Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Overloading the paper tray, not properly setting the alignment guides, loading paper skewed, loading different thicknesses of paper in the tray, or using paper that isn`t appropriate for your particular printer can all result in a jammed printer.
If your paper jams are happening randomly and you can`t identify the cause, it could be that your printer rollers are dirty. Over time, dust and debris can build up on the rollers and cause the rollers to grab onto paper unevenly, which can lead to paper jams.
your pickup roller is dirty and the printer can`t grab a piece of paper. it will say paper jam when it does this. get a drop of dishsoap and clean the pickup roller of your printer with this. scrape at it with your fingernail to get the roller clean and wipe it off with a damp washcloth.
If the paper is even slightly askew, the rollers will pick it up a little crooked, and — guess what — the crooked sheet will immediately get jammed. So even though there`s no paper stuck when you start printing, the loose paper guides are ensuring that a sheet gets jammed whenever the printer starts doing its thing.
The following are the top reasons why paper jams occur:

unsupported paper/media is used. incorrect paper settings in the tray and/or the print driver. paper loaded incorrectly and/or paper edge guides not adjusted properly in the tray. humidity and/or paper condition and storage.

Among the more common technical issues that may bring down a printer are disconnected cables, malfunctioning routers, and low ink levels. Moreover, software problems such as interrupted connections or incorrect settings in your system`s drivers can also cause your printer to show up as offline.
During a print job, the printer stops feeding pages, and a Paper Jam error message displays on the printer control panel. This indicates that paper might be jammed inside the printer. note: Paper jams can be real or false. The printer might report a paper jam even when there is no jammed paper.
Updated: 02/07/2022 by Computer Hope. A paper jam is when paper or other printed material gets stuck or lodged in a printer and cannot eject. When this occurs, the printer does not function properly until the paper is manually removed.
Streaking, smudging, black lines, and double images are all symptoms of a bad fuser. When you notice these printing defects and experience problems, such as paper jams or wrinkles, this is a good sign to replace the fuser kit.
If your printer has a paper path cover behind the carriage, remove the cover, and then remove any jammed paper. Pull out the input tray, and then remove any jammed paper. If your printer has a bottom cleanout door, carefully lift the printer and look under it, and then remove any jammed paper from the bottom cleanout.
Remove all printer paper from the tray and then reload it

If paper is stuck at the entrance to the printer, slowly and gently pull it out one sheet at a time, starting in the middle of the stack. Once you remove any large sheets, inspect the machine to make sure you haven`t left behind any small bits of paper.

If your printer has a paper path cover behind the carriage, remove the cover, and then remove any jammed paper. Pull out the input tray, and then remove any jammed paper. If your printer has a bottom cleanout door, carefully lift the printer and look under it, and then remove any jammed paper from the bottom cleanout.
Worn or dirty rollers can decrease friction and increase jams. Check the rollers for wear and gently clean them with a mild soap solution. If the paper is fed into the equipment at an angle or skewed in some way, you can end up with crooked folds or paper jams.
Worn or dirty rollers can decrease friction and increase jams. Check the rollers for wear and gently clean them with a mild soap solution. If the paper is fed into the equipment at an angle or skewed in some way, you can end up with crooked folds or paper jams.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Paper Jam and carriage jam code when nothing is jammed
ANSWER : Did you try cleaning the encoder strip that runs through the cartridge assy.? Use Window Cleaner on a paper towel. Also, check inside on the right. I’ve seen a lot of times where there is a folded up scrap of paper that stops the carriage from going all the way to the right.

Read Full Q/A … :
Unknown Printer

Paper Jam error but no paper jam
ANSWER : Obviously you didn’t get all the paper cleared out. There is a small scrap in the paper path causing the jam when the paper hits it. You can try clearing it out by inserting something stiff like a piece of file folder from the back of the printer into the paper path and pushing the offending piece out that way.

Read Full Q/A … :
Unknown Printer

Keep getting a paper jam message. There is no jam.
ANSWER : You can quit wondering. Parts are unavailable. I’ve seen posts where people have 3D printed the parts or machined them out of metal.

Read Full Q/A … :
Unknown Printer

Paper Jam when printing color.
ANSWER : I have also this problem. I just bought a new color printer. Installing was fine, and had printed one page of a print test on the first setup, but when it started to print the second page, the paper jams. I am a tutor at DissertationHelp.uk and I also want to solution in this problem.

Read Full Q/A … :
Unknown Printer

Canon mx410 Paper jam message, but no paper jam?!
ANSWER : I have exactly the same problem, no answers 😳

Read Full Q/A … :
Unknown Printer

Minolta Pageworks L printer
ANSWER : I’m not familiar with that model. I do have to say that 8 years in storage will have detrimental results. I have never seen any printer request a transfer roller change. They do come as part of maintenance kits in HP series printers. Transfer rollers really don’t wear out. Worst that happens is they get toner on them. Their function is to charge the back of the paper and pull the toner down on it. That being said, you probably will have a host of other issues. Any drum wiper blade will have deteriorated necessitating replacement of the drums. The fuser assy. will probably have suffered damage to the pressure roller from sitting in the same position without rotation for 8 years. Depending on storage conditions, the toners might have suffered as well. In my opinion, it will cost you more to fix it than replace it. Test print procedure is Chapter 3, item 5 in the user manual http://printer.konicaminolta.net/drivers/manuals/pageworks/cpw.pdf

Read Full Q/A … :
Unknown Printer

scane cutting problem
ANSWER : my konica minolta bizhub 600 give ne a scane cutting problem how i m solve this problem

Read Full Q/A … :
Unknown Printer

Paper Jams
ANSWER : Not familiar with that printer, but I will tell you about models I am familiar with. On those, the backstop of the tray which fits against the back of the paper signals the size of the page to the printer. It does so by moving some arms on the side in and out so they contact 1 to 3 switches in the printer and that tells the printer what size. Basically, that is the problem you are having, the printer thinks that a different size of paper is in the tray than what you are telling the printer to use through the software.

Read Full Q/A … :
Unknown Printer