Lexmark Optra T430
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
The Load Tray 1, Tray 1 Missing, or Insert Tray 1 error messages indicate that the printer has failed to detect the tray. The Tray Low or Tray Empty errors indicate that one or more of the tray sources are empty or low.
When the printer tells you to load tray 1 it means the size and or type of paper being asked by the print job does not match the same that the printer thinks it has in the tray.
Solution: An incorrect paper size was selected when printing. Select Options then leave the tray selected and press OK. Your print job will now print on the 8.5×11 paper available in the printer.
Solution. Open the tray for more than one second, verify that paper is loaded, and then close the tray. This should eliminate the “Tray Empty” message so the printer can resume printing.
The message “[TRAY] Empty” appears when there is no paper in the indicated paper tray and thus the device cannot start printing. Load paper in the indicated paper tray.
Improve printer performance by selecting the optimum paper type for the tray. You can select from the following paper types: Tray 1. [Thin Paper], [Thick Paper 1], [Thick Paper 2], [Plain Paper], [Recycled Paper], [Color Paper], [Preprinted], [Prepunched], [Letterhead], [Bond Paper], [Cardstock], [Label Paper]
An example message would be 024-965 Load Tray 1 Letter Plain. This indicates that the print job sent has requested Letter sized Plain paper from Tray 1. If tray 1 is empty, loaded with A4 sized Plain paper, or Letter sized Thick paper this error will occur.
Most times when this happens there is a mismatch between what the printer thinks it has in the paper tray and what the job is asking for. Most times if you set tray 2 for the correct size and then choose type as any it will solve the issue. The tray may be set for bond or something else.
Open the tray and do one or more of the following: Check for paper jams or misfeeds. Check if the paper size indicators on the paper guides are aligned with the paper size indicators on the tray. If you are printing on custom‑size paper, then make sure that the paper guides rest against the edges of the paper.
The most common cause of the Surfer error “Print aborted Code = -1” is insufficient memory on the printer.
Click the Copy/Print or Print tab. Open the Manage Trays menu. Modify the tray settings.
If there is paper in the tray but the printer is not picking the paper, open the tray and flip the paper stack over. Load a fresh ream of paper and observe whether the issue remains. If the issue persists, remove the whole tray out and inspect the bottom of the tray for any paper debris or obstructions.
Printed paper is output to the output tray on the top of the printer with the printed side facing down. Before printing paper, open the output tray to output the printed paper.
Extra trays are generally used for types of paper that are need regularly such as letter head or larger paper sizes.
Printer is an output device that allows a user to print items on paper, such as letters and pictures. 1. It is used for printing a text. 2.
Open the front cover and remove the paper. Pull Front Cover Open Lever, and then open the front cover with both hands carefully. Carefully pull the jammed paper upward and out. If paper has jammed inside the transfer unit, holding both sides of the paper, pull the paper carefully forward and out.
The Paper Type setting must be set manually for all trays that do not contain plain paper. From the home screen navigate or tap: Menu icon > Paper Menu > Paper Size/Type > select a tray > select the paper size or type > Submit.
The T1 shipping note is a customs document used in the cross-border movement of goods for transporting customs goods from one customs office to another. Basically, the T1 note is used to carry non-EU goods within the EU territory.
The tray (the paper tray (Tray 1/2/3/4), or the MP tray) matching the paper size and type that are set in the printer driver will be selected automatically for printing. Trays are selected according to the setting of [Tray Sequence].
The paper tray is empty or overloaded. The paper is curled. The print side, or shiny side, of the paper is not loaded in the paper tray face up. For photo paper, always load the rougher side of the paper facing down.
From the home screen, touch Settings > Device > Maintenance > Configuration Menu > Supply Usage And Counters. Select Fuser Reset or ITM Reset.
Make sure that both your computer and your Lexmark printer are connected to your network. Restart your printer. In some cases, a simple restart can fix the issue. Unplug the printer and check if there is any paper stuck in the machine, and if the toner is installed correctly.
Leave the printer powered off for at least one minute. Power the printer back on. If powering the printer off and on clears the error, continue using the printer but keep an eye on it to see if any printhead errors return.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
My printer feeds through one piece of paper all the way and then a half piece of paper and stops. I pull out the paper to stop the paper jam and then it prints but sounds rough. After printing, it doesn't feed the paper all the way through.
ANSWER : And the first 2 sheets, the full and half sheet that go through first, are blank.
Tray 1 (upper tray) paper feed problem
ANSWER : There is no way of adjusting the distance of lift. Could be that the pickup roller is worn enough that it will pick up a sheet that is higher, but not one that is lower down. You can look at the end of the roller that first makes contact and see if it is worn smooth.
Paper jam in tray 2 (but no paper pulled from tray) also M476DN models
ANSWER : Isopropyl alcohol is not recommended for rubber rollers. It dries out the rubber and hasten it’s cracking and breaking. It will do nothing to restore the grip. Those rollers are really hard to replace. It would be easy if that dumbass secondary menu really worked. None of the techs I’ve spoke to ever got into it. Everyone I know sends a print job and listens for the roller to rotate into position where you can pull it off.
Lexmark X4650 paper Jamming!!
ANSWER : Well I had two printers that had similar issues – misalignment of paper feed which rendered both printers useless. I shook the Lexmark x4650 a couple of times and then plugged it in and got new paper and voila the misalignment was gone and it actually fed paper like it used to and printed it too.
Lexmark paper feed problems
ANSWER : On my X204n Lexmark laser printer, it was doing the same thing you described – basically sounded like it was trying to pick up the paper from the tray and then failing after several seconds. When you’d open the paper tray, the paper looked like it had been partially taken up with some black scuff marks on the paper that lined up with the rollers that take up the paper. I inspected the rollers and although they looked a bit smooth and worn, didn’t seem like they should be a problem. However, this particular model has just a rubber tire almost like a car tire – the rubber can come off the hard plastic wheel on the inner portion. So I popped off the two rubber “tires”, turned them inside out and put them back on. When turned inside out, the rubber looked nice and … rubbery and had a lot more grippy feeling to them. The very first printing attempt after that and the paper sucked up perfectly with no problems. I think the problem is solved! So if you have similar “tires” that take up the paper, try flipping them and see if it works for you too.
Error message to load paper and push OK, but not out of paper
ANSWER : I assist the binary options for a long time, and only half this past year I decided to alter the strategy for a better, she called for help Bing and he gave me this web site http://bestoptionstrategies.net .Now I focus on the suitable technique for themselves, and things gone up. I think everybody else faced with this particular problem. I believe my estimation will soon be helpful to you.
Error Message "Paper out" when paper loaded
ANSWER : Check your paper tray settings as printer may be looking for paper from the manual feed tray on top of printer.
Paper Jam Tray 1
ANSWER : Tray No. 1 (the feeder) has to be either FULLY closed or FULLY down, down to about a 45 degree angle. Then hit the OK button and it should Initialize and start working. This solution is for when there is actually NO paper jamming the printer.