Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

On the new formatter PCA, install the memory drive. For models equipped with a hard disk drive (HDD), slide the drive into its holder and connect it to the formatter.
A formatter board is a device whose job is to translate signal from a printer device. It receives print data from the computer system and processes it to produce an image and pass it on to the Engine Control System.
Installing a new formatter and a new DC controller

Turn the product off. Remove the formatter and cage, and then replace it with the replacement formatter and cage. Turn the product on and then wait for five minutes after the product reaches the Ready state.

The Epson PLQ 20 Formatter Board which is also known as Epson PLQ 20 Main Logic Board or Epson PLQ 20 Logic Board is the most important part of the printer that converts print data into electric voltages to be used by the printer engine result in print.
The moral of all this is: do not swap formatters and dc controllers between machines for troubleshooting purposes unless you must, and then be aware that it may cause identity problems. And do not remove both boards at the same time.
From the Home screen on the printer control panel, select Reports. Select Configuration/Status Pages. Select Configuration Page. Select Print to print the configuration and Jetdirect pages.
Linters help you catch potential bugs and issues before they become serious problems, and encourage you to write more maintainable and readable code. Code formatters help you enforce a consistent code style and format, saving time and reducing the chances of human error.
Formatter Number: The barcode label on the formatter provides the formatter number and is useful when replacing the formatter. SCB: Indicates the Scanner Control Board of the printer and lists the scanner version.
A formatter will design the interior of your book and typeset the text so it`s ready for printing and uploading to ebook marketplaces. You can format it yourself, or if you want to skip the headache, you can hire a designer to do it for you.
In Control Panel, go to Hardware and Sound. Next, click on Devices and Printers. Under the Printers section, locate and select the printer device you want to remove. Right-click on the printer and select Remove Device.
The high-voltage power supply (HVPS) provides the high voltages used during printing. This component converts house AC current (120V, and 60Hz) into higher voltages that the printer can be used to energize both the charging corona and the transfer corona.
Select the Start button, then select Settings > Devices > Printers & scanners . Under Printers & scanners, look for your printer. If you see your printer listed, you`ll know it`s installed.
Right Click on a printer and select Properties. Click the “Separator Page” button. Enter the path and file name of the separator page file and click OK. Click OK again to exit the Printer Setup.
Apparently, a bad toner cartridge can cause error 59.00. 30, but replacing the toner combined with: removing the fuser and putting some oil on the axis at each end (and turning the gear several revolutions), cleaning the paper path and rollers solved the problem.
note: For the M553 models, the base memory is expandable to 2 GB by adding a DIMM memory module.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

LCD Screen and Digitizer Assembly Replacement for Samsung Galaxy Note 5
ANSWER : Please do respond me, I need LCD Screen for my Samsung Galaxy Note 5 Gold

Read Full Q/A … :
Unknown Printer

Waste Toner Cartridge is empty but printer is still telling me to replace it
ANSWER : All of the ones I’ve seen are optical. Light shines through a transparent section of the waste box onto a photocell. If toner builds up past that area, it gives a warning to replace it. Possibly toner dust has gotten on the photocell.

Read Full Q/A … :
Unknown Printer

Please help! Replace toner message keeps coming up! Brother DCM-1510
ANSWER : It’s a laser printer, there is no ink. You are going about it the wrong way. Watch this video. You can just skip the first part and go to 1:30 into the video. http://www.dailymotion.com/video/x1yakq1_how-to-refill-and-reset-brother-hl-1110-hl-1112-hl-1112a-dcp-1510-dcp-1512e-mfc-1810_tech

Read Full Q/A … :
Unknown Printer

Replace touchpad
ANSWER : I doubt you can find them. Surprised you found a display panel. Probably a used one. The contacts on ribbon cables can peel back if not properly inserted. You can flatten them out and gently push them into the connector. Always make sure they are seated all the way.

Read Full Q/A … :
Unknown Printer

Toner cartridge full, printer displays: "empty needs replacing"
ANSWER : I once went to a customer who had a similar issue. They had installed new cartridges and judging from the box, they looked OEM. Strange thing was they felt empty when lifted and they were missing the chip on the outside that tells the printer it is installed and keeps track of how many copies were printed with that cartridge. The printer has no other way of knowing if the cartridge is full or empty.

Read Full Q/A … :
Unknown Printer

replace with new imaging unit error
ANSWER : samsung clp 365w firmware

Read Full Q/A … :
Unknown Printer

replace imaging drug
ANSWER : Open the top lid. Grab the handle in the middle of the drum and pull up.

Read Full Q/A … :
Unknown Printer

HP 4550N formatter board
ANSWER : You can replace it by finding the slot of DIMM, where the existing HP4550N formatter board is installed. More info is available here

Read Full Q/A … :
Unknown Printer