Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Here are the most common causes of a printer printing faded text or images: Low ink or toner levels. Toner sticking to the fuser roller or problems with the transfer roller. Low ink or toner density settings.
The printer could be dirty. Solution: Arrange to have your printer cleaned. The toner cartridge may be nearly empty. Solution: Replace the toner cartridge.
A common cause of faded, faint printouts from your inkjet printer is dried ink particles causing a blockage in your printer. The printheads on an ink cartridge can be become blocked if the printer is not used for a period of time, so it is recommended to print a few pages each month to maintain the print quality.
Turn the product on while you press and hold the Resume button for 10-20 seconds. The Attention light turns on. Release the Resume button. The Attention and Ready lights cycle while the product restores factory defaults.
Unfortunately, there is no way to restore faded ink to its original state. Some chemicals are advertised to darken original inks, but they are often damaging to paper and conservators do not recommend them.
Usually a quick paper setting adjustment will clear up a ghosting issue right away. Run a cleaning – Most printers have a cleaning function built into the machine. Run this a couple of times to attempt to clear up the printing issue. Inspect the drum – Sometimes excess toner powder can stick to the drum.
Paper Jams

This is a common laser printer problem. Primary causes include grime, dust, worn rollers, or incorrect paper weight. The most basic way to prevent paper jams is simply through regular cleaning of your printer. Also, replace parts as needed.

Printer Faults – Faded One Side of a Print. Fading at a margin generally suggests: an imbalance of the toner, all of it is unshiftably at one side of a cartridge. The toner agitators or stirrers should move the problem but don`t invariably succeed.
Ghost prints happen when the drum or fuser unit within your printer become faulty. Because a fault with this element won`t heat the particles of the toner to a high enough temperature, the marks being made on the paper are much lighter in colour and appear more faded than typical documents.
Go to Settings menu | Printer Maintenance | Restore . Press Restore Factory Defaults. Follow on-screen instructions.
Recommended action. Turn the printer off, wait 15 seconds and turn the printer back on (using the power switch located on the back of the printer). The error code should not appear again.
If the display panel on your HP LaserJet reads “Perform Printer Maintenance”, “Perform User Maintenance”, “Maintenance Kit Low”, “Maintenance Kit Very Low”, or anything along those lines it means your printer needs a preventative maintenance kit, which includes a fuser and various rollers.
A maintenance kit is a set of replacement parts for a printer. Each printer has a preset maintenance interval, which occurs after a certain amount of pages are printed. The maintenance interval lets the user know that it`s time to install the maintenance kit so that the parts within the printer do not get overused.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

41.3 unexpected paper size on a 4050
ANSWER : I have 3 white plastic levers towards the back of it. The top is set in the next 2 are out. Top one is loose. I have a two tray so I switched 2 to 1, and 1 to 2. still get the 41.3 Help

Read Full Q/A … :
Unknown Printer

HP 4050 Error 13.1 & 13.20
ANSWER : I tried the fix you recommended but it still would not fix.

Read Full Q/A … :
Unknown Printer

when printing front and back, the front will print well but the back will fade
ANSWER : It happens because second side voltage is much higher and the board breaks. Are you getting this issue in auto duplex only, or same error you are getting when you print second side manually?

Read Full Q/A … :
Unknown Printer

ERROR on HP LJ 4525
ANSWER : Print a Configuration page. That will tell you what size paper Tray 2 thinks it has in it. If it doesn’t have plain letter on the page, then it will ask to print from Tray 1.

Read Full Q/A … :
Unknown Printer

Paper tray jammed
ANSWER : Check from the back of printer to see if some paper lodged at top of tray and has jammed it up – you may be able to work it out from the back side. If not you may have to partially disassemble the printer and/or tray to get the tray out.

Read Full Q/A … :
Unknown Printer

LJ 4200 Downld file now (Download file now)
ANSWER : just thanks this password generator that can allow you hack snapchat account online without any error at all.

Read Full Q/A … :
Unknown Printer

Fat Black ink fade out
ANSWER : Dear friend

Read Full Q/A … :
Unknown Printer

LJ 4250N Tray 2 Clearing Paper Path 41.3 Error
ANSWER : i saw sAme problem in my client printer hp lj 4250 . its toner problem . when i am the toner change then printer is 100% ok.

Read Full Q/A … :
Unknown Printer