LaserJet 9000 Fuser Is It Worth $?

Streaking, smudging, black lines, and double images are all symptoms of a bad fuser. When you notice these printing defects and experience problems, such as paper jams or wrinkles, this is a good sign to replace the fuser kit.

Most fusers last between 50,000 and 200,000 pages, depending on the design. Smaller cheap printers tend to have short fuser lives, while fusers used in larger office printers tend to be long-lasting and easily replaced.

The Fuser is the piece that fixes the toner on the paper. This, like any other consumable part, wears out with the regular use of prints, since it is one of the components that suffers the most due to its mechanical wear and overheating of its components, due to the high temperatures it must withstand.

The fuser unit must be replaced every 100,000 pages, usually along with the transfer belt and feed rollers as part of a maintenance kit. The error code 010-351 indicates that the fuser has reached 100,000 pages and should be replaced immediately. The printer will not operate until the fuser unit is replaced.

Fuser Units

The coating wears off and causes the toner to not fuse properly. There are replacement rollers and sleeves on the market that you can replace and turn a non-functional fuser into a good working one. Rebuilding fuser assemblies is not a new thing.

Color Laser Printer or Black & White Laser Printer

As print quality goes down over time, this will be a reason to replace the color printer. We find a black and white printer can sometimes last 10 years or more and most color laser printers are replaced every 3 to 5 years.

Printing made easy with an HP Fuser Kit

It lets you print up to 150,000 pages of dynamic quality before you need to replace it.

The fuser unit is a periodic maintenance part and should be replaced to maintain optimum print quality and reliability and to prevent paper jams.

This error might display if the fuser temperature becomes too hot. Follow these steps to turn off the printer and allow the fuser to cool before printing again. Press the Power button to turn off the printer. Disconnect the power cord from the rear of the printer.

The message “Fuser Kit Low” or “Fuser Kit Very Low” on your HP Color LaserJet M553 series printer is a warning that you have reached the recommended number of prints for your fuser assembly. (The fuser assembly is the consumable part in your printer which heats up and bonds toner to the paper.

A fuser unit is a pair of heated rollers within the printer that fuses the toner onto the paper being printed on. Toner particles are pulled to the paper to create the desired text and images as the paper passes the imaging drum.

The fuser assembly is responsible for fusing the toner onto the paper. The fuser assembly consists of two rollers, a heat roller and a pressure roller. When the pressure roller becomes worn, it will become difficult to turn. When the fuser assembly can`t turn, it will cause a paper jam.

The message “Fuser Kit Low” or “Fuser Kit Very Low” on your HP Color LaserJet M553 series printer is a warning that you have reached the recommended number of prints for your fuser assembly. (The fuser assembly is the consumable part in your printer which heats up and bonds toner to the paper.

The fuser unit is a consumable item that requires periodic replacement. After you have printed approximately 100,000 pages (letter or A4 size paper), the message `Replace Fuser` will appear on the LCD display. NOTE: The actual number of printed pages will vary depending on the print jobs and paper you use.

Your printer monitors the life of your fuser. When the fuser reaches the end of its life, the printer displays 80 Fuser Exhausted. This message indicates it is time for you to replace the fuser. For best print quality, make sure you replace the fuser when the printer displays 80 Fuser Life Warning.

The fuser unit is a consumable item that requires periodic replacement. After you have printed approximately 100,000 pages (letter or A4 size paper), the message `Replace Fuser` will appear on the LCD display. NOTE: The actual number of printed pages will vary depending on the print jobs and paper you use.

Your printer monitors the life of your fuser. When the fuser reaches the end of its life, the printer displays 80 Fuser Exhausted. This message indicates it is time for you to replace the fuser. For best print quality, make sure you replace the fuser when the printer displays 80 Fuser Life Warning.