Laserjet 4100 fuser long-term fix

Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Streaking, smudging, black lines, and double images are all symptoms of a bad fuser. When you notice these printing defects and experience problems, such as paper jams or wrinkles, this is a good sign to replace the fuser kit.

The Fuser is the piece that fixes the toner on the paper. This, like any other consumable part, wears out with the regular use of prints, since it is one of the components that suffers the most due to its mechanical wear and overheating of its components, due to the high temperatures it must withstand.

The fuser unit is a vital component of laser printers. Most fusers last between 50,000 and 200,000 pages, depending on the design.

The fuser unit must be replaced every 100,000 pages, usually along with the transfer belt and feed rollers as part of a maintenance kit. The error code 010-351 indicates that the fuser has reached 100,000 pages and should be replaced immediately. The printer will not operate until the fuser unit is replaced.

Fuser Units

The coating wears off and causes the toner to not fuse properly. There are replacement rollers and sleeves on the market that you can replace and turn a non-functional fuser into a good working one. Rebuilding fuser assemblies is not a new thing.

The message “Fuser Kit Low” or “Fuser Kit Very Low” on your HP Color LaserJet M553 series printer is a warning that you have reached the recommended number of prints for your fuser assembly. (The fuser assembly is the consumable part in your printer which heats up and bonds toner to the paper.

Your printer monitors the life of your fuser. When the fuser reaches the end of its life, the printer displays 80 Fuser Exhausted. This message indicates it is time for you to replace the fuser. For best print quality, make sure you replace the fuser when the printer displays 80 Fuser Life Warning.

In this case, it is recommended that you replace the fuser unit with a new one. The life of the fuser unit when printing A4 size paper is approximately 50,000 pages.

What`s the average lifespan of a printer? The average lifespan of a printer is around 3-5 years. With proper upkeep and maintenance, some printers can last longer, but eventually your machine will need an upgrade.

As print quality goes down over time, this will be a reason to replace the color printer. We find a black and white printer can sometimes last 10 years or more and most color laser printers are replaced every 3 to 5 years.

For healthier print heads and more efficient ink consumption, however, it`s better to leave your printer on. Constantly switching your printer off and on will decrease your printer`s lifespan, so try to keep the off/on to a minimum.

Fuser kits replace the heating element in Laser printers that fuses toner onto paper. These elements wear out from normal use, and many printers need a new fuser every 60,000 pages.

The biggest difference lies in the name, as they tend to include all of the same parts. A maintenance kit should include a new fuser assembly, and a fuser kit should include all the necessary maintenance parts.

Place your old fuser kit in a safe plastic bag so that any excess toner on it doesn`t leak out and stain anything. Find the location of your local Staples store by looking through your local telephone book or going to the Staples website. Take your used fuser kit to any checkout person at your Staples store.

The following are the top reasons why paper jams occur:

unsupported paper/media is used. incorrect paper settings in the tray and/or the print driver. paper loaded incorrectly and/or paper edge guides not adjusted properly in the tray.

Parts that may be included in a maintenance kit are the fuser assembly, transfer roller, pickup rollers, separation pads, corona assembly, fan assembly, cleaning cloths and gloves. The fuser assembly is a pair of rollers that fuse the toner into the fibers of the paper.

The Fuser operates in the temperature range of 175 – 215^o C (347-419^o F). Temperature will vary depending on the type of media selected.

The fuser unit is a consumable item that requires periodic replacement. After you have printed approximately 100,000 pages (letter or A4 size paper), the message `Replace Fuser` will appear on the LCD display. NOTE: The actual number of printed pages will vary depending on the print jobs and paper you use.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

HP Laserjet 4100 Error (13.1)

ANSWER : I am pretty late to the party for this discussion but I am incredibly thankful to the person that posted this “fix” that I can barely imagine it. My 4100 had developed the dreaded paper jam described above and I had no idea what was causing it. I replaced a number of rollers only to have the same problem re-occur with no solution in sight.

Read Full Q/A … :
Unknown Printer

HP Laserjet 4200 50.2 Fuser error

ANSWER : if you are using a good fuser the next part to try would be low voltage power supply

Read Full Q/A … :
Unknown Printer

HP laserjet 3100 multiple page feed fixed!

ANSWER : Can you tell me what kit you are referring to because I have the exact problem with my 3100 printer?

Read Full Q/A … :
Unknown Printer

How to copy a card slot in HP laserjet 4250N

ANSWER : None that I know of, using a computer is likely your best option but I never attempted it.

Read Full Q/A … :
Unknown Printer

HP Laserjet 4250 – RFU LOAD ERROR

ANSWER : Italiano:

Read Full Q/A … :
Unknown Printer

HP Laserjet M3035xs RFU Upgrade

ANSWER : There’s no way.

Read Full Q/A … :
Unknown Printer

LaserJet 4 won't Power Up

ANSWER : I haven’t seen that particular behavior on that model. It either works or it doesn’t. My first choice would be the power supply.

Read Full Q/A … :
Unknown Printer

HP 4250 13.06.00 Fuser output paper stop !

ANSWER : pick up solenoid

Read Full Q/A … :
Unknown Printer