Lexmark P 6200

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Ways to check if Black Only is enabled

Navigate to Settings > Print > Quality > Print Mode and check whether it is set to “Black and White” then change it to “Color”. Navigate to Settings > Device > Maintenance > Configuration Menu > Print Configuration > Black Only Mode. Make sure this option is unchecked.

Make sure the Black/Grayscale or Grayscale setting is not selected in your printer software. Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary. The ink cartridges may be old or low on ink, and you may need to replace them.
From the home screen, touch Settings > Print > Quality > Advanced Imaging > Color Correction. In the Color Correction menu, touch Manual > Color Correction Content. Choose the appropriate color conversion setting.
It is a simple process to activate the unsupported Lexmark cartridge override: Hold down the green button* and the cancel (X) button simultaneously. Upon activating the override, the error message will go away and the printer will do a semi-reboot.
Lexmark`s new generation of color printers and MFPs create our brightest, sharpest, most accurate output ever.
Kindly go to Start > Settings > Update and Security > Troubleshoot > Printer > select Run Troubleshooter. You may also check the print settings to ensure that the option for black and white/grayscale is not selected.
Check the ink levels

Sometimes, the printer may not print black ink because it is low or empty. You can check the ink levels on the printer`s display, or by using the software that came with your printer. If the ink level is low, replace the cartridge or refill it according to the manufacturer`s instructions.

Color Saver

Reduce the amount of toner used for graphics and images. The amount of toner used for text is not reduced.

CMYK color mode is used for printing.
Just above the circuit board on most printer cartridges, you`ll find a small button. You`ve seen these tiny buttons before on cell phones, phone chargers, etc. This is your reset button, and the only way to get in there is either with a paper clip or the tip of a pen (which will leave a tiny ink smudge on the button).
Clean the printheads: Sometimes the issue why you are unable to print in color is because our printheads are clogged with ink. Clean the printheads and then print a document to check if color printing works. Some printers also have in-built programs that can clean themselves so remember to check for that.
First, check your printer settings on the file or picture your trying to print. If your page is setup to print in “grayscale” it will only print in black and white. Change the setting to “default” so it will print in color. If your settings look good from the start, the cartridge may just need to be primed.
Clean the printheads: Sometimes the issue why you are unable to print in color is because our printheads are clogged with ink. Clean the printheads and then print a document to check if color printing works. Some printers also have in-built programs that can clean themselves so remember to check for that.
First, check your printer settings on the file or picture your trying to print. If your page is setup to print in “grayscale” it will only print in black and white. Change the setting to “default” so it will print in color. If your settings look good from the start, the cartridge may just need to be primed.
Several factors may cause the product to print blank pages, such as print settings, low ink, or the product itself. Check the following: Make sure the product is placed on a flat, stable surface that extends beyond the base in all directions. The product won`t operate properly if it`s tilted or at an angle.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

My 2550n Color LaserJet does not want to print in color
ANSWER : That model had issues with the carousel solenoid sticking. That might explain why it works after you let it sit for 10 minutes. The solenoid gets hotter with use which causes the deteriorated foam on it to become sticky and hold down the release plate instead of letting it go. This allows the carousel to spin when it is supposed to stop for each color. The solenoid is located on the right side of the printer. If you open the lid, it is just behind the opening at the top right. You need to remove the top of the printer and scrape off the goo on top of the solenoid body. I put a piece of thin sticky backed felt to replace it. Other people use electrical tape.

Read Full Q/A … :

Lexmark P 6200

HP Color Laserjet 3800 problem when printing color
ANSWER : Do a cold reset

Read Full Q/A … :

Lexmark P 6200

Printer won't print
ANSWER : Wow, you’re just a wealth of information. Take it in for service or buy a new one.

Read Full Q/A … :

Lexmark P 6200

Lexmark Printer Problems
ANSWER : lexmark printers can be fixed . just follow the steps . uninstall the printer and drivers and install the printer driver and setup again from lexmark and than make sure you internet password and you are all set to go for more visit http://lexmark.technical-care.com/ and i hope this will help you . thanks

Read Full Q/A … :

Lexmark P 6200

when printing front and back, the front will print well but the back will fade
ANSWER : It happens because second side voltage is much higher and the board breaks. Are you getting this issue in auto duplex only, or same error you are getting when you print second side manually?

Read Full Q/A … :

Lexmark P 6200

Printer not printing
ANSWER : Try removing the inks, turn the printer upside down and shake it and see what falls out.

Read Full Q/A … :

Lexmark P 6200

color is not printing true
ANSWER : I changed all toners and drum and it is still doing it.

Read Full Q/A … :

Lexmark P 6200

Difference Between Laser Printer and InkJet Printer
ANSWER : Laser uses toner which is a powder that gets melted onto the page. Inkjet uses ink that gets squirted onto the page.

Read Full Q/A … :

Lexmark P 6200