Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Right-click the My Computer icon on your desktop, and then click Properties. Click the Hardware tab, and then click Device Manager. Click to expand Ports, right-click Printer Port (LPT1), and then click Properties. If have more than one printer port installed on your computer, click LPT2 or LPT3.
LPT (line print terminal) is the usual designation for a parallel port connection to a printer or other device on a personal computer. Most PCs come with one or two LPT connections designated as LPT1 and LPT2. Some systems support a third, LPT3. Whatever the number, LPT1 is the usual default.
Once you see “Device Manager”, click on the icon. With the “Device Manager” open, look for “Ports (COM & LPT)” in the list of different device types. Right click on “ECP Printer Port (LPT1)” and choose “Properties.” Navigate to the “Port Settings” tab and check the box to “Enable legacy Plug and Play detection.”
(Line Print Terminal 1) In a PC, the logical name assigned to parallel port #1. The parallel port, which is no longer found on modern PCs, was typically used for the printer.
Press the Windows key + R, type devmgmt. msc, and press Enter. Check to see if the parallel ports and parallel device is listed under Ports (COM & LPT).
COM ports can be used to connect peripheral devices and LPT port are specifically used for connecting printers.
Click the Start button, point to Settings, and then click Control Panel. Right-click the System icon, and click Open in the menu that appears. Select the Device Manager tab. Select ECP Printer Port under Ports [COM & LPT], then click the Properties button.
LPT is a self-assessed tax charged on the market value of residential properties in the State.
LPT is a parallel port for a printer. Used to be standard on PCs, is now rare. COM (COM1, COM2) is a serial port for connecting telephone modems or a console port (such as a Cisco router).
The LPT port or parallel port is found on the back of the computer and is part of the motherboard. Most of today`s computers are eliminating the parallel port in favor of USB ports.
Simply plug the USB cable from your printer into an available USB port on your PC, and turn the printer on. On the taskbar, select the Search icon, type Printers in the search bar, and then select Printers & scanners from the search results to open the Printers & scanners system setting.
For a printer connected to the computer via USB, the Port should be set to USB Virtual Printer Port (such as USB001, USB002). For a printer connected to the computer via Parallel, the Port should be set to LPT1 (or LPT2, LPT3 if you have more than one Parallel interface port on your computer).
Ensure that the latest BIOS code is installed for your system. This will ensure proper operation of the ports to allow the ports to properly connect to and communicate with a serial or parallel device. Remove any switch boxes, cable extensions, or port sharing equipment between the system and the device.
Every printer contains an IP address that allows it to seamlessly connect to your computer (or other devices) through your Wi-Fi network. Here`s everything you need to know about finding your printer IP address—as well as some information about how printer IP addresses work.
Click on “Wi-Fi network” in the taskbar. Select the network you`re connected to. Click on “Properties.” Scroll down to the bottom of the window — your IP will be shown next to “IPv4 address.”
A standard LPT port will provide speeds of 40Kb/s to 60Kb/s while the faster ECP ports will deliver up to 1.1 Mb/sec or 8.8 Mbps.
Go to the command prompt. Type ipconfig. Then, type netstat to populate a list of all the port numbers.
Press the Windows key + R, type devmgmt. msc, and press Enter. Check to see if the parallel ports and parallel device is listed under Ports (COM & LPT).
Type “Cmd” in the search box. Open “Command Prompt”. Enter the netstat -a command to see your port numbers.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Error Code 51.1 says Printer Error No Kidding.lol
ANSWER : Sometimes turning off and on will allow you to print a few pages. The error is a beam detect error. The only real fix is to replace the laser scanner unit. Could be a loose connector on the scanner or DC controller from the scanner. That’s unlikely. You could try the only other free fix which is to open the scanner assy. and clean all the mirrors inside. The dust could obstruct the laser beam enough to cause the detect error.

Read Full Q/A … :
Unknown Printer

Error Code 52.1M
ANSWER : Magenta laser error. The spinning motor bearings cause the squeal and that slows it down causing the error. You could try opening it and lubricating the motor shift with a drop of synthetic lubricant. Do not use more than a drop.

Read Full Q/A … :
Unknown Printer

Scanner error keeps coming up
ANSWER : I am having the same problem with my Epson Workforce 645

Read Full Q/A … :
Unknown Printer

HP CLJ CP 5225 ERROR 55.0601
ANSWER : my printer cp5225 is giving me error code 55.0601 message which i can’t fix please help

Read Full Q/A … :
Unknown Printer

Error Message 4F on MFC 210C
ANSWER : Basically this kind of error caused by loss of voltage on print head. If this is the case then I suggest to buy a new printer rather than replace print head. Print head might be too costly.

Read Full Q/A … :
Unknown Printer

HP 9040 MFP Error code
ANSWER : bonsoir

Read Full Q/A … :
Unknown Printer

Density Shutter Error
ANSWER : I’ve never worked on one of those printers, but I have never, ever seen 1 valid solution for printer repair on fixya.com I read the replies there when I need a good laugh. Makes me wonder what the “techs” on that forum actually do for a living. It certainly couldn’t be printer repair.

Read Full Q/A … :
Unknown Printer

52.0 SCANNER ERROR
ANSWER : Laser scanner assembly.

Read Full Q/A … :
Unknown Printer