Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Restart the printer and try again. Unplug the printer from an outlet. You can plug it back in again to see if it works this time. Check if the printer is properly set up or connected to your computer`s system.
If the error message, Unknown device appears, this can indicate that there is not adequate power and the PC can not identify the printer correctly. Verify that there are no extension cables and that the power cable is no longer than five meters. Reseat the power cables.
Click [Start] > [Devices and Printers]. 3. Right-click on the driver for your machine under “Unspecified,” and click [Properties]. The driver will not appear under “Unspecified” if the machine and computer are not connected.
Your printer should have been packaged with a USB cable regardless of whether it is a wireless or wired printer. Plug the cable into your printer and your computer`s USB port. The direct linking should trigger your computer to recognize the printer and start up the software needed to complete the installation.
Make sure that both ends of the USB cable are correctly inserted into the computer and the printer. Try disconnecting and reconnecting the USB cable at both ends. Disconnect the printer and the computer and reconnect them. Try another USB port if available.
Simply plug the USB cable from your printer into an available USB port on your PC, and turn the printer on. On the taskbar, select the Search icon, type Printers in the search bar, and then select Printers & scanners from the search results to open the Printers & scanners system setting.
Open the start menu and select Control Panel > Administrative Tools > and choose the Services icon. Locate the Print Spooler service and right-click. Then select the option to “Stop” the service.
If you see an “unknown accessory detected near you” message (or similar), it means there`s an item compatible with the Find My network that might be traveling with you. If so, its owner may be able to see your location. You should look to see if something you`re borrowing has such a device attached.
Printers show up under “unspecified” when Windows cannot associate an appropriate driver. Reference this article to find drivers for your Brady printer: How to Find Windows Printer Drivers for Your Brady Printer. If you have recently installed the driver, simply rebooting your PC can resolve the unspecified status.
Your printer should have been packaged with a USB cable regardless of whether it is a wireless or wired printer. Plug the cable into your printer and your computer`s USB port. The direct linking should trigger your computer to recognize the printer and start up the software needed to complete the installation.
If you`re using Windows 10, click or tap the “+ Add a printer or scanner” button. No matter if you`re using Windows 11 or Windows 10, the operating system begins “searching for printers and scanners,” and if it manages to find your local printer or scanner, it will try to install its drivers automatically.
If you`re using Windows 10, click or tap the “+ Add a printer or scanner” button. No matter if you`re using Windows 11 or Windows 10, the operating system begins “searching for printers and scanners,” and if it manages to find your local printer or scanner, it will try to install its drivers automatically.
1: Check Printer Power, Cables, and Paper

Check that the correct paper is properly loaded into the printer and is not jammed. Replacing damaged cables, plugging in loose or disconnected cables, and fixing paper jams as necessary may resolve the issue.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Difference Between Laser Printer and InkJet Printer
ANSWER : Laser uses toner which is a powder that gets melted onto the page. Inkjet uses ink that gets squirted onto the page.

Read Full Q/A … :
Unknown Printer

newly installed printer…can scan but cant be set as a default printer???
ANSWER : ITS AN EPSON L210…

Read Full Q/A … :
Unknown Printer

PRINTER MX 320 CANON ALL IN ONE PRINTER
ANSWER : Probably a worn feed roller. You can try cleaning it with a damp rag as it might just be covered with paper dust.

Read Full Q/A … :
Unknown Printer

HP Laserjet printer page counter backward move
ANSWER : On all HP laserjet printers if you power them off the page count will decrease back to the nearest 10. For example, if the page reading is 123,799 and you power it off, the page count will go back to 123,790.

Read Full Q/A … :
Unknown Printer

printer not working
ANSWER : Not knowing which printer model (out of over1200) it’s hard to say how to clean the print head. Without the make and model number there is no way we can offer any sound advice.

Read Full Q/A … :
Unknown Printer

Color LaserJet 2500 new drum doesn't work.
ANSWER : The drums have a chip on them and it should have reset when you installed it. If not, then read this thread.

Read Full Q/A … :
Unknown Printer

epson printer problems
ANSWER : My Printer Has A Internal Erro

Read Full Q/A … :
Unknown Printer

All panel lights blinking, printer doesnt respond
ANSWER : This is very easy process, you must change a new one

Read Full Q/A … :
Unknown Printer