Lexmark Optra T

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

1 Place an original document facedown on the scanner glass in the upper left corner. 2 From the home screen, navigate to: Copy > specify the copy settings > Copy It If you have more pages to scan, then place the next document on the scanner glass, and then touch Scan the next page. 3 Touch Finish the Job.
Make sure that both your computer and your Lexmark printer are connected to your network. Restart your printer. In some cases, a simple restart can fix the issue. Unplug the printer and check if there is any paper stuck in the machine, and if the toner is installed correctly.
Duplex scanning is a feature of some computer scanners, and multifunction printers (MFPs) that support duplex printing. A duplex scanner can automatically scan a sheet of paper on both sides. Scanners without this capability can only scan both sides of a sheet of paper by reinserting it manually the other way up.
Click File > Print. Under Settings, click One page per sheet, and then choose Multiple copies per sheet in the list. Click Layout Options, and then adjust the margins and gaps.
Some of the most common printer problems that most of us have experienced include paper jamming, slow printing, uneven printing, and wrong colour output. If you use your printer frequently, we know how annoying it can be to have persisting problems with the printer.
300 dpi is a standard benchmark for an excellent print. 200 dpi will still produce a decent image. 150 dpi can be acceptable if you`re viewing the print from a few feet away.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Scanning and copying faint image
ANSWER : The scanning is done by light bouncing off of some mirrors. Could be dust on one of the mirrors. Try shining a light down into the scanner unit and look at the mirror that is visible and see if it has dust coating on the side that is light.

Read Full Q/A … :

Lexmark Optra T

Lexmark paper feed problems
ANSWER : On my X204n Lexmark laser printer, it was doing the same thing you described – basically sounded like it was trying to pick up the paper from the tray and then failing after several seconds. When you’d open the paper tray, the paper looked like it had been partially taken up with some black scuff marks on the paper that lined up with the rollers that take up the paper. I inspected the rollers and although they looked a bit smooth and worn, didn’t seem like they should be a problem. However, this particular model has just a rubber tire almost like a car tire – the rubber can come off the hard plastic wheel on the inner portion. So I popped off the two rubber “tires”, turned them inside out and put them back on. When turned inside out, the rubber looked nice and … rubbery and had a lot more grippy feeling to them. The very first printing attempt after that and the paper sucked up perfectly with no problems. I think the problem is solved! So if you have similar “tires” that take up the paper, try flipping them and see if it works for you too.

Read Full Q/A … :

Lexmark Optra T

problem in copying or scanning
ANSWER : Nice day. (QUALITY IS OUR CULTURE)

Read Full Q/A … :

Lexmark Optra T

Horrible lines in copying or scanning
ANSWER : If you are using the ADF, all pages are scanned with the scanner stationary on the left side. There is a small glass above the scanner and if there is anything on it, dust, whiteout, ink etc. it will interpret it as a line. First solution would be to clean the glass with window cleaner and a paper towel. If that doesn’t solve it, then scan the page on the flat glass and see if the problem continues.

Read Full Q/A … :

Lexmark Optra T

Restore settings Lexmark x466
ANSWER : Try this:

Read Full Q/A … :

Lexmark Optra T

Lexmark Printer Problems
ANSWER : lexmark printers can be fixed . just follow the steps . uninstall the printer and drivers and install the printer driver and setup again from lexmark and than make sure you internet password and you are all set to go for more visit http://lexmark.technical-care.com/ and i hope this will help you . thanks

Read Full Q/A … :

Lexmark Optra T

Lexmark X466 empty tray
ANSWER : The “Load Tray 1 with A4 paper” means the printer is looking for A4 size paper in Tray 1 and that is not what it is detecting. You need to make sure that the paper size that is in the tray matches what the printer is expecting so it understands that it should be looking for a specific size of paper. If you are printing on regular Letter size paper – set the printer tray to Letter instead of A4 and message should go away.

Read Full Q/A … :

Lexmark Optra T

Haze and Toner Spots (Lexmark C748de)
ANSWER : Printer can’t screw up toner cartridges. I hope you aren’t paying for the cartridges. Read this.

Read Full Q/A … :

Lexmark Optra T