How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
If the error message, Unknown device appears, this can indicate that there is not adequate power and the PC can not identify the printer correctly. Verify that there are no extension cables and that the power cable is no longer than five meters. Reseat the power cables.
If your printer`s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn`t open and the paper isn`t jammed.
This issue can be caused if any of the following situations exist: The currently loaded USB driver has become unstable or corrupt. Your PC requires an update for issues that may conflict with a USB external hard drive and Windows. Windows may be missing other important updates hardware or software issues.
The printer is either low in toner, the density is set too low, or the Economode may be turned on. Remove the toner cartridge and shake it. This will redistribute the toner and often will temporarily solve the problem. However, this usually indicates it is time to install a new cartridge.
Select Start , then select Settings > Devices > Printers & scanners . Scroll down to Related Settings and select Print server properties. Select the Drivers tab, and see if your printer is listed. If it is, you`re all set.
In the Windows Settings search box, type “Printer,” then select Add a printer or scanner. In the Printers & scanners page, select Add a printer or scanner. Select your printer when you see it appear, then follow any additional instructions to install the printer driver.
Open the start menu and select Control Panel > Administrative Tools > and choose the Services icon. Locate the Print Spooler service and right-click. Then select the option to “Stop” the service.
If you see an “unknown accessory detected near you” message (or similar), it means there`s an item compatible with the Find My network that might be traveling with you. If so, its owner may be able to see your location. You should look to see if something you`re borrowing has such a device attached.
Updated: 10/11/2021 by Computer Hope. An unknown device is a device name listed in Device Manager that Windows cannot identify or doesn`t have the appropriate drivers to be recognized.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
49 error on LaserJet 1536dnf
ANSWER : How to rectify this problem
HP Laserjet 4100 Error (13.1)
ANSWER : I am pretty late to the party for this discussion but I am incredibly thankful to the person that posted this “fix” that I can barely imagine it. My 4100 had developed the dreaded paper jam described above and I had no idea what was causing it. I replaced a number of rollers only to have the same problem re-occur with no solution in sight.
Error Code 51.1 says Printer Error No Kidding.lol
ANSWER : Sometimes turning off and on will allow you to print a few pages. The error is a beam detect error. The only real fix is to replace the laser scanner unit. Could be a loose connector on the scanner or DC controller from the scanner. That’s unlikely. You could try the only other free fix which is to open the scanner assy. and clean all the mirrors inside. The dust could obstruct the laser beam enough to cause the detect error.
HP Laserjet 4250 – RFU LOAD ERROR
ANSWER : Italiano:
HP Laserjet M3035xs error 13.17.00
ANSWER : If the misstep thinks of no interface join connected with the unit, pay for my research paper then most times the issue is the hard circle and it ought to be supplanted.
HP LaserJet 49 Error Troubleshooting
ANSWER : One must give a chance to 25dollarsupport its a Fix $ price Computer Tech support company, which is the best option in present crowded market. Quite dependable and cost effective..
HP Laserjet 4200 50.2 Fuser error
ANSWER : if you are using a good fuser the next part to try would be low voltage power supply
4250N Laserjet 49.FF04 Error
ANSWER : My customer’s HP 4250 with 49.FF09