Lexmark Optra T520

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Defective ink or toner cartridges are one of the most prevalent causes of ink smudges or faded prints. Check to see if all of your ink cartridges are still in good working order. Check that the ink hasn`t dried out and that it`s clear of debris and residue.
1. Check the toner darkness settings. Sometimes light print can be remedied by simply changing the toner darkness setting in the printer. To change the setting, go to MENU>>SETTINGS>>QUALITY MENU>>TONER DARKNESS.
A Bad Toner Cartridge

Usually associated with compatible or re-filled cartridges, a leaky cartridge deposits toner inside your printer and onto your paper in places that it`s not intended, resulting in black spots.

Dots are typically caused by foreign material inside the machine (for example paper dust, glue from labels or envelopes, paper clips, staples) sticking to or damaging the surface of the drum. Toner builds up on or sticks to these areas on the drum and creates black dots on the printed pages.
When the black toner dust and spots appear on the paper, the most likely culprit is leaking Toner Cartridges. We can remove the toner cartridge, on the white cloth or paper. Put it in a few minutes, and then pick it up, find the toner powder residue.
Check the ink levels

Sometimes, the printer may not print black ink because it is low or empty. You can check the ink levels on the printer`s display, or by using the software that came with your printer. If the ink level is low, replace the cartridge or refill it according to the manufacturer`s instructions.

Here are the most common causes of a printer printing faded text or images: Low ink or toner levels. Toner sticking to the fuser roller or problems with the transfer roller. Low ink or toner density settings.
This means the printer is starved of the data it needs to keep printing. Some printers will pause and keep trying, for a little while, but many will just give up at this point and spit out your half printed page. So – the moral of the story is really to always use a wired connection if at all possible.
1 Answer. In the Print dialog, disable “Print in grayscale” if selected, click on the “Advanced” button and make sure that the “Negative” option is not selected. If you can`t deselect “Negative”, change Color option from Composite to Composite Gray, for example, deselect Negative and change Color back to Composite.
When your printer leaves black lines, the lines indicate that there are excess toner powders on the rollers or transfer belt within the printer. As the paper is moved along by the rollers and transfer belt, any excess powder left on them can result in lines being left on the paper.
If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
A printer`s heads, nozzles, and other components can become dirty or clogged, which could show up as white lines running across your page. Your printer may have a head-cleaning feature available through your device software located on your computer or from the control panel on the printer itself.
Usually a quick paper setting adjustment will clear up a ghosting issue right away. Run a cleaning – Most printers have a cleaning function built into the machine. Run this a couple of times to attempt to clear up the printing issue. Inspect the drum – Sometimes excess toner powder can stick to the drum.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Lexmark ms310d starts printing on its own
ANSWER : At first disconnect any data cable between printer and your pc or network. Power up the printer next.

Read Full Q/A … :

Lexmark Optra T520

Black line printing in the middle of the page from top to bottom
ANSWER : Take out the toner cartridge and look at the drum. If you see the line, replace the cartridge. If you don’t, then you need to replace the fuser assembly.

Read Full Q/A … :

Lexmark Optra T520

lexmark x4270 – does not print black
ANSWER : lexmark printers can be fixed . just follow the steps . uninstall the printer and drivers and install the printer driver and setup again from lexmark and than make sure you internet password and you are all set to go for more visit http://lexmark.technical-care.com/ and i hope this will help you . thanks

Read Full Q/A … :

Lexmark Optra T520

Prints blank pages, won't print from computer
ANSWER : Don’t know why you replaced the fuser, but assuming you had print before, then it must have been something you did during the procedure. Only thing I can suggest is to recheck your work. Just because you reinstalled a connector doesn’t mean that it is seated firmly enough to work. Any flat ribbon connectors that you removed and reinstalled, check to see that the contacts are all flat and not peeled back.

Read Full Q/A … :

Lexmark Optra T520

changing from printing in photo black to black ink
ANSWER : You can change the black ink cartridge and choose either Matte Black or Photo Black.You will need to use the Black Ink Conversion Kit that came with your printer. The kit includes three conversion cartridges (yellow, magenta, and cyan), which are used to reduce the amount of ink consumed in the conversion. dissertation writing service

Read Full Q/A … :

Lexmark Optra T520

Canon i560 Will not print black
ANSWER : Dang, it worked for me then wentback to normal (not working) after the test page. Oh well not bad for a 10 year old bubble jet.

Read Full Q/A … :

Lexmark Optra T520

Black line on printed copy
ANSWER : Have absolutely no idea what kind of machine you have so here’s the generic answer. Big copy glass, little copy glass to the left of it. Take window cleaner, put it on paper towel, clean little glass.

Read Full Q/A … :

Lexmark Optra T520

Lexmark Printer Problems
ANSWER : lexmark printers can be fixed . just follow the steps . uninstall the printer and drivers and install the printer driver and setup again from lexmark and than make sure you internet password and you are all set to go for more visit http://lexmark.technical-care.com/ and i hope this will help you . thanks

Read Full Q/A … :

Lexmark Optra T520