HP LaserJet P3005

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

52.00 ERROR

Verify that the scanner motor connector and the ribbon cable from the ECU are firmly seated on the laser/scanner assembly. 2. Verify that the scanner motor connector is firmly seated in connector J402 on the ECU. You might have to remove the main cooling fan to see this connection.

The HP LaserJet P3005 has print speeds of up to 35 ppm, 48 MB RAM, and a 500-sheet input tray.
The factory defaults include a TCP/IP address of either 169.254. x.x or 192.0. 0.192. Some print servers may show the TCP/IP address as 0.0.
Click the Start, Control Panel, Printers, and Faxes. Right-click the printer driver and select Properties. Click Ports, Add port, Standard TCP/IP port, New port, and click Next the TCP/IP printer port wizard to provide the IP Address of the printer. Click Next and Next again.
To change your printer IP address, type its current IP address into the address bar of a web browser. Then go to the Settings or Network page and change your printer`s network to a static/manual IP address. Finally, type in the new IP address.
Inkjet printers usually have a PPM rate of 3 to 13 PPM, while laserjet printers tend to run faster with rates between 12 and 20 PPM. Again, this is, just pages of black text. Color will print at a slower rate.
The best copier speed to keep pace with 40,000 monthly prints or copies is a 60 PPM copier. This speed of copier should suffice for most larger businesses. For businesses requiring upwards of 50,000-100,000 documents to be printed every month, an even faster multifunction printer may be necessary.
Select Start , then select Settings > Devices > Printers & scanners . Under Printers & scanners, find the printer, select it, and then select Remove device. After removing your printer, add it back by selecting Add a printer or scanner.
Restoring the factory-set defaults returns most of the settings to the factory defaults. It will not reset the page count, tray size, or language.
1. On the printer display home screen, select the “set up” button (it looks like a gear). 2. Select “settings” > “device settings” > “reset settings” > “reset all” > “OK” and then “Yes.”
To aid in your search, a list of the username and passwords for HP printers has been provided below. When in doubt, just use “admin” as both your username and your password.
Dynamic Host Configuration Protocol (DHCP) is a client/server protocol that automatically provides an Internet Protocol (IP) host with its IP address and other related configuration information such as the subnet mask and default gateway.
Recommended action. Turn the printer off, wait 15 seconds and turn the printer back on (using the power switch located on the back of the printer). The error code should not appear again.
Turn the printer off then back on. If the issue persists, turn the printer off, unplug the power cord and then wait at least three minutes before plugging the power cord back in and turning the printer back on. If the issue persists, ensure the product is running the latest firmware available from HP.com.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

HP Laserjet P3005 Hangs (with error 49.4C02)
ANSWER : Just change the data cable of printer. It will be solved.

Read Full Q/A … :

HP LaserJet P3005

Laser P3005 — What is the service mode code ??
ANSWER : You had been amazing with what you had given to us as you could be generating iTunes gift card code where you can easily get the music and videos of iTunes with the help of tricks and tool that we have for apple in app process. I can be also so giving you the homepage for codes and cards online.

Read Full Q/A … :

HP LaserJet P3005

evenly spaced horizontal lines on hp laserjet III printout
ANSWER : The lines would be a toner cartridge problem. Which paper tray? The MF tray or the optional paper cassette?

Read Full Q/A … :

HP LaserJet P3005

HP Laserjet 4250 – RFU LOAD ERROR
ANSWER : Italiano:

Read Full Q/A … :

HP LaserJet P3005

How to copy a card slot in HP laserjet 4250N
ANSWER : None that I know of, using a computer is likely your best option but I never attempted it.

Read Full Q/A … :

HP LaserJet P3005

What repair needs to be done for a "50 needs repair" message on an HP Laserjet IIIP?
ANSWER : I don’t know what you mean by good toner cartridges. They haven’t been built in about 10 years, so if they are new OEMs in the box, they are guaranteed to fail. The 50 error on that printer is mostly a burned out fuser lamp. This site was sold, so as you can see, there are no more kits available.

Read Full Q/A … :

HP LaserJet P3005

HP Laserjet 4200 50.2 Fuser error
ANSWER : if you are using a good fuser the next part to try would be low voltage power supply

Read Full Q/A … :

HP LaserJet P3005

LaserJet 4 won't Power Up
ANSWER : I haven’t seen that particular behavior on that model. It either works or it doesn’t. My first choice would be the power supply.

Read Full Q/A … :

HP LaserJet P3005