Lexmark X 2500

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Leave the printer powered off for at least one minute. Power the printer back on. If powering the printer off and on clears the error, continue using the printer but keep an eye on it to see if any printhead errors return. If the printer continues to display a printhead error message, check the message.
Lexmark Error Code(s):20, 21, 22, 23, 200.13, 200, 201(Paper Jam) Error: In other words, you have got a paper jam, one of the most common issues among printers all around. Now remove the paper tray and reinstall it and then re-install either the toner or ink cartridge.
Your printer displays the “Missing or Failed Printhead” error to signal a malfunctioning printhead. The issue could be due to clogged ink nozzles, dirty ink cartridges, internal paper jams, and more. HP printers may also display this error if the printhead pulls air from ink cartridges.
Error 31.21 – Capacitive Toner Level Sensing (CTLS) reading out of range. Possible issue exists with the CTLS contacts or Controller Board. Remove and re-install the Imaging Unit; ensure that it is seated properly.
A print head scratch occurs when an accumulation of dust or debris gets stuck in your machine. And if this happens, the damage cannot be fixed. In most cases, you would need to purchase a new printhead. That`s why it`s important to keep the dust out, away from your machine.
Although different brands of cleaning solution will slightly vary when it comes to ingredients and ingredient ratios, they are largely based on the same three components: Distilled water. Isopropyl alcohol. Detergent.
In Windows, go to Printer Properties > Maintenance > Clean Heads > OK and follow on-screen prompts.
From the home screen, touch Settings > Device > Restore Factory Defaults. In the Restore Settings menu, select the settings that you want to restore. Touch RESTORE.
If this is the first time a Service Fuser error has appeared on the printer, power it off. Wait ten seconds, and then power the printer on again. The printer should come up to the Ready state. If it does, try printing again.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Error Code 51.1 says Printer Error No Kidding.lol
ANSWER : Sometimes turning off and on will allow you to print a few pages. The error is a beam detect error. The only real fix is to replace the laser scanner unit. Could be a loose connector on the scanner or DC controller from the scanner. That’s unlikely. You could try the only other free fix which is to open the scanner assy. and clean all the mirrors inside. The dust could obstruct the laser beam enough to cause the detect error.

Read Full Q/A … :

Lexmark X 2500

info on refilling lexmark 16 cartridges?
ANSWER : Our proven track record includes 20 million cartridges sold since 2004, saving $180 million for our customers who would have otherwise bought new cartridges. Unlike many discount cartridge resellers, Inkplicity is a manufacturer, instead of only a distributor mail order firm. By eliminating the wholesaler and maintaining complete control of our cartridges from product design and development to your doorstep, Inkplicity continuously delivers extraordinary savings and quality to you. For more info -Refilled Cartridges

Read Full Q/A … :

Lexmark X 2500

Restore settings Lexmark x466
ANSWER : Try this:

Read Full Q/A … :

Lexmark X 2500

Lexmark Printer Problems
ANSWER : lexmark printers can be fixed . just follow the steps . uninstall the printer and drivers and install the printer driver and setup again from lexmark and than make sure you internet password and you are all set to go for more visit http://lexmark.technical-care.com/ and i hope this will help you . thanks

Read Full Q/A … :

Lexmark X 2500

Lexmark X466 empty tray
ANSWER : The “Load Tray 1 with A4 paper” means the printer is looking for A4 size paper in Tray 1 and that is not what it is detecting. You need to make sure that the paper size that is in the tray matches what the printer is expecting so it understands that it should be looking for a specific size of paper. If you are printing on regular Letter size paper – set the printer tray to Letter instead of A4 and message should go away.

Read Full Q/A … :

Lexmark X 2500

Error "printhead does not moves"
ANSWER : Usually there is a piece of wadded up paper at the far right that the printhead hits.

Read Full Q/A … :

Lexmark X 2500

Lexmark paper feed problems
ANSWER : On my X204n Lexmark laser printer, it was doing the same thing you described – basically sounded like it was trying to pick up the paper from the tray and then failing after several seconds. When you’d open the paper tray, the paper looked like it had been partially taken up with some black scuff marks on the paper that lined up with the rollers that take up the paper. I inspected the rollers and although they looked a bit smooth and worn, didn’t seem like they should be a problem. However, this particular model has just a rubber tire almost like a car tire – the rubber can come off the hard plastic wheel on the inner portion. So I popped off the two rubber “tires”, turned them inside out and put them back on. When turned inside out, the rubber looked nice and … rubbery and had a lot more grippy feeling to them. The very first printing attempt after that and the paper sucked up perfectly with no problems. I think the problem is solved! So if you have similar “tires” that take up the paper, try flipping them and see if it works for you too.

Read Full Q/A … :

Lexmark X 2500

Lexmark T654dn power supply problem
ANSWER : Maybe this Thread may be of use:

Read Full Q/A … :

Lexmark X 2500