Epson WorkForce 645
There is no paper in the automated Document Feeder, but always this message about paper jam. I read that it’s due to the small spring and I tried to do something with it… and it worked (2 times). But the problem came back, and now nothing can fix it so far.
Experienced technical support provide their insights in answering this question :
There is a thin plastic arm that the paper pushes on. It is spring loaded. If it doesn’t return and unblock the sensor after the paper passes it, you get the paper jam warning. I’m guessing that is the spring you are referring to.
How to Identify and Fix Common printer Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
When using the automatic document feeder (ADF) to copy, scan, or fax, the error message `Paper Jam: The original is jammed in the automatic document feeder (ADF). Open the ADF cover, remove and reload the original, and then try again.
Shut the printer off, get a flashlight, and try to see inside. Make sure no label fragments have jammed up your printer before proceeding. You might need to check underneath the printer and shake it out to dislodge any loose paper or other debris that may have gotten stuck inside.
When you use the automatic document feeder (ADF) to copy, scan, or fax, the error message `The original has jammed or the document feeder (ADF) is dirty. To remove the original, open the ADF cover. To clean the ADF, see the user guide` displays on the product control panel.
Hold the ADF cover from top and open it by gently pulling it up until it stands vertically to the unit. This will expose the ADF rollers as well as the ADF tray tabs that hold the tray to ADF assembly. To remove the ADF Input Tray, grasp the other end of the ADF Input tray.
The Automatic Document Feeder (B81321 ) allows you to automatically load multi-page documents into your scanner. This is useful for OCR (optical character recognition) scanning, or for creating an image database or PDF files.
A piece of paper stuck in the paper tray or inside the printer can create a paper jam. Paper jams can occur for a variety of reasons, such as overloading the paper tray, loading different thicknesses of paper in the tray, or using paper that isn`t appropriate for your particular printer.
your pickup roller is dirty and the printer can`t grab a piece of paper. it will say paper jam when it does this. get a drop of dishsoap and clean the pickup roller of your printer with this. scrape at it with your fingernail to get the roller clean and wipe it off with a damp washcloth.
Hold the ADF cover from top and open it by gently pulling it up until it stands vertically to the unit. This will expose the ADF rollers as well as the ADF tray tabs that hold the tray to ADF assembly. To remove the ADF Input Tray, grasp the other end of the ADF Input tray.
If the Automatic Document Feeder is open, close it and then try again. If the Automatic Document Feeder is already open while you are scanning, remove any jammed paper; reload any document not yet scanned and then restart EPSON Scan.
If an error message appears indicating the printer`s ink pads are nearing the end of their service life, contact Epson support to replace them. The message will be displayed at regular intervals until the ink pads are replaced.
The Automatic Document Feeder (B81321 ) allows you to automatically load multi-page documents into your scanner. This is useful for OCR (optical character recognition) scanning, or for creating an image database or PDF files.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
My printer feeds through one piece of paper all the way and then a half piece of paper and stops. I pull out the paper to stop the paper jam and then it prints but sounds rough. After printing, it doesn't feed the paper all the way through.
ANSWER : And the first 2 sheets, the full and half sheet that go through first, are blank.
Read Full Q/A … :
Epson WorkForce 645
Paper Jam error but no paper jam
ANSWER : Obviously you didn’t get all the paper cleared out. There is a small scrap in the paper path causing the jam when the paper hits it. You can try clearing it out by inserting something stiff like a piece of file folder from the back of the printer into the paper path and pushing the offending piece out that way.
Read Full Q/A … :
Epson WorkForce 645
message error: ADF paper jam
ANSWER : There is a thin plastic arm that the paper pushes on. It is spring loaded. If it doesn’t return and unblock the sensor after the paper passes it, you get the paper jam warning. I’m guessing that is the spring you are referring to.
Read Full Q/A … :
Epson WorkForce 645
hp 8600 pro when power on, paper jam message appear but there is no paper jam in the tray
ANSWER : Hp 8180 Photosmart All In One code keeps says paper jam and carriage jam when neither are jammed. I followed all the recommended things to do. I live in Raleigh NC any place to take this or any suggestion.
Read Full Q/A … :
Epson WorkForce 645
Canon mx410 Paper jam message, but no paper jam?!
ANSWER : I have exactly the same problem, no answers 😳
Read Full Q/A … :
Epson WorkForce 645
Paper Jam and carriage jam code when nothing is jammed
ANSWER : Did you try cleaning the encoder strip that runs through the cartridge assy.? Use Window Cleaner on a paper towel. Also, check inside on the right. I’ve seen a lot of times where there is a folded up scrap of paper that stops the carriage from going all the way to the right.
Read Full Q/A … :
Epson WorkForce 645
Error Message "Paper out" when paper loaded
ANSWER : Check your paper tray settings as printer may be looking for paper from the manual feed tray on top of printer.
Read Full Q/A … :
Epson WorkForce 645
Keep getting a paper jam message. There is no jam.
ANSWER : You can quit wondering. Parts are unavailable. I’ve seen posts where people have 3D printed the parts or machined them out of metal.
Read Full Q/A … :
Epson WorkForce 645