LJ 2100 light, rapid ticking — not cartridge

Here are the most common causes of a printer printing faded text or images: Low ink or toner levels. Toner sticking to the fuser roller or problems with the transfer roller. Low ink or toner density settings.

An E0 error indicates an unusable cartridge. This condition occurs when at least one ink cartridge needs attention, is faulty, incorrect, missing, damaged, or incompatible. Reseat both ink cartridges, clean the ink cartridge contacts, restart the printer, and replace one or both ink cartridges if necessary.

Check the ink levels

Sometimes, the printer may not print black ink because it is low or empty. You can check the ink levels on the printer`s display, or by using the software that came with your printer. If the ink level is low, replace the cartridge or refill it according to the manufacturer`s instructions.

If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.

If your printer is turned on, disconnect the power cord from the printer. Keep the power plug unplugged for 60 seconds, reconnect the power cord to the wall, and turn on the printer. If the error persists, remove the cartridge from the printer, clean the cartridge contacts with a cloth, and reinstall the cartridges.

Go to your computer and click “Print” from the file that you wanted to print. Click on “Properties” and then the “Color” tab next. Select the “Print in grayscale” option by clicking on its checkbox. You can now start printing in black and white.

A common cause of faded, faint printouts from your inkjet printer is dried ink particles causing a blockage in your printer. The printheads on an ink cartridge can be become blocked if the printer is not used for a period of time, so it is recommended to print a few pages each month to maintain the print quality.

When color ink is expended and black ink still remains, you can continue printing for a short time using only black ink. However, you should replace the expended ink cartridge(s) as soon as possible.

Press the button on the chip-reset tool for several seconds until the LED light on the device goes off. Then, unlock the reset tool from the cartridge. Use the resetter with other cartridges and install them back into the corresponding slots in your printer. Voila!

Just above the circuit board on most printer cartridges, you`ll find a small button. You`ve seen these tiny buttons before on cell phones, phone chargers, etc. This is your reset button, and the only way to get in there is either with a paper clip or the tip of a pen (which will leave a tiny ink smudge on the button).

If your HP printer not printing black ink correctly, here`s what you should do. Using non-genuine ink cartridges. Printheads that have become clogged. Ink cartridges that are defective or empty.

Test Your Toner Density First

To ensure this isn`t the issue, remove the toner cartridge, shake it a few times, and insert it back into the printer. If the next page you print is darker, that means that your printer is low on toner density. Next, try replacing a light printing toner cartridge with a fresh one.

Faint, streaky or spotty prints are all common signs of a clog but a simple cleaning can usually get your HP ink cartridges working again. Printheads clog due to infrequent cartridge use. If you regularly go a few weeks without printing, your cartridges will eventually dry out and need to be replaced.