Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Ink may have run out (The lamp on the ink tank flashes). If printing is in progress, you are recommended to stop printing, replace the ink tank, and then print again.
Some parts of the printer are broken, or there`s an internal error with the device. You need to restart your printer if you notice the `Resume` light and the Power light blinking together. There`s an improper connection. A flashing `Resume` light can also indicate a paper jam.
If a problem occurs and the printer is not working properly, the (Alarm) indicator (orange) comes on and the following service calls appear in the Printer Status Window.
Chances are that the flashing lights are an indicator that a printer component is malfunctioning. HP has a diagnostic tool called the “Print and Scan Doctor” that can help you find the broken part.
With the printer powered on, select Setup . Select Device settings . Scroll to the bottom of the menu list and select Reset settings.
Meaning: the paper exit tray is closed / Paper jam. Solution: the paper is jammed. Remove the jammed paper, replace the paper correctly in the printer, and then press the Resume / Cancel button.
An alarm is a persistent indication of a fault that clears only when the triggering condition has been resolved.
A system code is a four to six-digit numbered password that is used to arm and disarm your security system as well as provide you access to perform various other functions within the system. The primary reason these codes exist is to ensure that the person using the system is meant to have access to it.
If you wait several minutes and it continues to blink, turn the printer off, then back on. If it will not turn off, unplug the power cord from the back of the printer. Unplug the power cord from the power source. Wait 30 seconds, then plug the power cord back into the power source.
Open the printer`s web page and Sign in as Administrator. On the General tab select Reset Factory Settings in the menu.
The reset key is a single use key and once used cannot be used again. All EPSON printers have inbuilt counters that count up the number of pages a printer produces, the number of head cleans executed and various other attributes. Once a critical level is reached the printer will enter its service mode.
The ink has run out. Replace the ink cartridge and close the paper output cover. If printing is in progress and you want to continue printing, press the printer`s Stop/Reset button for at least 5 seconds with the ink cartridge installed.
– ON lamp flashes green: The machine is getting ready to print, or printing is in progress. – Alarm lamp flashes orange: An error has occurred and the machine is not ready to print.
Once the printer has found your Wi-Fi, you will see the light on the printer begin to flash. Once the light stops flashing, your printer is now connected to the Wi-Fi network. To confirm that your printer is correctly connected to the Wi-Fi network you can do a test print of your printer`s network settings.
Once the printer has found your Wi-Fi, you will see the light on the printer begin to flash. Once the light stops flashing, your printer is now connected to the Wi-Fi network. To confirm that your printer is correctly connected to the Wi-Fi network you can do a test print of your printer`s network settings.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

MP390 Waste ink tank full.
ANSWER : Thank you very much. Followed the reset and alarm light instructions and works great! Saved at least $100 service fee and/or replacing our printer.

Read Full Q/A … :
Unknown Printer

Epson Stylus Photo R230 – flashing red lights fix
ANSWER : REDLIGHT

Read Full Q/A … :
Unknown Printer

Flashing Lights & no display
ANSWER : Since it’s kind of old and there aren’t any parts available, you should probably go looking at replacement models. Saw a similar model (Canon) at Walmart’s this week that was wireless for $49.

Read Full Q/A … :
Unknown Printer

ALL LIGHTS FLASHING
ANSWER : Read this thread, it mostly pertains to the 760 model, but you might find something there that will work with your model.

Read Full Q/A … :
Unknown Printer

flashing printer lights
ANSWER : The contacts between the cartridges and the printer may need cleaning; the cartridges may be low but not out; or there could be a job stuck in the print que.

Read Full Q/A … :
Unknown Printer

printer clicks three times when starting then error flashing
ANSWER : Check the drum unit and cartridge . Check the paper pick-up mecanism

Read Full Q/A … :
Unknown Printer

My epson wf-3640 has two flashing blue lights going and will not print on command?
ANSWER : I think it is illicit anticompetitive behavior both quick essay service here in Australia and likely in different purviews too for them to look to cripple non specific ink use – and now it turns out it impairs their own particular ink and printer as well.

Read Full Q/A … :
Unknown Printer

Flashing Amber light
ANSWER : Make 1) check that the back of tray that is adjustable is against the paper and 2) the paper sensor for the tray moves freely – if it gets stuck it will cause that error.

Read Full Q/A … :
Unknown Printer