Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

If your printer`s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn`t open and the paper isn`t jammed.
Turn off the printer and turn it on again after a minute. Make sure that the printer is on the Ready state, otherwise capture the error message and restart the printer once more. Check the actual connection of the printer. Make sure that the printer is on the same network with the computer.
Make sure that both your computer and your Lexmark printer are connected to your network. Restart your printer. In some cases, a simple restart can fix the issue. Unplug the printer and check if there is any paper stuck in the machine, and if the toner is installed correctly.
From the home screen, touch Settings > Device > Restore Factory Defaults. In the Restore Settings menu, select the settings that you want to restore. Touch RESTORE.
Many computer connectivity issues are caused by something as simple as a loose cable. Make sure all of the cables connecting your computer to your printer are fully in place and completely fastened at both ends. If your printer is not turning on, the power cord could also be an issue.
Do a hard reset on your printer. To do this you just need to turn off your printer, unplug for a few minutes and then plug the printer again. If that still doesn`t work, try turning the printer and your computer off, and then start it back up again. Try uninstalling and then reinstalling your printer driver.
Open your printer`s Control Panel. Go to Settings. Click Wireless Settings. Print a page called Network Configuration, which will contain your printer`s IP address.
Every printer contains an IP address that allows it to seamlessly connect to your computer (or other devices) through your Wi-Fi network.
Select Start , then select Settings > Devices > Printers & scanners . Under Printers & scanners, find the printer, select it, and then select Remove device. After removing your printer, add it back by selecting Add a printer or scanner.
Remove the toner cartridge and gently wipe to remove any dust or toner underneath with a dry cloth. If you notice excess toner inside the print device, it may be possible to remove it using a vacuum that is specifically designed to capture fine dust particles like toner powder. These vacuums can be costly, however.
To remove printer and driver on Windows 10, open Settings > Printers & scanners, select the printer, and click “Remove device.” Then open Print management > Custom Filters > All Drivers, right-click the driver, and select “Delete.”
Volatile memory requires power to store the information. Deleting volatile memory is easy: Simply shut down or unplug your printer for a minute or so. Most printers also have non-volatile memory (a hard drive) that is stored until you physically delete it.
Restoring the factory-set defaults returns most of the settings to the factory defaults. It will not reset the page count, tray size, or language.
Reset. Resetting the printer stops printing and clears the current print job received from the active interface. You may want to reset the printer when there is a problem with the print job itself and the printer cannot print successfully.
A connection to the printer could not be made. The printer may be offline, malfunctioning, or busy. Verify the following items, and then resubmit your print job: Confirm that the printer is powered on and displays Ready.
The Print Spooler is software built into the Windows operating system that temporarily stores print jobs in the computer`s memory until the printer is ready to print them. In some circumstances you may need to stop and/or restart the service.
Lexmark Error Code(s):20, 21, 22, 23, 200.13, 200, 201(Paper Jam) Error: In other words, you have got a paper jam, one of the most common issues among printers all around. Now remove the paper tray and reinstall it and then re-install either the toner or ink cartridge.
After replacing all the items in the maintenance kit, reset the maintenance counter: 1 Press and hold the Select and Return buttons while you turn the printer on. 2 Release the buttons when Performing Self Test appears on the display.
Common Causes of Lexmark Printer Offline Status

Some of the common causes include: Connectivity issues – If your printer is not connected to the network or the connection is weak, it may show an offline status. Outdated drivers – If your printer drivers are outdated or corrupted, it may cause the printer to go offline.

Select the Start button, then select Settings > Devices > Printers & scanners. Under Add printers & scanners, select Add a printer or scanner. Choose the printer you want, and then select Add Device. If you don`t see the printer you want, select The printer that I want isn`t listed.
An Internet Protocol (IP) address is a unique numerical identifier for every device or network that connects to the internet. Typically assigned by an internet service provider (ISP), an IP address is an online device address used for communicating across the internet.
No two devices connected to the same wireless network will have the same IP address. It should be different.
Click on “Wi-Fi network” in the taskbar. Select the network you`re connected to. Click on “Properties.” Scroll down to the bottom of the window — your IP will be shown next to “IPv4 address.”
By default, most printers use a dynamic IP address, which changes from time to time. This can make it hard to connect to your printer, especially when you make changes to your network.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Haze and Toner Spots (Lexmark C748de)
ANSWER : Printer can’t screw up toner cartridges. I hope you aren’t paying for the cartridges. Read this.

Read Full Q/A … :
Unknown Printer

Lexmark MS410dn not picking up paper
ANSWER : What colour are the pick rolls ? The new and enhanced pick roll tires for this series are green ones, P/N is 41X0918. The old ones in grey produced the pick errors due to a manufacturing fault. You can test the rolls by removing the tires and clean the roller profile with a roller rejuvenator liquid. Or simply use a cotton cloth with some dishwashing liquid. Clean the tires under warm water. If this works (temporarily) – replace the roller tires in your printers. That has almost every time for me.Good Luck,Andreas

Read Full Q/A … :
Unknown Printer

Lexmark X466 empty tray
ANSWER : The “Load Tray 1 with A4 paper” means the printer is looking for A4 size paper in Tray 1 and that is not what it is detecting. You need to make sure that the paper size that is in the tray matches what the printer is expecting so it understands that it should be looking for a specific size of paper. If you are printing on regular Letter size paper – set the printer tray to Letter instead of A4 and message should go away.

Read Full Q/A … :
Unknown Printer

Lexmark paper feed problems
ANSWER : On my X204n Lexmark laser printer, it was doing the same thing you described – basically sounded like it was trying to pick up the paper from the tray and then failing after several seconds. When you’d open the paper tray, the paper looked like it had been partially taken up with some black scuff marks on the paper that lined up with the rollers that take up the paper. I inspected the rollers and although they looked a bit smooth and worn, didn’t seem like they should be a problem. However, this particular model has just a rubber tire almost like a car tire – the rubber can come off the hard plastic wheel on the inner portion. So I popped off the two rubber “tires”, turned them inside out and put them back on. When turned inside out, the rubber looked nice and … rubbery and had a lot more grippy feeling to them. The very first printing attempt after that and the paper sucked up perfectly with no problems. I think the problem is solved! So if you have similar “tires” that take up the paper, try flipping them and see if it works for you too.

Read Full Q/A … :
Unknown Printer

Lexmark Printer Problems
ANSWER : lexmark printers can be fixed . just follow the steps . uninstall the printer and drivers and install the printer driver and setup again from lexmark and than make sure you internet password and you are all set to go for more visit http://lexmark.technical-care.com/ and i hope this will help you . thanks

Read Full Q/A … :
Unknown Printer

info on refilling lexmark 16 cartridges?
ANSWER : Our proven track record includes 20 million cartridges sold since 2004, saving $180 million for our customers who would have otherwise bought new cartridges. Unlike many discount cartridge resellers, Inkplicity is a manufacturer, instead of only a distributor mail order firm. By eliminating the wholesaler and maintaining complete control of our cartridges from product design and development to your doorstep, Inkplicity continuously delivers extraordinary savings and quality to you. For more info -Refilled Cartridges

Read Full Q/A … :
Unknown Printer

Restore settings Lexmark x466
ANSWER : Try this:

Read Full Q/A … :
Unknown Printer

Lexmark T654dn power supply problem
ANSWER : Maybe this Thread may be of use:

Read Full Q/A … :
Unknown Printer