Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Unplug the printer and then reconnect the printer to reset the power module. Disconnect the power cord from the printer. Remove the battery from the printer. Unplug the power cord from the wall outlet, power strip, or surge protector.
Status unknown means a circumstance where samples were scheduled to be taken by the regional water quality control plant and were not, samples were taken but not yet analyzed by the report due date or where a new discharger has yet to be sampled.
If the LabelWriter appears as Unspecified or Unknown in Devices and Printers on Windows, it usually means that the computer has not identified that device as a printer yet.
The amount of electricity a printer uses depends on its type, usage, and features. On average, inkjet printers consume between 30-50 watts of electricity when in use, while in standby mode, they use 3 to 5 watts.
An average ink-jet which is designed for home use will typically use 30 to 50 watts when it is printing, in standby mode most printers will draw around 3 to 5 watts of power. Commercial printers which are used in an office will draw 30 to 50 watts on standby and 300 to 500 watts when printing.
A component found in electrostatic printers, laser printers, and xerographic printers and photocopiers. The fuser unit is used to permanently bond toner to a substrate by applying heat and pressure. A fuser unit is made up of two rollers; one to apply heat and one to apply pressure.
2) Unplug the power cord from the printer & wall. 3) Wait for 30 seconds. 4) Plug the power cord back into the printer and wall, ensure the printer is plugged into the wall & not to a surge protector. 5) Insert the cartridges back into the printer.
The reset key is a single use key and once used cannot be used again. All EPSON printers have inbuilt counters that count up the number of pages a printer produces, the number of head cleans executed and various other attributes. Once a critical level is reached the printer will enter its service mode.
Reset. Resetting the printer stops printing and clears the current print job received from the active interface. You may want to reset the printer when there is a problem with the print job itself and the printer cannot print successfully.
Synonyms of unknown (adj. obscure, mysterious) anonymous.
adj. 1 not known, understood, or recognized. 2 not established, identified, or discovered.
To fix the error code 0x0000011b related to networked or shared printers, Microsoft says you should disable the print spooler privacy settings on both the Client PC (from which you work) and Print Server (Workstation to which the printer is attached).
A power source is mandatory for all printers. Before a printer can perform any useful function, it must be turned on.
Yes, printing without computers is not only possible, but fast, easy, and fun. Printed photos are much better than asking people to squint at your digital camera display. The “Money Saving Printer Tips” Contest How has your company saved money on printing costs?
Print. Yes, most commercial LaserJet and Ink jet printers have batteries in them with the exception of some low-end products that are single function. MFP`s without fax function would have no battery as well. All of the batteries for LaserJet and InkJet are small coin cell BR and CR type.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Epson Stylus sx130 Printer does not power on…
ANSWER : I have had the same problem with Epson px660. I have replaced the main board twice with the same problem recurring after printing many copies of documents..there are some transistors at the back of the main board which when removed the printer will power on but will not recognize the cartridge..so I’m still wondering of the power supply is short circuiting the main board…a

Read Full Q/A … :
Unknown Printer

Wont power on
ANSWER : If it is plugged into a power strip or surge protector unplug it and plug directly into wall outlet; check to make sure the power cord is fully seated where it connects to printer.

Read Full Q/A … :
Unknown Printer

HP psc 2110 all-in-one won't turn on after power o
ANSWER : left the printer on now i cant get the printer to go on

Read Full Q/A … :
Unknown Printer

Printer does not print after power off
ANSWER : Hello .. I have a problem with my HP1102w printer.. It had worked fine for a while.. But now it will not print after it shuts down.. I have reset it to factory setting,, and removed the drivers/software from my computer and reinstalled several times using the wireless install.. but everytime it will work just fine wirelessly and with the USB cord untill either I turn it off and back on or it shuts down by its self… When you try to print after it is turned back on it will not do anything.. it used to turn its self back on when I would print wirelessly but now it will not.. the blue wireless light is on lik eit is connected to the network router.. Doe anyone have any ideas.. I am using XP-pro… VMware Training in Chennai | VMware Training in Chennai | VMware Training in Chennai

Read Full Q/A … :
Unknown Printer

Power button HP Destjet 1000
ANSWER : I have never seen a power button go bad, not that it couldn’t happen. Possible your power supply isn’t working or a board in the printer went bad.

Read Full Q/A … :
Unknown Printer

Power problem
ANSWER : Buy a new printer.

Read Full Q/A … :
Unknown Printer

will not print, but has power
ANSWER : I’ve gone out on service calls with this problem. One had a breaker popped. The other was an engineering firm. If it was plugged in and they said “We’re engineers”. It was plugged into the wall, but it wasn’t plugged all the way into the printer. One person brought in a printer and I switched on the power on the side of the printer. “It has a power switch?”

Read Full Q/A … :
Unknown Printer

LaserJet 4 won't Power Up
ANSWER : I haven’t seen that particular behavior on that model. It either works or it doesn’t. My first choice would be the power supply.

Read Full Q/A … :
Unknown Printer