How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
If your printer`s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn`t open and the paper isn`t jammed.
Make sure that the printer is on the same network with the computer. Make sure that you are using a known working Ethernet cable. Make sure that the Ethernet cable is connected at the back of the printer to the network router, switch, or other network source to which the computer is also connected.
Make sure that both your computer and your Lexmark printer are connected to your network. Restart your printer. In some cases, a simple restart can fix the issue. Unplug the printer and check if there is any paper stuck in the machine, and if the toner is installed correctly.
From the home screen, touch Settings > Device > Restore Factory Defaults. In the Restore Settings menu, select the settings that you want to restore. Touch RESTORE.
Do a hard reset on your printer. To do this you just need to turn off your printer, unplug for a few minutes and then plug the printer again. If that still doesn`t work, try turning the printer and your computer off, and then start it back up again. Try uninstalling and then reinstalling your printer driver.
Many computer connectivity issues are caused by something as simple as a loose cable. Make sure all of the cables connecting your computer to your printer are fully in place and completely fastened at both ends. If your printer is not turning on, the power cord could also be an issue.
Right-click on the printer icon and select `properties` from the menu. Find the `general` tab within the properties menu and then look for the `location` field. The numbers that appear to the right of this field make up your printer`s IP address.
Every printer contains an IP address that allows it to seamlessly connect to your computer (or other devices) through your Wi-Fi network.
Volatile memory requires power to store the information. Deleting volatile memory is easy: Simply shut down or unplug your printer for a minute or so. Most printers also have non-volatile memory (a hard drive) that is stored until you physically delete it.
After replacing all the items in the maintenance kit, reset the maintenance counter: 1 Press and hold the Select and Return buttons while you turn the printer on. 2 Release the buttons when Performing Self Test appears on the display.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
info on refilling lexmark 16 cartridges?
Our proven track record includes 20 million cartridges sold since 2004, saving $180 million for our customers who would have otherwise bought new cartridges. Unlike many discount cartridge resellers, Inkplicity is a manufacturer, instead of only a distributor mail order firm. By eliminating the wholesaler and maintaining complete control of our cartridges from product design and development to your doorstep, Inkplicity continuously delivers extraordinary savings and quality to you. For more info -Refilled Cartridges
Lexmark X4650 paper Jamming!!
Well I had two printers that had similar issues – misalignment of paper feed which rendered both printers useless. I shook the Lexmark x4650 a couple of times and then plugged it in and got new paper and voila the misalignment was gone and it actually fed paper like it used to and printed it too.
Lexmark X466 empty tray
The “Load Tray 1 with A4 paper” means the printer is looking for A4 size paper in Tray 1 and that is not what it is detecting. You need to make sure that the paper size that is in the tray matches what the printer is expecting so it understands that it should be looking for a specific size of paper. If you are printing on regular Letter size paper – set the printer tray to Letter instead of A4 and message should go away.
Lexmark paper feed problems
On my X204n Lexmark laser printer, it was doing the same thing you described – basically sounded like it was trying to pick up the paper from the tray and then failing after several seconds. When you’d open the paper tray, the paper looked like it had been partially taken up with some black scuff marks on the paper that lined up with the rollers that take up the paper. I inspected the rollers and although they looked a bit smooth and worn, didn’t seem like they should be a problem. However, this particular model has just a rubber tire almost like a car tire – the rubber can come off the hard plastic wheel on the inner portion. So I popped off the two rubber “tires”, turned them inside out and put them back on. When turned inside out, the rubber looked nice and … rubbery and had a lot more grippy feeling to them. The very first printing attempt after that and the paper sucked up perfectly with no problems. I think the problem is solved! So if you have similar “tires” that take up the paper, try flipping them and see if it works for you too.
Lexmark Printer Problems
lexmark printers can be fixed . just follow the steps . uninstall the printer and drivers and install the printer driver and setup again from lexmark and than make sure you internet password and you are all set to go for more visit http://lexmark.technical-care.com/ and i hope this will help you . thanks
Lexmark T654dn power supply problem
Maybe this Thread may be of use:
Restore settings Lexmark x466
Haze and Toner Spots (Lexmark C748de)
Addendum: (continuing the last sentence of my problem description):