How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Remove all of the new cartridges you had installed and re-install the old (empty) cartridges that worked. Restart the printer, this should remove the not recognised error (and tell you some are empty).
Press the button on the chip-reset tool for several seconds until the LED light on the device goes off. Then, unlock the reset tool from the cartridge. Use the resetter with other cartridges and install them back into the corresponding slots in your printer. Voila!
Another reason for ink cartridge failure is that your cartridge chips or printer`s contacts might be dirty. It`s easy to fix your printer ink not working using a lint-free cloth and isopropyl alcohol. Take out the new cartridges from the printer and place it on a flat surface with a paper towel underneath.
Yes, you can reset the print settings to their original, default values. Press and hold down the Cancel button for 3 seconds. When the message to reset the printer to default settings appears, press OK to reset the print settings.
If your printer is not detecting the cartridges, there might be the following possible reasons: The cartridge chip is dirty or damaged. They are not compatible with your printer. They are not installed properly.
The ink cartridges may not have been installed using the correct procedure, or they may not be seated correctly. Follow the instructions below to correctly install and reseat the ink cartridges. Note: This product is designed to use only genuine Epson-brand ink cartridges.
Verify the ink cartridge(s) is inserted properly. Some cartridges snap in place, and if they are not inserted fully, the printer won`t print anything. If a lever is moved from its original position to allow for installation of ink cartridges, ensure it is returned to its original position.
Push down all the pins on the resetter. Depending on the printer model, there may be a button rather than pins. Keep pushing the pins/button on the cartridge until the LED lamp on the cartridge turns green, or it indicates with a beeping sound that the toner cartridge has been reset.
First, remove and reinstall the designated cartridge 2-3 times until it securely sits in the slot to overcome an HP printer cartridge error. Next, turn off the printer and take out all the cartridges. Gently wipe the cartridge and carriage contacts with a dry, lint-free cloth and reinstall again.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
oki c511 drum reset, toner reset, turkey chip reset
ANSWER : If you switch off toner control, you should keep an eye on your prints, and we aware of ink quality, so filling colours as they’re emptying. Nevertheless, it’s an small disturb for the a,ount of money you’re saving ¿isn’t it?
reset toners and image drum life
ANSWER : They both have chips that need to be replaced. There are videos on YouTube that show how to refill the toners and how to replace the chips.
RESET OKIDATA TONER DRUM
ANSWER : HI there, oki image drums contain a fuse. You can reset them if they are working/printing ok by replacing the fuse. Hope this helps. The fuse is located inside the unit so is a bit fiddly.
Resetting of chip for hp toner Q6000A
ANSWER : HP Color Laser Jet 1600 – Thanks for all the above information. Even though the 1600 is a different printer, I followed the above: “…go to “System Configuration”; then to “Print Quality”; I then get a choice of “Replace Supplies” and then “Overide Out”…” Selecting “Overide Out” got my 1600 back to printing, although I did have do perform the steps TWICE before it seemed to take affect. Not sure what was going on, but I’m happy that people put the information out there for the rest of us to have.
ip4200 INK TANK RESET and WASTE TANK RESET
ANSWER : Different cartridges, notwithstanding, don’t have a ‘fill gap’ so you’ll have to make one yourself. Our refill units for these sorts of cartridges accompany a smolder apparatus which is utilized to blaze (really dissolve) a fill opening in the cartridge . Our refill guidelines will demonstrate you precisely where to make the fill opening (you would prefer not to make it in the wrong spot). A blaze device come standard in all refill packs for cartridges without processing plant made fill openings. if you want to get proper detailed information then call us at 1-888-924-2961for more information regarding canon printer support.
RESET OKIDATA TONER DRUM
ANSWER : Hi guys
Samsung ML-1610 toner low warning need reset help!
ANSWER : in my printer shows the online error problem
Brother toner cartridge low toner override
ANSWER : Thank you. You are a genius. Of course this is not a substitute for cartridge replacement but it is great for extending the life of the color cartridges and allowing you to continue to print until you can get new cartridges.