Epson Stylus C86

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Method 1 – Bypassng Ink Cartridge on Epson Printer

After opening the lid, hold the ink button down. When you find the ink holer is moving to its position, then open the cartridge`s lid which is having no ink. Close it again without removing the cartridge. Close the lid and start to print.

How to check the manufacture date of your Epson inkjet printer: Turn the printer upside down and look for 4 little dials. They resemble clocks, imprinted in the plastic casing. The clocks show the year, month and day of manufacture.
Find the Cartridge Reset Button.

Some Epson cartridges such as Epson 78 ink has a reset button for refillable purposes. Turn the ink cartridge to where the microchip can be found. Using the end of a paper clip, press the reset button that can be located above the metal contacts, right in the center.

If your printer is not detecting the cartridges, there might be the following possible reasons: The cartridge chip is dirty or damaged. They are not compatible with your printer. They are not installed properly.
Press and hold down the Cancel button for 3 seconds. When the message to reset the printer to default settings appears, press OK to reset the print settings. Note: This reset does not affect LCD contrast, Print Confirmation, or PictureMate Print Wizard settings.
Ink cartridge lovers across the globe want to bypass HP Instant Ink (although technically bypassing HP Instant Ink is not possible, you can only cancel the program). Well, read on!
From Windows applications

Open the File menu and choose Print or Print Setup. Click Printer, Setup, Options, or Properties. (Depending on your application, you may need to click a combination of these buttons.) The printer software window appears.

While the printer is off, press and hold power, down arrow, left arrow and cancel buttons at the same time, until your ROM menu appears on your printer`s display. Download and run the older version of the firmware installation package on your computer.
Try connecting the product to your router, access point, switch, or hub with another Ethernet cable. Try printing from another computer on the network to see if the problem persists. If network communication was interrupted while starting Epson Scan, exit Epson Scan, and restart it after a few seconds.
If your printer is turned on, disconnect the power cord from the printer. Keep the power plug unplugged for 60 seconds, reconnect the power cord to the wall, and turn on the printer. If the error persists, remove the cartridge from the printer, clean the cartridge contacts with a cloth, and reinstall the cartridges.
Access the print settings in your print application. Click the Main tab. Select Plain Paper/Bright White Paper or Envelope as the paper type setting. Select the Black/Grayscale checkbox.
Yes, you can reset the print settings to their original, default values. Press and hold down the Cancel button for 3 seconds. When the message to reset the printer to default settings appears, press OK to reset the print settings.
Your Epson printer may have failed to recognize the new ink cartridge, or its ink level system has read it as empty. For numerous Epson printer models, there`s a way to bypass this built-in ink checking system through a quick cartridge reset. Raise the printer`s top cover and then hold the Ink button.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Epson printer can't recognize Epson ink cartridge
ANSWER : Hi, my name is Jim.

Read Full Q/A … :

Epson Stylus C86

Epson 7880 ink pump sucking ink
ANSWER : Not ink pump, but air pump, to put the ink feed under pressure.

Read Full Q/A … :

Epson Stylus C86

Epson Stylus PX810FW
ANSWER : You could have air in the tubing/print head.

Read Full Q/A … :

Epson Stylus C86

Epson R3000 Inkjets Clogged
ANSWER : If you haven’t yet destroyed your printer or turned it into a paper weight, check this out:

Read Full Q/A … :

Epson Stylus C86

Epson Artisan 835 print head cleaning question
ANSWER : I had the same problem. After reading the comments, I tried Liquid Wrench spray. 1st try got about sixty percent improvement. Tried again this time I let it set for about 10 min then did a head cleaning. Completely solved the problem. I am a little concerned about its use on plastic. So far so good.

Read Full Q/A … :

Epson Stylus C86

Epson Artisan 700 Ink Reset — Any Other Way
ANSWER : I really need the utility but How do I send you a message? I dont see your address

Read Full Q/A … :

Epson Stylus C86

Epson, sudden cannot recognise cartridges error
ANSWER : Hi, I have exactly the same problem than you, I’ve been trying to solve it since 6 months. I have an Artisan PX730 WD, and the genuine cartridge can’t be recognized all together. And status monitor indicates same thing than you.

Read Full Q/A … :

Epson Stylus C86

Epson XP600 Paper Jam
ANSWER : hi Russ .did u find solution for ur problem?? i have the same problem ,how did u fix ur printer ..will be glad if u write me on email [email protected]

Read Full Q/A … :

Epson Stylus C86