How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Streaking, smudging, black lines, and double images are all symptoms of a bad fuser. When you notice these printing defects and experience problems, such as paper jams or wrinkles, this is a good sign to replace the fuser kit.
The fuser unit must be replaced every 100,000 pages, usually along with the transfer belt and feed rollers as part of a maintenance kit. The error code 010-351 indicates that the fuser has reached 100,000 pages and should be replaced immediately. The printer will not operate until the fuser unit is replaced.
Design. The LaserWriter was the first major printer designed by Apple to use the new Snow White design language created by Frog Design.
The message `Fuser Error` or `Self-Diagnostic` means either the fuser has reached the maximum temperature allowed or there has been an error in detection of the correct temperature during specific times of the printing process.
The Fuser is the piece that fixes the toner on the paper. This, like any other consumable part, wears out with the regular use of prints, since it is one of the components that suffers the most due to its mechanical wear and overheating of its components, due to the high temperatures it must withstand.
A semiconductor diode laser is currently used in laser printers as the light source.
The laser printer was the first to be invented and was done so in 1969 by Gary Starkweather while working in the Xerox product development team. His idea was to use lasers to imprint an image onto a copier drum which would then be transferred onto paper. Hence, the name `Laser printer`.
Specifically, Gary Starkweather invented the laser printer in 1969 at the Xerox research lab in Webster, New York. Soon after, he transferred to Xerox Palo Alto Research Center (PARC) and developed a prototype for the Xerox 9700: our company`s first laser printer, which came to market in 1978.
Among the more common technical issues that may bring down a printer are disconnected cables, malfunctioning routers, and low ink levels. Moreover, software problems such as interrupted connections or incorrect settings in your system`s drivers can also cause your printer to show up as offline.
A high fuser temperature error has occurred. Note: A fuser error might occur because of inadequate power supply, inadequate line voltage, or a fuser problem.
Paper could also be jammed inside the fuser where it would not be visible. Remove the fuser to check for jammed paper inside.
The message “Fuser Kit Low” or “Fuser Kit Very Low” on your HP Color LaserJet M553 series printer is a warning that you have reached the recommended number of prints for your fuser assembly. (The fuser assembly is the consumable part in your printer which heats up and bonds toner to the paper.
The Fuser operates in the temperature range of 175 – 215o C (347-419o F).
A laser printer that can perform two-sided, or duplex, printing will have a fuser with two heated rollers. Both rollers in the fuser get hot and melt the toner powder onto both sides of the page at the same time. The two rollers inside a fuser work together to melt and fuse the text or image onto a sheet of paper.
Lasers produce a narrow beam of light in which all of the light waves have very similar wavelengths. The laser`s light waves travel together with their peaks all lined up, or in phase. This is why laser beams are very narrow, very bright, and can be focused into a very tiny spot.
Lasers are classified into 6 types based on the types of medium used in them, and they are: Solid-state lasers. Gas lasers. Liquid lasers.
Laser printers can print much faster than inkjet printers can. Most are equipped with high-capacity paper trays, so they can print more pages at a given time. They`re also built to handle the printing of thousands of pages per month without succumbing to wear-and-tear.
Color Laser Printer or Black & White Laser Printer
As print quality goes down over time, this will be a reason to replace the color printer. We find a black and white printer can sometimes last 10 years or more and most color laser printers are replaced every 3 to 5 years.
Laser printers, unlike inkjet printers, do not use ink cartridges. Instead laser printers use toner cartridges, so be sure to purchase accordingly depending on your printer. Toner is a fine dye power that is melted onto the paper.
While ink is standard in most conventional inkjet home printers, laser printers depend on toner and lasers for their output. Given that they`re based on their own unique technology, you`ll find that they also have their own unique advantages and disadvantages.
The fuser is a part of laser printers that bonds the toner and paper together using heat and pressure. Fusers need to be replaced every 75,000 – 300,000 pages depending on the printer model.
This error displays because the Fuser Unit cannot maintain a normal operating temperature. Power the printer off and then on. If the problem persists, contact Support for additional assistance as the Fuser Assembly may need to be replaced.
If you are experiencing a “50.7” fuser error, first turn the printer off and back on. Sometimes the error will temporarily go away with a reboot so you can print a few more pages, but usually the error reappears.