USB cable regardless of whether it is a wireless or wired printer. Plug the cable into your printer and your computer`s USB port. The direct linking should trigger your computer to recognize the printer and start up the software needed to complete the installation.
Click Start, point to Settings, and the click Printers. Right-click the appropriate printer, and then click Properties. Click the Paper tab, and then click the paper size you want to use in the Paper Size box.
Click on Device Manager from the context menu. In Device Manager, click on View and select Show hidden devices. Next, expand the Printers section to view your printer.
Select the Start button, then select Settings > Devices > Printers & scanners. Under Add printers & scanners, select Add a printer or scanner. Choose the printer you want, and then select Add Device. If you don`t see the printer you want, select The printer that I want isn`t listed.
In the majority of cases, printers` self-cleaning mechanisms clean blocked printer heads by flushing the nozzles with air. The air works to dislodge dry ink inside the cartridge channels and also push it out. The intensity of the self-cleaning process of printers is usually not very strong.
During the printing process, paper, toner and dust particles can accumulate inside the printer. Over time, this buildup can cause print-quality problems such as toner specks or smearing. This printer has a cleaning mode that can correct and prevent these types of problems.
Make sure that both ends of the USB cable are correctly inserted into the computer and the printer. Try disconnecting and reconnecting the USB cable at both ends. Disconnect the printer and the computer and reconnect them. Try another USB port if available.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

No Subject
ANSWER : what do i do with this problem

Read Full Q/A … :
Unknown Printer

No Subject
ANSWER : I do not know for sure, but I can tell that you probably do not have Thesis Statement Outline At The Highest Standards – PHD Thesis Writer or else, you may not have the right program edition.

Read Full Q/A … :
Unknown Printer

No Subject
ANSWER : After Windows 98, Canon stopped supporting the BJC 70/80/85 series. Drivers were available for W98 and earlier, but now these are no longer carried on the Canon website. I now have my BJC 70 & 80 working, not only on a virtual machine running WinXP but also on the host which runs W8.1.In the case of Win XP it seems that a 3rd party driver was used, but I am mystified as to how it got onto the W8.1 machine, because I have a vivid recollection that the BJC managed to auto-install itself as soon as it was plugged into the USB port without any action by myself. I never expected it to work with Win8.1. I was resigned to using it only with the Virtual copy of WinXP, which meant that the printer needed to be connected only AFTER the virtual machine was booted. Now my little Bubble-Jets are accessible both from both the virtual client and the host. The most likely explanation is that I did actually find and download a 3rd party driver for Win8.1 and that I have had amnesia.

Read Full Q/A … :
Unknown Printer

No Subject
ANSWER : I consider that there are 4MP films in store. The video for the 5P be supposed to be close sufficient for you to do the mend. help me to do my homework There are a number of minor dissimilarity in cover taking away.

Read Full Q/A … :
Unknown Printer

No Subject
ANSWER : May be bad BIN file? Find here what I’ve find searching solution for my C511dn (w/o exit yet)

Read Full Q/A … :
Unknown Printer