Epson Stylus CX6400
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
The Cause of Clogs
Printheads clog because nozzles get blocked by either air or ink. Clogs usually happen when: You keep printing with depleted ink cartridges. Using empty ink cartridges can result in air bubbles that can clog your cartridge and/or printhead.
If your document has smudges, your Epson printer may be unclean. Dirt, dust, or toner can be the cause for smudges on your paper that are collected on the rollers of your printer as it passes through the paper. Cleaning the paper rollers guide from Epson will teach you how to do it.
The ink levels may be low and you may need to refill the ink. Visually check the ink levels. Also make sure you filled the tanks with the correct colors of ink. After you print, the colors in your printout need time to set as the ink dries.
A printer printing lines on the page are normally caused by a blocked, dirty, or damaged print head. Blocked ink cartridge nozzles, or not removing protective seals correctly when you installed a new ink cartridge can also cause missing lines of print.
If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
Trick the printer.
Low ink doesn`t mean no ink. Remove the cartridge, wipe it with a lint-free cloth and reinsert it. This process can fool your printer into “thinking” you`ve put in a new cartridge and may help it eke out a few more pages.
This happens when the rollers or the transfer belt inside the printer get dirty or covered in excess dirt, ink or toner powder, and as the paper is moved through the printer the `tracks` are being left on the page. This is normally the case when the tracks on the page are located at either end.
Smears and smudges on the paper can be caused by dirt, dust, or toner accumulated on the rollers or transfer belt as it passes through the paper. Cleaning your printer, particularly the rollers, is one of the options for removing black markings from paper.
If your printouts are blurry or smeared, try these solutions: Make sure your paper is not damp, curled, old, or loaded incorrectly in your product. Use a support sheet with special paper, or load special paper one sheet at a time. Make sure your paper meets the specifications for your product.
Streaks on your print jobs are a result of your copier glass being dirty. “Dirt” is created by fingerprints, dust, and other forms collected through usage. Often this will be detected by your device before streaks begin to appear, and a display will read that the glass needs to be cleaned.
Partial prints are a common issue with printers and there are several main reasons it can occur: Problem with the print spooler (on Windows PCs) Overload of the GPU on later model Macs. Dodgy USB cord.
This error message is usually the result of a cartridge that is not firmly seated in its designated slot. To troubleshoot the problem, begin by completely removing the cartridge from its port. Reinstall the cartridge by positioning it so that it snaps into place and is securely fastened in its slot.
There are chips inside the original cartridges to record how many pages were printed and they cannot be reset. As a result the printer reads the chips and tells you that the cartridges are empty, even though they are not. This is why you are getting the “ink low” message even though the ink tank is at full capacity.
There are four primary causes for horizontal banding on prints from inkjet printers, (1) nozzle clogs, (2) mis-aligned print heads, (3) low quality print settings (4) incorrect paper thickness settings. Below we will describe each of these causes for horizontal banding as well as ways to try and fix them.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
evenly spaced horizontal lines on hp laserjet III printout
ANSWER : The lines would be a toner cartridge problem. Which paper tray? The MF tray or the optional paper cassette?
Read Full Q/A … :
Epson Stylus CX6400
Black line on printed copy
ANSWER : Have absolutely no idea what kind of machine you have so here’s the generic answer. Big copy glass, little copy glass to the left of it. Take window cleaner, put it on paper towel, clean little glass.
Read Full Q/A … :
Epson Stylus CX6400
Reset ink absorber full
ANSWER : Free download of resetter here http://www.k58n.com/3ammresetter/canonresetter/410.html
Read Full Q/A … :
Epson Stylus CX6400
ink pad full error
ANSWER : You need a reset utility to do it. This one appears to be free. http://www.wic.support/?page_id=134
Read Full Q/A … :
Epson Stylus CX6400
Toner cartridge full, printer displays: "empty needs replacing"
ANSWER : I once went to a customer who had a similar issue. They had installed new cartridges and judging from the box, they looked OEM. Strange thing was they felt empty when lifted and they were missing the chip on the outside that tells the printer it is installed and keeps track of how many copies were printed with that cartridge. The printer has no other way of knowing if the cartridge is full or empty.
Read Full Q/A … :
Epson Stylus CX6400
vertical lines
ANSWER : In binary options trading depends directly on simply how much you know the strategies and what broker you will work! I for myself leafing through plenty of techniques but the very best techniques was included with the journal http://options24.net recommend to use. Broblemy with brokers is not unusual, and they need to take established only. It absolutely was there that collected tested. Thank you for your attention, I really hope to greatly help in your problem)))
Read Full Q/A … :
Epson Stylus CX6400
Full Ink Tank in Canon Pixma ip4000
ANSWER : It had been exactly the same subject, could not find an appropriate broker and process for earnings finally had to rummage through the Web, and there I came across this page http://optioninvest.org .Possibly you’ll find there is a therapy to your condition, thanks for the fascination!))
Read Full Q/A … :
Epson Stylus CX6400
black smudge lines
ANSWER : Not knowing if the drum is OEM or remanufactured or if it is way expired, only thing I can suggest is looking at it. Take the toner out and turn it manually with your thumbs on the gear. The drum should be clean all the way around.
Read Full Q/A … :
Epson Stylus CX6400