Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Check1 Make sure that the printer is turned on. Check2 Make sure that the Wi-Fi lamp is lit on the front side of the printer. If the Wi-Fi lamp is off, Wireless LAN is inactive. To activate Wireless LAN, press and hold the RESUME/CANCEL button, then release the button when the POWER lamp flashes white 10 times.
Start by checking your hardware

If you`re using a wired printer, make sure that the printer cable is properly connected from the printer to your PC. For wireless printers, check the wireless connection. Make sure the printer`s wireless option is turned on and available.

Your printer should have been packaged with a USB cable regardless of whether it is a wireless or wired printer. Plug the cable into your printer and your computer`s USB port. The direct linking should trigger your computer to recognize the printer and start up the software needed to complete the installation.
The easiest way to connect the Canon printer to the computer is via a USB cable. It`s the traditional method of connecting devices. One end of the USB remains connected to the printer, and the other must be connected to the computer`s USB port.
– The printer driver may not be installed correctly. Uninstall and re-install the printer driver. Make sure that there is a direct connection between the printer and USB port of the computer. Reboot the computer with the printer`s USB cable unattached and reconnect the cable once the computer has restarted.
Make sure that both ends of the USB cable are correctly inserted into the computer and the printer. Try disconnecting and reconnecting the USB cable at both ends. Disconnect the printer and the computer and reconnect them. Try another USB port if available.
Check6 Make sure wireless signal is strong. Monitor signal strength and move printer and wireless router as necessary. Place the printer and wireless router where there are no obstacles between them. Wireless communication between different rooms or floors is generally poor.
With the printer powered on, select Setup . Select Device settings . Scroll to the bottom of the menu list and select Reset settings.
Printers show up under “unspecified” when Windows cannot associate an appropriate driver. Reference this article to find drivers for your Brady printer: How to Find Windows Printer Drivers for Your Brady Printer. If you have recently installed the driver, simply rebooting your PC can resolve the unspecified status.
Remove and Re-Add Your Printer in Windows

If this happens, go to Settings > Devices > Printers & Scanners, select your printer, and remove it. Then click Add a Printer or Scanner to re-add it to the device list.

Make sure that both ends of the USB cable are correctly inserted into the computer and the printer. Try disconnecting and reconnecting the USB cable at both ends. Disconnect the printer and the computer and reconnect them. Try another USB port if available.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Canon Printer does not print blue ink
ANSWER : I was also facing same issue with my printer. I tried a lot to fix that however I was not able to fix that. I got this link http://www.printer-techsupport.com/Canon-printer-support.htmlover the internet. I just visited and made a call on their toll free and got instant help for my printer.

Read Full Q/A … :
Unknown Printer

Canon MP530 won't print black
ANSWER : I have the same problem with my canon MG6120, no PGBK. all other colors print beautifully. I am guessing the purge unit needs attention. I have cleaned the print head several times. Your advice would be appreciated.

Read Full Q/A … :
Unknown Printer

Canon Pixma MX882 won't print black text
ANSWER : Yeah I’m having the same problem with my Canon MX882. I’ve refilled the pigment tank, cleaned the print head and I still get no pigment black at all. I think it has something to do with the purge unit, but I don’t see any instructions on how to clean it. If I can figure it out, I’ll let you know.

Read Full Q/A … :
Unknown Printer

Print problem with Canon MP620
ANSWER : Open the front of the printer.

Read Full Q/A … :
Unknown Printer

Canon MP600 uses color ink to print black and white…
ANSWER : Have you tried setting the print out to grayscale only (black and white)?

Read Full Q/A … :
Unknown Printer

Canon i560 Will not print black
ANSWER : Dang, it worked for me then wentback to normal (not working) after the test page. Oh well not bad for a 10 year old bubble jet.

Read Full Q/A … :
Unknown Printer

Canon MP560 PGBK not printing top grid
ANSWER : Hello, I have the same problem a number of people on this forum have raised in my Canon IP4500 – the PGBK ink is not printing at all, despite several deep cleansing cycles, soaking the print head overnight a few times. If you could advise any potential fix, that would be great. My email is [email protected]

Read Full Q/A … :
Unknown Printer

Canon Pixma MP610 won't print in black
ANSWER : Printer cleanings use wet ink to clear dried up ink. Yeah, that works real well. The best way to clean the heads is remove all the ink tanks. Next to the tanks on the right, there is a plastic release lever. Pull up on it and it will release the heads. Reach in and pull them out. Take the heads over to the sink and run hot tap water into the screen for the black and then turn it over and run it over the heads on the bottom. Repeat a few times and reinstall.

Read Full Q/A … :
Unknown Printer