Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

If the error message, Unknown device appears, this can indicate that there is not adequate power and the PC can not identify the printer correctly. Verify that there are no extension cables and that the power cable is no longer than five meters. Reseat the power cables.
Status unknown means a circumstance where samples were scheduled to be taken by the regional water quality control plant and were not, samples were taken but not yet analyzed by the report due date or where a new discharger has yet to be sampled.
Check Cables and Printer USB Ports

Check all cable connections (including the power cord) on the printer side. If the printer does have power and you`ve properly connected the communication cable, but the printer is still not recognized, try switching to a different USB port on the PC.

The “printer attention required” error is very common and usually occurs when there is an issue with the configuration or the printer is physically having problems.
A User Intervention Required message displays on the computer, and the printer does not print. This issue might be caused by a printer error condition, corrupted print jobs, or wireless connection issues.
Try disconnecting and reconnecting the USB cable on from both ends. Disconnect both your Brother machine and the computer and reconnect. NOTE: When the USB connection confirmation screen appears, click Allow or Yes. (If you are using a USB hub, remove it and connect your Brother machine directly to the computer.)
If you see an “unknown accessory detected near you” message (or similar), it means there`s an item compatible with the Find My network that might be traveling with you. If so, its owner may be able to see your location. You should look to see if something you`re borrowing has such a device attached.
Open the start menu and select Control Panel > Administrative Tools > and choose the Services icon. Locate the Print Spooler service and right-click. Then select the option to “Stop” the service.
Reset. Resetting the printer stops printing and clears the current print job received from the active interface. You may want to reset the printer when there is a problem with the print job itself and the printer cannot print successfully.
Definition of unknown. as in unfamiliar. happening or existing without one`s knowledge unknown to me was the fact that while I was out, my family was hurriedly preparing a surprise birthday party. unfamiliar. unbeknown.
: a place, situation, or thing that is not known about or understood. explorers venturing off into the unknown. : a situation that one is unfamiliar with.
Synonyms of unknown (adj. obscure, mysterious) anonymous.
1 concentrated direction of the mind, esp. to a problem or task. 2 consideration, notice, or observation.
For healthier print heads and more efficient ink consumption, however, it`s better to leave your printer on. Constantly switching your printer off and on will decrease your printer`s lifespan, so try to keep the off/on to a minimum.
The purpose of printer drivers is to allow applications to do printing without being aware of the technical details of each printer model. Printer drivers should not be confused with print spoolers, which queue print jobs and send them successively to a printer.
Whenever a paper tray becomes empty or paper is jammed, an e-mail alert is issued to the registered addresses to notify the printer status.
Select Start , then select Settings > Devices > Printers & scanners . Scroll down to Related Settings and select Print server properties. Select the Drivers tab, and see if your printer is listed. If it is, you`re all set.
First check that the cartridges are correctly inserted and then examine the cartridge chip. If it is dirty, clean it with a cotton swab and a little alcohol, if it is incorrectly set, press it to reset it. Turn off and restart the printer now.
It doesn`t slow down your computer as there are no processes or CPU activity associated with them. It adds clutter to Device manager and in general I would say that you should either remove them or fix them. But it won`t have an impact on performance.
Go to your Google Account:

You might need to sign in. Under “Security,” select Sign-in & security. Select Devices. Next to the device you want to remove, select More Remove device.

Ghost prints happen when the drum or fuser unit within your printer become faulty. Because a fault with this element won`t heat the particles of the toner to a high enough temperature, the marks being made on the paper are much lighter in colour and appear more faded than typical documents.
Click on Device Manager from the context menu. In Device Manager, click on View and select Show hidden devices. Next, expand the Printers section to view your printer.
Unplug all the interface cables before you perform a Factory Reset. Press the Up or Down arrow key to select Initial Setup, and then press OK. Press the Up or Down arrow key to select Reset, and then press OK. Press the Up or Down arrow key to select Factory Reset, and then press OK.
Much remains unknown about his early life. Her music was previously unknown outside of Asia. An unknown number of cases go unreported. The victim`s attacker was unknown to her.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Error message to load paper and push OK, but not out of paper
ANSWER : I assist the binary options for a long time, and only half this past year I decided to alter the strategy for a better, she called for help Bing and he gave me this web site http://bestoptionstrategies.net .Now I focus on the suitable technique for themselves, and things gone up. I think everybody else faced with this particular problem. I believe my estimation will soon be helpful to you.

Read Full Q/A … :
Unknown Printer

message error: ADF paper jam
ANSWER : There is a thin plastic arm that the paper pushes on. It is spring loaded. If it doesn’t return and unblock the sensor after the paper passes it, you get the paper jam warning. I’m guessing that is the spring you are referring to.

Read Full Q/A … :
Unknown Printer

error message
ANSWER : Search it on google

Read Full Q/A … :
Unknown Printer

Error message pump motor stalled
ANSWER : Hy,

Read Full Q/A … :
Unknown Printer

Error message reads remove and check right cartridge
ANSWER : You can try cleaning the contacts on the back of the cartridge and the ones that they contact in the printer. Other than that, you have to replace the cartridge. I once had one that did the same thing. I swapped the cartridge with another printer of the same model and both printers worked fine. I swapped them back and the original printer got the same error. The other printer had no problem with either cartridge. I swapped them back and left them that way.

Read Full Q/A … :
Unknown Printer

13.01.00 "jam in tray …" error message
ANSWER : I have never seen that problem. Really bizarre. I have to say that I’ve never replaced a main motor in any printer that I can remember and we’re talking thousands of them. I would suggest that if you have a voltmeter that you check the main motor contacts during the warm up procedure and see if they are indeed getting any voltage and go from there. If there is voltage, it’s the motor. If not, then most likely the controller board. If you don’t have a meter, it’s cheaper to buy one than start buying parts for the printer.

Read Full Q/A … :
Unknown Printer

Error Message
ANSWER : Are you sure that is SO2? HPs don’t give a code like that, maybe 50.2? which is a fuser error and replacing the fuser usually clears that if that is the code you’re getting.

Read Full Q/A … :
Unknown Printer

Error Message 4F on MFC 210C
ANSWER : Basically this kind of error caused by loss of voltage on print head. If this is the case then I suggest to buy a new printer rather than replace print head. Print head might be too costly.

Read Full Q/A … :
Unknown Printer