Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Navigate to Settings > Print > Quality > Print Mode and check whether it is set to “Black and White” then change it to “Color”. Navigate to Settings > Device > Maintenance > Configuration Menu > Print Configuration > Black Only Mode. Make sure this option is unchecked.
First, check your printer settings on the file or picture your trying to print. If your page is setup to print in “grayscale” it will only print in black and white. Change the setting to “default” so it will print in color. If your settings look good from the start, the cartridge may just need to be primed.
Check the ink levels

Sometimes, the printer may not print black ink because it is low or empty. You can check the ink levels on the printer`s display, or by using the software that came with your printer. If the ink level is low, replace the cartridge or refill it according to the manufacturer`s instructions.

1. Check the toner darkness settings. Sometimes light print can be remedied by simply changing the toner darkness setting in the printer. To change the setting, go to MENU>>SETTINGS>>QUALITY MENU>>TONER DARKNESS.
If your printer is having issues printing black ink, the black ink might be low, and the printer might be running in backup mode. Check estimated ink levels to see if any ink cartridges are critically low or empty.
The answer is yes, your printer uses a bit of all colors (black, cyan, magenta, yellow) every time it prints. According to HP Support, “[our] printers are designed in such a way that it also uses color inks while printing in black to form a perfect black. This is called as K-fortification in printer terms.
If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
Several factors may cause the product to print blank pages, such as print settings, low ink, or the product itself. Check the following: Make sure the product is placed on a flat, stable surface that extends beyond the base in all directions. The product won`t operate properly if it`s tilted or at an angle.
Many printer models require at least some ink in all cartridges to keep printing. However, if you`re lucky, your software may allow you to squeeze out the rest of your color ink without using black.
Make sure that both your computer and your Lexmark printer are connected to your network. Restart your printer. In some cases, a simple restart can fix the issue. Unplug the printer and check if there is any paper stuck in the machine, and if the toner is installed correctly.
A common cause of faded, faint printouts from your inkjet printer is dried ink particles causing a blockage in your printer. The printheads on an ink cartridge can be become blocked if the printer is not used for a period of time, so it is recommended to print a few pages each month to maintain the print quality.
The Blank Pages setting is set to print any `blank page` commands used by the software/program on the computer. Use the Local Printer Setup Utility program on the computer and access the printer settings. Locate the Blank Pages setting. Make sure that the Blank Pages setting is set to Do Not Print.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

my printer prints only cyan and black
ANSWER : If it was printing OK before you refilled the cartridge and you cleaned the heads, then your only other option would be to replace the cartridge.

Read Full Q/A … :
Unknown Printer

lexmark x4270 – does not print black
ANSWER : lexmark printers can be fixed . just follow the steps . uninstall the printer and drivers and install the printer driver and setup again from lexmark and than make sure you internet password and you are all set to go for more visit http://lexmark.technical-care.com/ and i hope this will help you . thanks

Read Full Q/A … :
Unknown Printer

when printing front and back, the front will print well but the back will fade
ANSWER : It happens because second side voltage is much higher and the board breaks. Are you getting this issue in auto duplex only, or same error you are getting when you print second side manually?

Read Full Q/A … :
Unknown Printer

newly installed printer…can scan but cant be set as a default printer???
ANSWER : ITS AN EPSON L210…

Read Full Q/A … :
Unknown Printer

Lexmark Printer Problems
ANSWER : lexmark printers can be fixed . just follow the steps . uninstall the printer and drivers and install the printer driver and setup again from lexmark and than make sure you internet password and you are all set to go for more visit http://lexmark.technical-care.com/ and i hope this will help you . thanks

Read Full Q/A … :
Unknown Printer

Lexmark Printer Problems
ANSWER : just put them in a dark room together. they’ll make out eventually.

Read Full Q/A … :
Unknown Printer

Difference Between Laser Printer and InkJet Printer
ANSWER : Laser uses toner which is a powder that gets melted onto the page. Inkjet uses ink that gets squirted onto the page.

Read Full Q/A … :
Unknown Printer

PRINTER FAILS TO PRINT BLACK TEXTS/IMAGES
ANSWER : https://www.youtube.com/watch?v=f57jOGj-G5s

Read Full Q/A … :
Unknown Printer