Laserjet 5si

The main cause of the issue is the absence of the printer driver software. Driver software that are incompatible with the system and also software that lack updates are other reasons that cause the printer error 5 to occur. Also, driver software for a particular device should be configured after its installation.

An Er/04, Er/05, or Er/06 error message indicates paper is jammed inside the printer. To resolve the issue, find and clear the printer of any jammed paper, or reset the printer if the printer has no jammed paper. For detailed troubleshooting, go to Paper Jam Error.

An Er/02 error message indicates that the toner cartridge door is open or not closed completely. To resolve the error, open the toner cartridge door, and then close it completely.

Error Code 5 is a Windows error code that appears when the user does not have sufficient permission to access the requested file or location.

This error can sometimes occur even when you`re not trying to print, or if you don`t have a printer installed. To overcome this issue, the first thing to check is to make sure you have the latest printer driver installed for your printer.

Common causes include dust and grime, worn rollers, or inappropriately weighted paper. Prevent paper jams by regularly cleaning your printer and replacing parts as needed. Check the weight of paper that your printer is rated for as well. The printed product is faded.

HP Printer Error E4 means that the FINE cartridge in your printer device is not installed appropriately. To move out the cartridges, you will require to push the output tray back in before opening the cover.

The only permanent solution to the 0x0000011B error is to install the latest Windows Update which fixes the issue. For now, you can try uninstalling the update or disabling the problematic security feature from the Registry. Other workarounds include installing the printer manually.

An Er/03 error message indicates the printer failed to pick a sheet of paper to print. Remove the stack of paper from the tray and check the condition of the paper. Reload the paper, and then try to print, copy or scan. For detailed troubleshooting, go to Printer Does Not Pick Paper.

`Error 2` displays

An E2 error occurs when the printer attempts to print a single-page or multi-page print job, and the paper length selected in the print settings does not match the length of the loaded paper. The first page prints with errors.

This indicates a paper jam in the Input tray area. The Attention light blinks, the Paper light is on , and the control panel character display alternates between Er and 05. This indicates a paper jam in the Imaging drum area.

The Error Code 6 means that there was an issue communicating with the Google Play app on the phone (various possible reasons). 1) Reboot the device and try the purchase again.

This indicates a paper jam in the Input tray area. The Attention light blinks, the Paper light is on , and the control panel character display alternates between Er and 05. This indicates a paper jam in the Imaging drum area.

Recommended action. Turn the printer off, wait 15 seconds and turn the printer back on (using the power switch located on the back of the printer). The error code should not appear again.

Turn off the HP printer and unplug it from the power source. Also, shut down your computer and unplug any external devices. Wait for a few minutes and then plug in the printer and turn it back on. Finally, turn on your computer and check if the error state has been resolved.