Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

There are four primary causes for horizontal banding on prints from inkjet printers, (1) nozzle clogs, (2) mis-aligned print heads, (3) low quality print settings (4) incorrect paper thickness settings. Below we will describe each of these causes for horizontal banding as well as ways to try and fix them.
If you notice white or dark lines in your prints (also called banding), try these solutions before you reprint: Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary. Make sure the paper type setting matches the type of paper you loaded.
If your printer is spitting out pages full of strange characters, symbols, or strange formatting, your inkjet printer drivers may be outdated, incompatible with your operating system or corrupt. Drivers are important to the proper function of your inkjet printer and it is best to check for updates regularly.
A printer printing lines on the page are normally caused by a blocked, dirty, or damaged print head. Blocked ink cartridge nozzles, or not removing protective seals correctly when you installed a new ink cartridge can also cause missing lines of print.
When your printer leaves black lines, the lines indicate that there are excess toner powders on the rollers or transfer belt within the printer. As the paper is moved along by the rollers and transfer belt, any excess powder left on them can result in lines being left on the paper.
The band-shaped “stripes” are called “horizontal bands” or “banding.” Horizontal bands are caused by the subtle changes in the movement distance that occur when feeding the media depending on the media`s thickness. We recommend making corrections to match the media you are using.
If bands affect most of the colors, the printheads could be misaligned. This is likely if you have not aligned the printheads for a long time, or if there has been a substrate jam. Align the printheads if necessary. You can check whether it is necessary by printing the printhead alignment status plot.
Preview your settings page

After you upload your app, your SettingsView renders on the app settings page in the Dashboard. To see it live, go to https://dashboard.stripe.com/settings/apps/YOUR_APPLICATION_ID and replace YOUR_APPLICATION_ID with the ID you specified when creating your app.

Usually a quick paper setting adjustment will clear up a ghosting issue right away. Run a cleaning – Most printers have a cleaning function built into the machine. Run this a couple of times to attempt to clear up the printing issue. Inspect the drum – Sometimes excess toner powder can stick to the drum.
a written or printed symbol (as for punctuation) character, grapheme, graphic symbol. a written symbol that is used to represent speech. phonogram. any written symbol standing for a sound or syllable or morpheme or word.
There are numerous possible causes for a printer that`s randomly producing blanks. The most common ones are empty ink cartridges, improper cartridge installation, and congested nozzles. Driver and software issues can sometimes cause this problem as well.
You`ll know the drum is dirty if you notice that the print quality has become blurry and features blank spots or oddly-colored spots despite having full toner cartridges. Horizontal lines across the printout when the paper passes over a dirty area are another sign that it`s time for some maintenance.
A horizontal line is a straight line that goes from left to right or right to left. In coordinate geometry, a line is said to be horizontal if two points on the line have the same Y- coordinate points. It comes from the term “horizon”. It means that the horizontal lines are always parallel to the horizon or the x-axis.
Banding happens when you do not have enough information in your file. Or you push the edits to an extreme. Avoid banding by making a well-exposed photograph and saving it as an uncompressed RAW file. To fix color banding, make subtle edits and limit how much you compress the photo when exporting as a JPEG.
Banding refers to the visible change from one color to another instead of a smooth, fading gradient. You`re most likely to see color banding in gradient backgrounds you create for your renderings or in photographs, natural gradients like skies are prime for color banding.
The overlapping occurs when a text field is not wide enough for the text it contains, causing the text to automatically scroll below the first word. The second word is invisible on the electronic copy, but is visible when printed. To remedy this, you can expand the text field by dragging the handles on the field.
You can view the status of a reserve on your Stripe account from your Dashboard by navigating to your Balance, and then to the Reserve pane at the bottom of the page. Here, you can see the net reserve balance and estimated future payouts, which includes the reserve adjustments that were created for each transaction.
Ghosting is usually considered the presence of a faint image of a design in solid printing areas that is not intended to receive that portion of the image. This print defect is always in the machine direction and usually is a repeated pattern.
Some of the most common printer problems that most of us have experienced include paper jamming, slow printing, uneven printing, and wrong colour output. If you use your printer frequently, we know how annoying it can be to have persisting problems with the printer.
If the paper is too thick, glossy or not designed for laser printing, ghosting will most likely occur. Dust and debris inside the printer can also cause ghosting as too much dirt can interfere with the drum units, transfer units and fuser units.
Double printing can occur for several possible reasons including an improperly seated ink tank, a misaligned print head, and a dirty encoder stip. Select one of the links below to get detailed instructions to address the issue. Check that all ink tanks are seated properly. Refer to Replace an ink tank.
Definition and Usage. The print() function prints the specified message to the screen, or other standard output device. The message can be a string, or any other object, the object will be converted into a string before written to the screen.
The term type is used generally to mean letters and other characters assembled into pages for printing or other means of reproduction. Typography refers to the rules and conventions that govern the assembling—or composition—of type into aesthetically appealing and legible pages.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

blue line on printing
ANSWER : Replace the cyan toner cartridge.

Read Full Q/A … :
Unknown Printer

Black line printing in the middle of the page from top to bottom
ANSWER : Take out the toner cartridge and look at the drum. If you see the line, replace the cartridge. If you don’t, then you need to replace the fuser assembly.

Read Full Q/A … :
Unknown Printer

Prints blank pages, won't print from computer
ANSWER : Don’t know why you replaced the fuser, but assuming you had print before, then it must have been something you did during the procedure. Only thing I can suggest is to recheck your work. Just because you reinstalled a connector doesn’t mean that it is seated firmly enough to work. Any flat ribbon connectors that you removed and reinstalled, check to see that the contacts are all flat and not peeled back.

Read Full Q/A … :
Unknown Printer

smudge line across the page 3/4 way down
ANSWER : Only 2 things can cause it, the toner or the fuser. To determine which, you do a half-stop test. To do so, put a sheet of paper in the manual feed tray. Then send a print job while you watch the page. You want to open the lid about the same time that 3/4 of the page has just passed by the toner cartridge. Might take a few tries. This will stop the area with the problem after it passes the toner cartridge, but before it hits the fuser. You look at the paper and if you see the defect, then it’s caused by the toner cartridge. If not, then it is being put on by the fuser. It seems a bit strange to me because normally a defect like that will occur 3 times per page, which is about the circumference of the toner drum or fuser sleeve.

Read Full Q/A … :
Unknown Printer

vertical lines in the print
ANSWER : Looks like a bad wiper blade in the toner cartridge. They are rubber and with age. Their function is to clean off residue toner on the drum, similar to a windshield wiper blade cleaning off rain drops.

Read Full Q/A … :
Unknown Printer

incomplete printing of page
ANSWER : the printer for above mentioned problem is an Epson; product name = WF-254

Read Full Q/A … :
Unknown Printer

Black line on printed copy
ANSWER : Have absolutely no idea what kind of machine you have so here’s the generic answer. Big copy glass, little copy glass to the left of it. Take window cleaner, put it on paper towel, clean little glass.

Read Full Q/A … :
Unknown Printer

when printing front and back, the front will print well but the back will fade
ANSWER : It happens because second side voltage is much higher and the board breaks. Are you getting this issue in auto duplex only, or same error you are getting when you print second side manually?

Read Full Q/A … :
Unknown Printer