Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Dried Ink Buildup on the Printhead

If the print cleaning cycle doesn`t work, dried ink may be the culprit. Take the printhead out and wipe the nozzles clean to remove any buildup. Depending on the model of your printer, this may be difficult—some printheads are harder to remove than others.

In the majority of cases, printers` self-cleaning mechanisms clean blocked printer heads by flushing the nozzles with air. The air works to dislodge dry ink inside the cartridge channels and also push it out. The intensity of the self-cleaning process of printers is usually not very strong.
If the hot water soak did not unclog the print head, place the cartridge printer head in isopropyl alcohol and allow it to soak overnight. Use a damp paper towel to wipe off the print head area and dry carefully.
Print head cleaning uses both color and black ink. To avoid wasting ink, clean the print head only if print quality declines (for example, if the printout is blurry or the color is incorrect or missing).
You may need to clean the print head up to 4 times. You can also turn off your Epson printer and wait at least 6 hours. Then try printing again.
If streaks or white lines appear on your labels, you can clean the print head. Caution: Do not use benzine, paint thinner, or other chemicals to clean the printer.
You may need to clean the print head up to 4 times. You can also turn off your Epson printer and wait at least 6 hours. Then try printing again.
There isn`t much that can be done in the way of repairing a printhead, only replacing parts. By the time a printer technician assesses your printer, gets the part you need, and replaces it, you could have ordered a new printhead from allprintheads.com and replaced it yourself for much less.
There isn`t much that can be done in the way of repairing a printhead, only replacing parts. By the time a printer technician assesses your printer, gets the part you need, and replaces it, you could have ordered a new printhead from allprintheads.com and replaced it yourself for much less.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

How do you clean the printer head and where is located
ANSWER : It is a laser printer and it has no printer head. Only inkjet printers have printer heads.

Read Full Q/A … :
Unknown Printer

Epson Artisan 835 print head cleaning question
ANSWER : I had the same problem. After reading the comments, I tried Liquid Wrench spray. 1st try got about sixty percent improvement. Tried again this time I let it set for about 10 min then did a head cleaning. Completely solved the problem. I am a little concerned about its use on plastic. So far so good.

Read Full Q/A … :
Unknown Printer

How To Buy Your Head Cleaning Solution
ANSWER : The new site owner doesn’t sell kits anymore. Try doing a search for Epson head cleaning kit on eBay.

Read Full Q/A … :
Unknown Printer

What fluid to clean epson head?
ANSWER : There’s only 1 left, so better hurry. http://www.rjettek.com/jiecr-ocp-rinse-epson-blue/

Read Full Q/A … :
Unknown Printer

black will not print after cleaning the nozzle head 5 times
ANSWER : There’s way to clear your print head. Go to Youtube site of Jose Rodriquez. He’s got a video on just about every aspect of printing. Put something like a folded shop towel, spray it with Windex, no deodorants etc. just the original Windex, no ammonia D, and some alcohol (not rubbing alcohol but 90 percent or some such). Fold towel into a strip about and inch and a half or so and put it in the cup like trough that the print head follows when printing. Start printer. Let printer just begin. When head moves out of the dock, and unplug the printer. Now you can move head manually. Maneuver head over the towel. Leave it overnight. You may need to do this many times. I had about given up when my print head cleared up. I think you need to see Jose’s video, then you’ll understand better. If you can’t find it or you need more help, feel free to email me. There are other resources, but I wouldn’t go for commercial cleaning kits. That’s just me. And I’m leery of trying to put pressure through the head. I hope this helps. It’s kind of brief. There is a man I found who had written almost a book on the subject. He’s not anxious for his name to be given out however.

Read Full Q/A … :
Unknown Printer

One small segment (nozzle check) missing/clogged – cleaning?
ANSWER : You need to buy a “head cleaning kit”. What that does is inject cleaning fluid through the ink port on top down through the heads using a syringe. They don’t cost much. Do a search on eBay for “Epson head cleaning kit” There’s lots of them. Another idea stolen from this site. Gotta love the internet.

Read Full Q/A … :
Unknown Printer

cleaning nozzles
ANSWER : Inject cleaning solution down into the heads. You can search Epson head cleaning kit on Ebay

Read Full Q/A … :
Unknown Printer

no color cart. new & clean
ANSWER : yes

Read Full Q/A … :
Unknown Printer