HP OfficeJet G85

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

The printer`s default print margins are 3.0 mm (0.118 inch) for the top, right, and left margins, and 12.7 mm (0.50 inch) for the bottom. If you are using the HP ePrint App on your device there is an option for re-sizing where you can `fit to page`, which might help provide the most aesthetic results.
In the Job Settings tree, select Advanced settings, Paper, Layout/Margins. Then use the Select margins drop-down menu to set the margins. Select from: Default, Small, Normal and Extended.
Typical copying speeds range from 7 copies per minute (cpm) using black ink in either draft or normal mode to 0.8 cpm using color ink and best mode. Includes HP CopySmart, HP`s digital copying technology, which provides sharp, crisp color and black and white copies automatically.
Continuous paper:

The minimum left and right margins are 13 mm (0.51 inch) each. The maximum paper width is 254 mm (10.0 inches). The maximum printable width is 203.2 mm (8.0 inches).

1/8″ Margin for Most Documents.
In general, however, a print speed of 12 pages per minute (ppm) is considered good for most home printers. For office printers, a print speed of 20 ppm is typically adequate. However, if you frequently print large documents or photos, you may want a printer with a higher print speed.
Travel speed adjusts how fast the printer`s printhead moves when it`s not extruding filament. Increasing travel speed can save significant amounts of print time, but increasing it too much may lead to ringing or ghosting artifacts or even layer shifting (and thus print failure).
Laser printers are unrivalled in terms of speed when it comes to printing black-and-white text pages. Even in low-cost monochrome laser printers, print speeds of up to 20 pages per minute are possible.
Every printer is different, but general safe margins for each size are: 8.5 x 11: 0.25in on the top, left, and right, and possibly more on the bottom, like 0.5in. A4: 5mm on all sides, or 10mm to be extra safe. The bottom margin may also be bigger on this size.
Both the MLA and APA style guides require 1-inch margins on the top, bottom and both sides of the page. In most cases, when you open Microsoft Word, the margins will already be set to 1-inch.
I would say that the standard margin is 12,7 mm.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

HP laser jet 3015 "Upgrade Error Call HP Support"
ANSWER : rgtr

Read Full Q/A … :

HP OfficeJet G85

HP 26 vs HP 29 cartridge compatibility
ANSWER : Eu decidi fazer um binário opções, o primeiro passo neste trabalho yavlyaetsya formação inicial e os fundamentos .. Put Options and Call Options Trading É por isso que eu escolhi um par de artigos de alguns sites na Internet, se você pode se perguntar vospolzovatsya put-call-options.com/br/what-are-options/binary-options-and-strategies

Read Full Q/A … :

HP OfficeJet G85

HP 4250 13.06.00 Fuser output paper stop !
ANSWER : pick up solenoid

Read Full Q/A … :

HP OfficeJet G85

HP 4250n – blurry text
ANSWER : What is the fuser? And how can it be changed?

Read Full Q/A … :

HP OfficeJet G85

HP 4101MFP Hard Drive Question
ANSWER : To initialize: turn off – Press start and hold down while turning on, release after all three light light, you should see initialize disk hit check, and allow to boot.

Read Full Q/A … :

HP OfficeJet G85

HP 9040 MFP Error code
ANSWER : bonsoir

Read Full Q/A … :

HP OfficeJet G85

HP 4550N formatter board
ANSWER : You can replace it by finding the slot of DIMM, where the existing HP4550N formatter board is installed. More info is available here

Read Full Q/A … :

HP OfficeJet G85

Reseting the ink levels for hp c7280,
ANSWER : I held the # and 6 down long enough to start a complete re-set of the printer But the Black ink level still shows as depleted when it is actually still half full.

Read Full Q/A … :

HP OfficeJet G85