Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Clean the Cartridge Contacts: one of the most common reasons you might get a cartridge problem error when your cartridges are new and full is the contacts on the cartridge might be dirty or otherwise obscured from making good contact with the electronics in the printer head carriage.
Check that you have removed all protective strips, plastic coverings and tabs from your ink cartridge. Check and make sure you use the correct ink cartridge for the corresponding Brother printer. Check and make sure that there is no dirt or smudge in the metal contacts of your ink cartridge or printer.
Press the button on the chip-reset tool for several seconds until the LED light on the device goes off. Then, unlock the reset tool from the cartridge. Use the resetter with other cartridges and install them back into the corresponding slots in your printer. Voila!
Inspect the cartridge for the metal contacts. Inspect the inside of the printer for the connection point. With a lint-free/dry cloth lightly wipe the contacts on both cartridges and printer to remove any dirt, or residue being careful not to cause any damage. Replace the cartridges in the printer.
Verify the ink cartridge(s) is inserted properly. Some cartridges snap in place, and if they are not inserted fully, the printer won`t print anything. If a lever is moved from its original position to allow for installation of ink cartridges, ensure it is returned to its original position.
Missing colours, streaky prints, smudges and ink blotches are all signs that your printer ink or toner cartridge may be damaged. Some printers will actually warn you if a cartridge is damaged and will refuse to print. This includes HP ink cartridges, Samsung toner cartridges and Canon ink cartridges.
The quick answer is: Yes, you can (if you own a printer model that allows it) — but you shouldn`t keep printing with an empty cartridge for too long. Why? Because running on an empty cartridge for too long can cause your printhead to overheat resulting in irreversible printer damage.
Printers that use two cartridges (one black, one tri-color) can print if one cartridge is empty. To continue printing, remove the empty cartridge from the printer.
The chip resetter tool is a self-contained unit that contacts the cartridge chip to get it to its electronic full setting, telling the printer it is full of ink and ready to print. It is generally used when re-inking a cartridge, because the cartridges must be removed from the printer to complete the process.
If you accidentally insert your inkjet`s cartridges in the wrong color slots, most printers sense the error through circuits that check installed consumables and alert you with an on-screen message. Until you correct this type of installation mixup, your printer simply won`t operate.
Verify the ink cartridge(s) is inserted properly. Some cartridges snap in place, and if they are not inserted fully, the printer won`t print anything. If a lever is moved from its original position to allow for installation of ink cartridges, ensure it is returned to its original position.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

printer cartridge problems
ANSWER : Only suggestion would be to try cleaning the contacts to the yellow cartridge in the printer. Use a slightly moistened paper towel

Read Full Q/A … :
Unknown Printer

Cartridge problem
ANSWER : In binary choices trading depends entirely on just how much you realize the methods and what broker you work! I for myself leafing through plenty of tactics but the very best tactics was included with the newspaper http://bestoptionstrategies.net encourage to use. Broblemy with brokers is not exceptional, and they need to get proven only. It absolutely was there that collected tested. Many thanks for your interest, I am hoping to help in your problem)))

Read Full Q/A … :
Unknown Printer

Expired Ink Cartridges – Any way to move paper with old cartridges?
ANSWER : You could try disconnecting the printer from the computer. Then change the date on the panel to prior to the expiration date. That should fool it.

Read Full Q/A … :
Unknown Printer

problems with printing
ANSWER : Check your settings to make sure they are Left to Right print order. If they are then reinstall printer driver. If that doesn’t correct problem uninstall printer, reboot computer, and reinstall printer.

Read Full Q/A … :
Unknown Printer

Paper Feed Problem on HP R80
ANSWER : In the last examination it is our origination of death which chooses our responses to all the inquiries life puts to us. The most pleasant spot to be is in somebody’s idea; the most secure spot to be is in somebody’s petitions.

Read Full Q/A … :
Unknown Printer

PGBK cartridge not working
ANSWER : Did you try removing the print heads and flushing them under hot tap water?

Read Full Q/A … :
Unknown Printer

Oki C5300 problem : network menu disappeared.
ANSWER : You need MuWin and your NIC firmware to upload to the host, but both things are keep under cover by OKI… Find attached old (and probably useless for you) files; check and say.. (https://mega.nz/#F!oEkA3JKZ)By the way, you should specify what firmware do you need ¿isn’t it? I don’t know yet what firmware uses my c511dn nor what NIC host it mounts… :~(

Read Full Q/A … :
Unknown Printer

Epson, sudden cannot recognise cartridges error
ANSWER : Hi, I have exactly the same problem than you, I’ve been trying to solve it since 6 months. I have an Artisan PX730 WD, and the genuine cartridge can’t be recognized all together. And status monitor indicates same thing than you.

Read Full Q/A … :
Unknown Printer