Lexmark Optra S
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
When contacting Lexmark Technical Support or arranging warranty service, you will need to know your printer`s machine (model) type and serial number (SN). This information can be found on the label on the printer`s back cover.
When contacting Lexmark Technical Support or arranging warranty service, you will need to know your printer`s machine (model) type and serial number. Find this information on labels located inside the left door cover and on the back of the machine.
The easiest way to find your printer model is by looking at the front of your printer. Depending on what printer you own, the model name could be on the corners or the center of the front-facing cover. If it is on the front of the machine, it is usually close to the control panel.
Select the Start button, then select Settings > Devices > Printers & scanners . Under Printers & scanners, look for your printer. If you see your printer listed, you`ll know it`s installed.
Select Start > Settings . Go to Bluetooth & devices > Printers & scanners > select a printer. Then select Set as default. If you don`t see the Set as default option, the Let Windows manage my default printer option may be selected.
Simply plug the USB cable from your printer into an available USB port on your PC, and turn the printer on. On the taskbar, select the Search icon, type Printers in the search bar, and then select Printers & scanners from the search results to open the Printers & scanners system setting.
From the Print Management web portal, click Print Job History. The print job history contains the following information: Impressions—A side of a sheet of paper that contains toner. Released From—Shows the printer IP address where the print job is released.
Serial Numbers are normally found on a label on the item but in some cases they are printed in the manual or a piece of paper that came with the item.
A printer is a device that accepts text and graphic output from a computer and transfers the information to paper, usually to standard-size, 8.5″ by 11″ sheets of paper. Printers vary in size, speed, sophistication and cost.
Use the model number found on the equipment itself. This will normally be a printed label or an ID tag, and can usually be found on the frame or supports, underneath the seat, under the foot plate, or near the wheels.
Find the product name, number, and serial number on the label on the printer. The label might be found inside the printer cartridge access area or on the back of the printer. For some older printers, it might also be found on the bottom of the printer.
In your search bar, type the following: cmd. At the command prompt, type the following: wmic bios get serialnumber. Press Enter. You`ll see your serial number.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
info on refilling lexmark 16 cartridges?
ANSWER : Our proven track record includes 20 million cartridges sold since 2004, saving $180 million for our customers who would have otherwise bought new cartridges. Unlike many discount cartridge resellers, Inkplicity is a manufacturer, instead of only a distributor mail order firm. By eliminating the wholesaler and maintaining complete control of our cartridges from product design and development to your doorstep, Inkplicity continuously delivers extraordinary savings and quality to you. For more info -Refilled Cartridges
Read Full Q/A … :
Lexmark Optra S
Lexmark X4650 paper Jamming!!
ANSWER : Well I had two printers that had similar issues – misalignment of paper feed which rendered both printers useless. I shook the Lexmark x4650 a couple of times and then plugged it in and got new paper and voila the misalignment was gone and it actually fed paper like it used to and printed it too.
Read Full Q/A … :
Lexmark Optra S
Lexmark X466 empty tray
ANSWER : The “Load Tray 1 with A4 paper” means the printer is looking for A4 size paper in Tray 1 and that is not what it is detecting. You need to make sure that the paper size that is in the tray matches what the printer is expecting so it understands that it should be looking for a specific size of paper. If you are printing on regular Letter size paper – set the printer tray to Letter instead of A4 and message should go away.
Read Full Q/A … :
Lexmark Optra S
Lexmark paper feed problems
ANSWER : On my X204n Lexmark laser printer, it was doing the same thing you described – basically sounded like it was trying to pick up the paper from the tray and then failing after several seconds. When you’d open the paper tray, the paper looked like it had been partially taken up with some black scuff marks on the paper that lined up with the rollers that take up the paper. I inspected the rollers and although they looked a bit smooth and worn, didn’t seem like they should be a problem. However, this particular model has just a rubber tire almost like a car tire – the rubber can come off the hard plastic wheel on the inner portion. So I popped off the two rubber “tires”, turned them inside out and put them back on. When turned inside out, the rubber looked nice and … rubbery and had a lot more grippy feeling to them. The very first printing attempt after that and the paper sucked up perfectly with no problems. I think the problem is solved! So if you have similar “tires” that take up the paper, try flipping them and see if it works for you too.
Read Full Q/A … :
Lexmark Optra S
Lexmark Printer Problems
ANSWER : lexmark printers can be fixed . just follow the steps . uninstall the printer and drivers and install the printer driver and setup again from lexmark and than make sure you internet password and you are all set to go for more visit http://lexmark.technical-care.com/ and i hope this will help you . thanks
Read Full Q/A … :
Lexmark Optra S
Lexmark T654dn power supply problem
ANSWER : Maybe this Thread may be of use:
Read Full Q/A … :
Lexmark Optra S
Restore settings Lexmark x466
ANSWER : Try this:
Read Full Q/A … :
Lexmark Optra S
Haze and Toner Spots (Lexmark C748de)
ANSWER : Addendum: (continuing the last sentence of my problem description):
Read Full Q/A … :
Lexmark Optra S