My printer doesn't print no more Lexmark X5260

Lexmark Optra T

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Restart your printer. In some cases, a simple restart can fix the issue. Unplug the printer and check if there is any paper stuck in the machine, and if the toner is installed correctly. If all seems fine leave the printer disconnected for half a minute, then reconnect it and resume the print job.

Many printer models won`t print if there`s a loose USB connection or if they`re out of ink or paper. Verify your printer`s ink levels, clean the printhead, fill the paper tray, and avoid using substandard paper.

1: Check Printer Power, Cables, and Paper

Check that the correct paper is properly loaded into the printer and is not jammed. Replacing damaged cables, plugging in loose or disconnected cables, and fixing paper jams as necessary may resolve the issue.

If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.

Some of the most common printer problems that most of us have experienced include paper jamming, slow printing, uneven printing, and wrong colour output. If you use your printer frequently, we know how annoying it can be to have persisting problems with the printer.

Most printers will stop working when they`re out of paper, ink or toner, or if the unit detects an issue with the ink or toner cartridge. When this occurs, you might receive an error message or notice blinking green or amber lights on your printer.

The Blank Pages setting is set to print any `blank page` commands used by the software/program on the computer. Use the Local Printer Setup Utility program on the computer and access the printer settings. Locate the Blank Pages setting. Make sure that the Blank Pages setting is set to Do Not Print.

Warm water can often loosen ink that has dried on the nozzles. Other times you`ll need Windex, or some other ammonia-based solvent, for a deeper cleaning. Turn your printer on. It will begin to run through its initialization startup process.

The most common reason why a printer may print blank pages is due to insufficient ink. Nevertheless, while this is the first thing we should check, there could be a number of other possible causes to consider (connection failure, lack of space on the hard disk, clogged injectors, etc.).

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

when printing front and back, the front will print well but the back will fade

ANSWER : It happens because second side voltage is much higher and the board breaks. Are you getting this issue in auto duplex only, or same error you are getting when you print second side manually?

Read Full Q/A … :

Lexmark Optra T

my printer prints only cyan and black

ANSWER : If it was printing OK before you refilled the cartridge and you cleaned the heads, then your only other option would be to replace the cartridge.

Read Full Q/A … :

Lexmark Optra T

Lexmark Printer Problems

ANSWER : lexmark printers can be fixed . just follow the steps . uninstall the printer and drivers and install the printer driver and setup again from lexmark and than make sure you internet password and you are all set to go for more visit http://lexmark.technical-care.com/ and i hope this will help you . thanks

Read Full Q/A … :

Lexmark Optra T

Lexmark Printer Problems

ANSWER : just put them in a dark room together. they’ll make out eventually.

Read Full Q/A … :

Lexmark Optra T

Printer not printing

ANSWER : Try removing the inks, turn the printer upside down and shake it and see what falls out.

Read Full Q/A … :

Lexmark Optra T

Printer won't print

ANSWER : Wow, you’re just a wealth of information. Take it in for service or buy a new one.