Brother MFC 9700

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

What is the drum unit? The drum unit transfers the toner to the paper. The laser printer puts the toner on the roller called “The photosensitive drum” inside the drum unit, and then prints letters and images by fixing toner to the paper by heat and pressure.
The Brother machine will display a `Replace Drum` or `Drum Stop` message when the machine has printed approximately 15,000 pages. The drums should be replaced as a set in order to maintain print quality. Unlike the toner cartridges, the drum change is not automatically detected by the machine when they are replaced.
A drum unit is a green metal cylinder or tube that carries a static electrical charge that attracts the toner powder from the toner cartridge and applies it to the paper as it passes through the printer. Therefore, you will always find that the drum unit is located very close to or even attached to the toner cartridge.
What`s the difference between a drum unit and toner cartridge? The toner cartridge is the container that holds the toner powder. The drum unit is an electrically charged cylinder that fuses that toner powder onto paper to create text and images. Both of these components are essential for producing a print.
15,000 pages (1 page/job). There are many factors that determine the actual drum life, such as the temperature, humidity, type of paper, type of toner used and so on. Under ideal conditions, the average drum life is estimated at approximately 15,000 pages.
The biggest tell is misprinted pages. If you have a new Brother toner, and the printer still puts out pages with obvious streaking on them – it`s time for a drum unit replacement. Don`t let bad printouts make you seem unprofessional – replace or fix your Brother printer drum today!
Many people think their toner drum has gone bad and pay hundreds of dollars to fix or replace it. In reality, it`s just time for a good cleaning. You`ll know the drum is dirty if you notice that the print quality has become blurry and features blank spots or oddly-colored spots despite having full toner cartridges.
The standard drum units can produce around 12,000 pages before needing to be replaced. Not every drum unit will adhere to the same guideline, so you should be aware of its total page yield before inserting it into your printer.
You should replace it when your image quality declines and does not improve even after changing your toner. Or simply replace your drum when your printer notifies you to do so. When the replace drum light or message comes on, your printer might stop working without much notice.
These companies, including HP, Epson, and Brother, sell their printers at a loss and recoup their investment in ink and toner sales. “That`s why original brand cartridges are so expensive,” he says. These name-brand (also known as original equipment manufacturer or OEM) cartridges aren`t your only options, though.
A typical toner cartridge will produce anywhere between 2,500 and 4,000 pages, based on a coverage of 5% (roughly third of a page of double-spaced text). Dense pages filled with small font text or graphics will dramatically reduce this output and you may only get up to 1,000 pages per cartridge.
Where Brother Benefits. Brother printers tend to be a little more work but make up for it with long-run savings. Toner replacements for Brother models are typically cheaper than its competitors, including HP, but part of this comes from toner and drum replacements that are more complex.
The most obvious sign that you have to finally replace some of your drums, drum heads, or even the entire drum kit, is that it`s simply too old and damaged, and the beats no longer sound like they used to.
They recommend always changing your drum heads before you start recording. Otherwise, if you`re just practicing and playing normally, you should find yourself replacing heads every six months or so. Six months isn`t a hard rule, and for some could be a risky amount of time to wait.
Drum heads wear out!

Drummers who practice a lot should probably change heads once every six months. Drummers who own their own drums can probably change the heads without any problem, but if it is the first time, it might be a good idea to have someone at the drum shop, or an experienced drummer, teach you.

The average lifespan of a printer is around 3-5 years. With proper upkeep and maintenance, some printers can last longer, but eventually your machine will need an upgrade.
The most obvious is most common on laser color printers and can be detected by a flashing message on the printer display screen. Other signs of a bad printer drum include printing blank pages, printing gray pages and strange sounds coming from the printer as it prints.
Drum Printer ADVANTAGES:-

Low cost than non impact printer. Can make carbon copy of print out. Low maintenance cost. Faster than other impact printer.

You can make prints lighter or darker by adjusting the print density setting in the printer driver`s dialog box or the RJ Utility. -5 is the lightest, and +5 is the darkest. Make sure you are using recommended Brother Genuine Thermal paper.
Press [Settings]>[Maintenance]>[Print Setting Options]. Select this option according to whether you are using 1-sided or 2-sided printing if you have problems with smudged printouts or paper jams. Select this option if you use a type of plain paper on which ink dries slowly. Follow the LCD menus.
To avoid print quality problems, DO NOT touch the surface of the drum unit, only the wheel on the end.
But the replacement of a drum unit is vital to laser printers` health. A degraded drum unit can cause streaks, smudges, and blank spots on your printed page even if you just inserted a new printer toner. While a broken drum unit won`t break your printer, it will just fail to stop printing at a certain point.
But the replacement of a drum unit is vital to laser printers` health. A degraded drum unit can cause streaks, smudges, and blank spots on your printed page even if you just inserted a new printer toner. While a broken drum unit won`t break your printer, it will just fail to stop printing at a certain point.
You`ll know the drum is dirty if you notice that the print quality has become blurry and features blank spots or oddly-colored spots despite having full toner cartridges. Horizontal lines across the printout when the paper passes over a dirty area are another sign that it`s time for some maintenance.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

BROTHER MFC 490CW/ MFC 210C
ANSWER : The industry says that at least once a month you should print something, even a test print page to avoid the ink drying up in the print heads. Most printers including Brother will turn themselves on occasionally to clean themselves. I do not recommend refilling your ink cartridges yourself. You can buy ‘non-OEM compatible refilled’ ink cartridges for you printers very cheaply but not all that make/sell these are of the same quality. So if this is of interest to you then you need to shop around until you find a good & reputable compatible non-OEM ink seller.

Read Full Q/A … :

Brother MFC 9700

Brother MFC-5440CN 'Unable to Clean'
ANSWER : PRINTER MODEL MFC-J410W: PAPER JAM CLEARED, STILL WON’T PRINT–“UNABLE TO CLEAN 50” IS DISPLAYED. TRIED BOTH PURGE AND FLUSH–NEITHER WORKED. ANY OTHER IDEAS?

Read Full Q/A … :

Brother MFC 9700

brother mfc 7420 toner life end message
ANSWER : Thanks a million. I tried all the other tricks and nothing worked. This worked perfectly on my MFC 8810. I wich I would have known this a long time ago

Read Full Q/A … :

Brother MFC 9700

brother mfc 9440 cn
ANSWER : I was able to fix the same problem with scotch tape on the selinord with removing it

Read Full Q/A … :

Brother MFC 9700

MFC 8440 Brother 5 in 1
ANSWER : I have the same problem except both left and right hinges are broke. I’ve removed the and it does work but I’d still like to order the parts and replace them. Where would I find the parts for ordering.

Read Full Q/A … :

Brother MFC 9700

Brother MFC-J6510DW extra paper tray.
ANSWER : There clearly was a similar problem couldn’t enter in to a ditch of benefit drawing up a strategy. A pal gave this http://put-call-options.com site to select an appropriate technique and I have chosen for themselves the optimum and successful naybolee. I hope I served you with your problem. Thanks for attention)))

Read Full Q/A … :

Brother MFC 9700

Brother MFC 8220
ANSWER : This problem is normally caused by the fuser. There’s a brown driver gear who frequently broke and you’ll be obliged to replce it to take care of the problem.

Read Full Q/A … :

Brother MFC 9700

Brother MFC-9840CDW Print Unable 32 Error
ANSWER : That is caused by a sticking solenoid. It’s not that hard to fix, I’ve done a bunch of them. Here is a video that shows how. https://www.youtube.com/watch?v=6Bob34TLrPQ

Read Full Q/A … :

Brother MFC 9700