Lexmark Optra S

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Make sure that both your computer and your Lexmark printer are connected to your network. Restart your printer. In some cases, a simple restart can fix the issue. Unplug the printer and check if there is any paper stuck in the machine, and if the toner is installed correctly.
Navigate to the Maintenance Page Count menu item using the arrow or the Select button. Navigate to the Reset menu option and then press Select. Press the Return button to come out of the diagnostic mode. Now your toner cartridge chip is reset and you can resume a normal printing operation.
From the Windows desktop click on the Start menu icon. Select Control Panel then navigate to the Devices & Printers section. Find the printer icon for your Lexmark printer and right click to select Printer Properties. Finally, press on Preferences and you`ll see your Lexmark ink/toner levels.
Among the more common technical issues that may bring down a printer are disconnected cables, malfunctioning routers, and low ink levels. Moreover, software problems such as interrupted connections or incorrect settings in your system`s drivers can also cause your printer to show up as offline.
A common reason for this problem is the improper installation of your toner into the drum unit. Check the manual for cartridge installation or reinstall until the printer detects the toner and is ready for printing. Low ink or toner levels after replacement.
The easiest remedy for this is to open the box and stand the cartridge upside down for a few minutes before using. Next, get a damp paper towel, fold it into quarters and the set cartridge print head down onto it, holding it there for three minutes. This will help to prime the print head and pull the ink out.
A resetter is a small plastic tool that physically connects with the printer cartridge chip and tells the chip to reset its memory.
“Toner Error” will appear on your machine`s display if one or more toner cartridges are not installed or not installed correctly.
Turn off the printer and remove the toner cartridge. Look inside the printer in the area below where the cartridge goes. The toner sensor is on the right-hand side.
Most printers will stop working when they`re out of paper, ink or toner, or if the unit detects an issue with the ink or toner cartridge. When this occurs, you might receive an error message or notice blinking green or amber lights on your printer.
Do a hard reset on your printer. To do this you just need to turn off your printer, unplug for a few minutes and then plug the printer again. If that still doesn`t work, try turning the printer and your computer off, and then start it back up again. Try uninstalling and then reinstalling your printer driver.
1: Check Printer Power, Cables, and Paper

Check that the correct paper is properly loaded into the printer and is not jammed. Replacing damaged cables, plugging in loose or disconnected cables, and fixing paper jams as necessary may resolve the issue.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Haze and Toner Spots (Lexmark C748de)
ANSWER : Addendum: (continuing the last sentence of my problem description):

Read Full Q/A … :

Lexmark Optra S

Haze and Toner Spots (Lexmark C748de)
ANSWER : Printer can’t screw up toner cartridges. I hope you aren’t paying for the cartridges. Read this.

Read Full Q/A … :

Lexmark Optra S

Inkjet Cartridges and Toner Refilling Instructions
ANSWER : Step 1: What you require. Printer-ink. You can purchase it from a PC store. …

Read Full Q/A … :

Lexmark Optra S

Toner not transferring
ANSWER : What mostly goes bad in toner cartridges is the drum wiper blade. They deteriorate in new sealed cartridges. Toner caking up, not so much.

Read Full Q/A … :

Lexmark Optra S

Lexmark Printer Problems
ANSWER : lexmark printers can be fixed . just follow the steps . uninstall the printer and drivers and install the printer driver and setup again from lexmark and than make sure you internet password and you are all set to go for more visit http://lexmark.technical-care.com/ and i hope this will help you . thanks

Read Full Q/A … :

Lexmark Optra S

Restore settings Lexmark x466
ANSWER : Try this:

Read Full Q/A … :

Lexmark Optra S

Lexmark X466 empty tray
ANSWER : The “Load Tray 1 with A4 paper” means the printer is looking for A4 size paper in Tray 1 and that is not what it is detecting. You need to make sure that the paper size that is in the tray matches what the printer is expecting so it understands that it should be looking for a specific size of paper. If you are printing on regular Letter size paper – set the printer tray to Letter instead of A4 and message should go away.

Read Full Q/A … :

Lexmark Optra S

Lexmark paper feed problems
ANSWER : On my X204n Lexmark laser printer, it was doing the same thing you described – basically sounded like it was trying to pick up the paper from the tray and then failing after several seconds. When you’d open the paper tray, the paper looked like it had been partially taken up with some black scuff marks on the paper that lined up with the rollers that take up the paper. I inspected the rollers and although they looked a bit smooth and worn, didn’t seem like they should be a problem. However, this particular model has just a rubber tire almost like a car tire – the rubber can come off the hard plastic wheel on the inner portion. So I popped off the two rubber “tires”, turned them inside out and put them back on. When turned inside out, the rubber looked nice and … rubbery and had a lot more grippy feeling to them. The very first printing attempt after that and the paper sucked up perfectly with no problems. I think the problem is solved! So if you have similar “tires” that take up the paper, try flipping them and see if it works for you too.

Read Full Q/A … :

Lexmark Optra S