Brother Compactronic I
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
The message “Unable to Print 50” will appear on the display for one of the following reasons: i. A foreign object, such as a paper clip or ripped piece of paper, is stuck in the machine; ii.
Machine Error 7E is an indication of a mechanical malfunction of the Brother machine. Unplugging the machine from the power outlet for approximately 30 seconds and then plugging it back in may temporarily resolve the issue, but the machine will require service.
Brother printer error
The Drum Error is another common error experienced by users of Brother printers. Both the error message “Drum Error” and “Clean Drum Unit” mean that the drum unit of your machine is dirty. The dirt may be caused by dust or by loose toner.
The message “Unable to Print 30” will appear on the display for one of the following reasons: i. A foreign object, such as a paper clip or ripped piece of paper, is stuck in the machine; ii.
This error may be the result of one of the following: The print head carriage is failing to return to its home position to the far right of the unit. Both of the springs located on each side of the carriage is out of place. The cartridge covers may not be locked securely in place.
1. Paper Jams. Paper jams are a common problem for printers, resulting in time-consuming and frustrating delays. It can occur when loose sheets of paper get stuck in the rollers or feeding mechanism of the printer.
If you receive error message “E01” or “E02” on the Artspira app screen, it means that the machine is not connected to the internet. The machine may show a strong connection to the network, but there is a possibility it`s not connected to the internet.
Machine Error 50 is an indication of a mechanical malfunction of the Brother machine. Unplugging the machine from the power outlet for approximately 30 seconds and then plugging it back in may temporarily resolve the issue.
Error 50 is Invalid destination number. Are you trying to send a shortcode?
unable to send sms error code 50 happens when the sms service has been blocked for 24hrs as per government rule. usually this happens after sim card replacement in any operator.
The SMS error code for an invalid destination number is “50.” The network carrier sends out this SMS error code when the destination number entered is not correct, not SMS-enabled or is a landline number. A sender will receive this notification when the message was sent to a wrong phone number or invalid destination.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Brother MFC 7220 "back cover open" error
Just googled this problem and delved into the innards of the machine. Lo and behold, there was a piece of paper stuck there and I have removed it (with difficulty). So it wasn’t “back cover” at all (which I kept on banging shut of course!). Misleading!
Brother HL-1650 Service Call Error E50
Thanks to vikas on Sep 15, 2005 at 9:09am
Brother Intellifax 4750e 77 error
I just received a used fax machine from a school district that recently purchased a new one. Everything is fine except the indicator light is not lit. It runs perfectly, I just can’t read anything on the screen. Also, is there any way I can get a manual other than printing it. There are 156 pages and I will run out of toner or paper, or both. Thank you.
Brother MFC-9840CDW Print Unable 32 Error
That is caused by a sticking solenoid. It’s not that hard to fix, I’ve done a bunch of them. Here is a video that shows how. https://www.youtube.com/watch?v=6Bob34TLrPQ
Error Code 51.1 says Printer Error No Kidding.lol
Sometimes turning off and on will allow you to print a few pages. The error is a beam detect error. The only real fix is to replace the laser scanner unit. Could be a loose connector on the scanner or DC controller from the scanner. That’s unlikely. You could try the only other free fix which is to open the scanner assy. and clean all the mirrors inside. The dust could obstruct the laser beam enough to cause the detect error.
printer error code unable to print 4f
Follow these instructions:
Error Message – Unable to Init. 4F
Access the internal maintenance mode by pressing the Menu/Set button, then press * 2 8 6 4 within 2 seconds. This should put you in the maintenance mode menu. Enter 80, and then scroll down with the arrow down (round) key. You will find an entry listed as purge count. If number is over 6000, enter 2 7 8 3.
Brother J315W – paper misfeed
I have the same problem: whether printing or copying, the paper feeds almost up to the print head and then stops with a paper jam error. Can’t find any bits of paper stuck anywhere. Sure would appreciate some help. DCP-J315W