Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Creases and folds in the paper are normally due to one of the following conditions: The paper is not correctly loaded in the paper tray. You are printing on a special type of paper or other media. The paper has absorbed too much moisture from the surrounding air.
“No Paper Fed [MP Tray]” will occur when your machine is trying to print from the MP Tray but the paper isn`t loaded, or the paper can`t be pulled through.
“No Paper Fed [MP Tray]” means your printer is trying to print to the Multi-Purpose (MP) tray on the back of the machine, but doesn`t detect any paper in that tray. – If you aren`t trying to print to the MP tray, the application you are using may be trying to print to that tray.
Pinch the clip on the side paper guide, and then slide it to match the legal paper size. Pinch the front end paper guide and slide it inward to match the legal paper size. Fan the paper before loading paper in the tray. Load the new paper stack print side up.
Wet your paper with a moist sponge or a piece of cloth. As an alternative, dip the paper in water and place it on your table. The water makes the paper stick to your working surface.
Use the MP Tray for special print media, such as photo paper or envelopes. If the [Check Paper] setting is set to [On] and you set the paper in MP tray, a message appears on the LCD asking if you want to change the paper type and paper size.
Printing legal-size paper is relatively easy. All you need to do is change the printer preference settings to legal-size paper. For most printers in the U.S, letter size is the default printing option. However, you can still change the settings to legal-size paper when you need to use this format.
Article Talk. In geometry and topology, crumpling is the process whereby a sheet of paper or other two-dimensional manifold undergoes disordered deformation to yield a three-dimensional structure comprising a random network of ridges and facets with variable density.
It is this permanent line of tiny fractures that forms the crease. Because it is indelible, the paper is said to “remember” the crease”. Even ironing with a hot ironing will not get rid of the crease. It is much the same with metal foil, although in this case there are no fibres to fracture.
Tips. Sometimes the best way to remove the wrinkled look, is to place the wrinkled page flat on a photocopier and make a new copy. This one will not have wrinkles, and will be as good as new.
Zip Dry never ever wrinkles paper, including tissue and vellum. It is acid and lignin free, and will not harm photographs. It rubs away completely when wet, without leaving any sticky residue. Scrapbookers and card makers have voted Zip Dry their #1 adhesive for paper.
“No Paper MP” means the MP Tray is out of paper or the paper is not loaded correctly in the MP Tray.
On the front of the machine, open the MP tray and lower it gently. Pull out the MP tray support (1) and unfold the flap (2). Slide the MP tray paper guides to fit the width of the paper that you are using. If the paper guide on the right side has a lever, press it and slide the paper guide.
The media bypass tray is designed to process thicker printing media (compared to the main paper tray, which is designed specifically for standard sheets of paper) and to offer a straighter path through the printer by bypassing at least one set of rollers.
Use the bypass tray to use OHP transparencies and paper that cannot be loaded in the paper trays. The maximum number of sheets you can load at the same time depends on paper type. Do not stack paper over the limit mark. For the maximum number of sheets you can load, see Recommended Paper Sizes and Types.
The flag located right of the pick-up roller has a fixed position. If the flag becomes stuck or broken, it will produce a 60.02 tray lift error or a “LOAD PAPER” message.
To specify a tray within MS Word the user must: Click File and then Print. In the Print Dialogue click Page Setup. In the Page Setup window click on the Paper tab.
Press [Machine Features Settings] on the Settings screen. Press [Fax Settings] [Reception Settings] tab [Specify Tray for Lines]. Press [On], and press the line to specify. Select the tray to deliver the output paper, and then press [OK].
Open the Printers and Faxes window, right click on the printer, and choose “Properties.” There should be a “Printing Preferences” option there. Anything you set there becomes the default for all future printing.
On the [Paper] setting screen, tap the setting icon ( ) of the tray you want to change paper settings for. Tap [Custom Size] from the drop-down list of [Paper Size]. Specify the length and width of the paper. Tap [OK].
The legal page size is 8.5″ x 14″ (216mm x 356mm), as shown in the plan below.
On the Format menu, click Document > Page Setup. Select a paper size from the Paper Size list, and then click OK.
Wrinkled end papers are usually the result of one or more of the following: Too much glue. Using the wrong type of glue. Paper is too thin.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

My printer feeds through one piece of paper all the way and then a half piece of paper and stops. I pull out the paper to stop the paper jam and then it prints but sounds rough. After printing, it doesn't feed the paper all the way through.
ANSWER : And the first 2 sheets, the full and half sheet that go through first, are blank.

Read Full Q/A … :
Unknown Printer

Paper jam in tray 2 (but no paper pulled from tray) also M476DN models
ANSWER : Isopropyl alcohol is not recommended for rubber rollers. It dries out the rubber and hasten it’s cracking and breaking. It will do nothing to restore the grip. Those rollers are really hard to replace. It would be easy if that dumbass secondary menu really worked. None of the techs I’ve spoke to ever got into it. Everyone I know sends a print job and listens for the roller to rotate into position where you can pull it off.

Read Full Q/A … :
Unknown Printer

Tray 1 (upper tray) paper feed problem
ANSWER : There is no way of adjusting the distance of lift. Could be that the pickup roller is worn enough that it will pick up a sheet that is higher, but not one that is lower down. You can look at the end of the roller that first makes contact and see if it is worn smooth.

Read Full Q/A … :
Unknown Printer

hp 8600 pro when power on, paper jam message appear but there is no paper jam in the tray
ANSWER : Hp 8180 Photosmart All In One code keeps says paper jam and carriage jam when neither are jammed. I followed all the recommended things to do. I live in Raleigh NC any place to take this or any suggestion.

Read Full Q/A … :
Unknown Printer

Paper tray 3
ANSWER : What usually happens in this instance is that the access flap to the left of the pickup roller pops up. This blocks the tray from opening. The only way to fix it is to look in from the back of the tray with a flashlight and get something thin and long, maybe a wooden ruler? Reach in and push down on the flap until it locks in place. If you’re not sure what I’m referring to, you can pull out and look at tray 2 for guidance.

Read Full Q/A … :
Unknown Printer

Brother MFC-J6510DW extra paper tray.
ANSWER : There clearly was a similar problem couldn’t enter in to a ditch of benefit drawing up a strategy. A pal gave this http://put-call-options.com site to select an appropriate technique and I have chosen for themselves the optimum and successful naybolee. I hope I served you with your problem. Thanks for attention)))

Read Full Q/A … :
Unknown Printer

Paper tray
ANSWER : Printer is a HP 1320 laser jet

Read Full Q/A … :
Unknown Printer

Error message to load paper and push OK, but not out of paper
ANSWER : I assist the binary options for a long time, and only half this past year I decided to alter the strategy for a better, she called for help Bing and he gave me this web site http://bestoptionstrategies.net .Now I focus on the suitable technique for themselves, and things gone up. I think everybody else faced with this particular problem. I believe my estimation will soon be helpful to you.

Read Full Q/A … :
Unknown Printer