Canon MultiPass MP390

Experienced technical support provide their insights in answering this question :
Thank you very much. Followed the reset and alarm light instructions and works great! Saved at least $100 service fee and/or replacing our printer.

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

The bottom part of the printer Canon Pixma is fully covered with sponges and forms the so-called waste ink tank. Each time you clean the printheads on your inkjet printer, ink is sucked out of the printer`s print nozzles and out of the cartridges, and into the sponges on the bottom of the printer via one or more hoses.
A waste tank is whenever the printer does self-cleaning, it dunks some waste ink into a waste pad. Therefore if you do lots of cleaning, the waste tank will be full. You can look at the printer`s right back corner; there`s a screw secure the cover.
Insert the Waste Ink Drain Tube coupler into the Waste Ink Drain, on the back of the printer. It will click and lock into position. Loosen the Black Plastic Cap on the top of the Waste Ink Tank. The waste ink will flow out of the Waste Ink Drain Tube.
When the message “Ink absorber full.” is displayed, the printer stops printing and needs ink absorber replacement. Push the power button to turn OFF the printer, and then contact the service center for replacement.
The error “Ink Absorber Full” means that the internal ink absorber or flushing box will need to be replaced. The need to replace these items and the time period before replacement is dependent on the number of purges and flushes required to clean the ink system.
11 ink cartridges per second and 1 million cartridges per day are thrown away. That`s a waste we should stop.
Conclusion. If you want to re-use your waste ink, think about ways to use it for things like tie-dyeing, caligraphy or any manner of other craft activities (be aware that the inks are unlikely to be suitable for use by children!) but don`t use it in your printer.
Ink tank printers can print many more pages thank cartridge printers before a refill is needed. It depends on the printer, of course, but an ink tank printer commonly can print 7,000 pages in color, and 5,000 in color. Conventional cartridges are usually only good for 300 to 1000 pages.
Waste Ink Pads are actually a number of porous pads in the printer that collect, distribute, and very importantly contain the ink that is not used on printed pages.
You will hear some clicking noises, but the lid should come right off. Empty your ink into an empty bottle if you wish to save it. You can always just dispose of this ink, but I have another regular Ecotank printer that I use it in. Repeat the same steps with the remaining 3 ink bottles.
Can Canon ink cartridges be refilled? Yes, black and tri-color Canon cartridges can be refilled with a refill kit. The process can be messy (it requires inserting a syringe full of ink into the ink chamber) but can save a lot of money in the long term.
You have the option of disposing of your existing cartridge and replacing it with a new one, but the far most cost-effective option is to empty this waste toner cartridge yourself. Below, we`re going to step you through how you can save on your printing expenses by handling this process yourself.
Look for a black rubber frame under the ink cartridge assembly. This contains the ink absorbing pads.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

MP390 Waste ink tank full.
ANSWER : Thank you very much. Followed the reset and alarm light instructions and works great! Saved at least $100 service fee and/or replacing our printer.

Read Full Q/A … :

Canon MultiPass MP390

HP deskjet 460 Waste ink tank full
ANSWER : I worked fixing printers for 5 years for Verizon and some of the older printers were notorious for the waste receptacle filling and overflowing with ink. My solution was good old warm water. Remove the waste container and scoop out as much as you can with a small screwdriver, wiping the discard on a paper towel, then just run warm water from the faucet into the container till all the residue is removed. This is just water soluble ink folks, if you want to test it, scoop out a glob and dissolve it in warm water, its easy as pie. I never once bought a new ink discard reservoir. I just cleaned out my mobile 460 printer reservoir by the same method. There are no electrical connections its just all plastic.

Read Full Q/A … :

Canon MultiPass MP390

Epson 2400 waste ink tank full?
ANSWER : The “waste tank” is actually just a foam sponge cut to fit space under the print head travel. If you’re careful you can get it out with a pair of long ! tweezers, rinse it in water and dry it. It may come out in pieces…assemble them as a template to make a new one or try to buy a new one on- line. Before putting it back in clean the whole region under the head travel as best you can with plenty of paper towels. This is a messy job, so prevention will save a lot of cleanup. Good luck.

Read Full Q/A … :

Canon MultiPass MP390

ip4200 INK TANK RESET and WASTE TANK RESET
ANSWER : Different cartridges, notwithstanding, don’t have a ‘fill gap’ so you’ll have to make one yourself. Our refill units for these sorts of cartridges accompany a smolder apparatus which is utilized to blaze (really dissolve) a fill opening in the cartridge . Our refill guidelines will demonstrate you precisely where to make the fill opening (you would prefer not to make it in the wrong spot). A blaze device come standard in all refill packs for cartridges without processing plant made fill openings. if you want to get proper detailed information then call us at 1-888-924-2961for more information regarding canon printer support.

Read Full Q/A … :

Canon MultiPass MP390

waste ink tank
ANSWER : There is no waste ink “tank”. There are some sponges and they usually are about 1/4 saturated when you get the message. If you want to go through the trouble to remove them, you can just wash them in hot water and dry them out as the ink is water soluble. Or, you can search the web for a waste tank reset procedure and not worry about it.

Read Full Q/A … :

Canon MultiPass MP390

Full Ink Tank in Canon Pixma ip4000
ANSWER : It had been exactly the same subject, could not find an appropriate broker and process for earnings finally had to rummage through the Web, and there I came across this page http://optioninvest.org .Possibly you’ll find there is a therapy to your condition, thanks for the fascination!))

Read Full Q/A … :

Canon MultiPass MP390

MP170 (5b00) Ink Tank Full Error
ANSWER : Thanks, worked a treat!

Read Full Q/A … :

Canon MultiPass MP390

Reset ink absorber full
ANSWER : Free download of resetter here http://www.k58n.com/3ammresetter/canonresetter/410.html

Read Full Q/A … :

Canon MultiPass MP390