Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Ways to check if Black Only is enabled

Navigate to Settings > Print > Quality > Print Mode and check whether it is set to “Black and White” then change it to “Color”. Navigate to Settings > Device > Maintenance > Configuration Menu > Print Configuration > Black Only Mode. Make sure this option is unchecked.

First, check your printer settings on the file or picture your trying to print. If your page is setup to print in “grayscale” it will only print in black and white. Change the setting to “default” so it will print in color. If your settings look good from the start, the cartridge may just need to be primed.
Check Cables and Printer USB Ports

Check all cable connections (including the power cord) on the printer side. If the printer does have power and you`ve properly connected the communication cable, but the printer is still not recognized, try switching to a different USB port on the PC.

It is a simple process to activate the unsupported Lexmark cartridge override: Hold down the green button* and the cancel (X) button simultaneously. Upon activating the override, the error message will go away and the printer will do a semi-reboot.
At the Windows Manage your device screen, click Printer properties. Click Preferences. From the Color Mode dropdown, choose either Color or Black and White. Click OK to save.
Check the ink levels

Sometimes, the printer may not print black ink because it is low or empty. You can check the ink levels on the printer`s display, or by using the software that came with your printer. If the ink level is low, replace the cartridge or refill it according to the manufacturer`s instructions.

Open the start menu and select Control Panel > Administrative Tools > and choose the Services icon. Locate the Print Spooler service and right-click. Then select the option to “Stop” the service.
Usually a quick paper setting adjustment will clear up a ghosting issue right away. Run a cleaning – Most printers have a cleaning function built into the machine. Run this a couple of times to attempt to clear up the printing issue. Inspect the drum – Sometimes excess toner powder can stick to the drum.
Just above the circuit board on most printer cartridges, you`ll find a small button. You`ve seen these tiny buttons before on cell phones, phone chargers, etc. This is your reset button, and the only way to get in there is either with a paper clip or the tip of a pen (which will leave a tiny ink smudge on the button).
Select Start > Settings . Go to Devices > Printers & scanners > select a printer > Manage.
RGB is used in electronic devices, like computer monitors, while printing uses CMYK. When RGB is converted to CMYK, colors can look muted. Designers were often disappointed when their printed piece looked different than what they had been seeing on screen.
Kindly go to Start > Settings > Update and Security > Troubleshoot > Printer > select Run Troubleshooter. You may also check the print settings to ensure that the option for black and white/grayscale is not selected.
If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
There`s a trick to printing in color: You must select the color printer in the print menu AND make sure the document is set to print in color under “Printer Properties.” (Most of the time, the color printers default to “color” as the output).
Lexmark`s new generation of color printers and MFPs create our brightest, sharpest, most accurate output ever.
From the home screen, touch Settings > Print > Quality > Advanced Imaging > Color Correction. In the Color Correction menu, touch Manual > Color Correction Content. Choose the appropriate color conversion setting.
You can visually inspect the remaining cartridge levels on your printer. If they are full but you still cannot print properly, check the cartridge`s expiry date. Expired ink cartridges often dry up which causes problems in the print results.
There may be several reasons behind the issue, such as empty ink cartridges, Clogged Print Head Nozzles, and Incorrect Print Settings. There may be a fault in the settings of Color Management as well. You can fix it via Running a Nozzle Check or enabling the Print Settings to Color or Replacing the Ink Cartridges.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Lexmark Printer Problems
ANSWER : just put them in a dark room together. they’ll make out eventually.

Read Full Q/A … :
Unknown Printer

lexmark C544 prints yellow streaks
ANSWER : Are the streaks repeating defects or does it run top-down on the right or left side of the paper ?If you have a vertical yellow shade on the paper, it’s probaly the yellow developer unit which causes the problem. You then can either replace the developer only or (depending on the total number of pages printed, check the statistics !) the complete imaging kit which consists of all four developers and the imaging basket with the Photoconductors.If you see a repeating defect, you should at first print out the print defects page (menue\reports\print defects). Compare the yellow streaks with the printed scales. Above the scales it tells you which component should be changed.

Read Full Q/A … :
Unknown Printer

newly installed printer…can scan but cant be set as a default printer???
ANSWER : ITS AN EPSON L210…

Read Full Q/A … :
Unknown Printer

Lexmark Printer Problems
ANSWER : lexmark printers can be fixed . just follow the steps . uninstall the printer and drivers and install the printer driver and setup again from lexmark and than make sure you internet password and you are all set to go for more visit http://lexmark.technical-care.com/ and i hope this will help you . thanks

Read Full Q/A … :
Unknown Printer

printer not working
ANSWER : Not knowing which printer model (out of over1200) it’s hard to say how to clean the print head. Without the make and model number there is no way we can offer any sound advice.

Read Full Q/A … :
Unknown Printer

when printing front and back, the front will print well but the back will fade
ANSWER : It happens because second side voltage is much higher and the board breaks. Are you getting this issue in auto duplex only, or same error you are getting when you print second side manually?

Read Full Q/A … :
Unknown Printer

Difference Between Laser Printer and InkJet Printer
ANSWER : Laser uses toner which is a powder that gets melted onto the page. Inkjet uses ink that gets squirted onto the page.

Read Full Q/A … :
Unknown Printer

Printer not printing
ANSWER : Try removing the inks, turn the printer upside down and shake it and see what falls out.

Read Full Q/A … :
Unknown Printer