How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Check Cables and Printer USB Ports
Check all cable connections (including the power cord) on the printer side. If the printer does have power and you`ve properly connected the communication cable, but the printer is still not recognized, try switching to a different USB port on the PC.
During a print job, the printer stops feeding pages, an E4 error displays and the Resume light blinks. This indicates that paper might be jammed inside the printer.
Make sure your Wi-Fi network and printer setup meet connection requirements. Restart the printer and the computer or mobile device to clear possible error conditions. Make sure the printer is not connected to a computer with a USB cable.
Open the start menu and select Control Panel > Administrative Tools > and choose the Services icon. Locate the Print Spooler service and right-click. Then select the option to “Stop” the service.
Ghost prints happen when the drum or fuser unit within your printer become faulty. Because a fault with this element won`t heat the particles of the toner to a high enough temperature, the marks being made on the paper are much lighter in colour and appear more faded than typical documents.
Status unknown means a circumstance where samples were scheduled to be taken by the regional water quality control plant and were not, samples were taken but not yet analyzed by the report due date or where a new discharger has yet to be sampled.
Go to Settings > System > Troubleshoot > Other troubleshooters. Locate the Printer troubleshooter, and click on the Run button. Once the wizard completes the process, reconnect the printer and check if the issue is resolved.
You can fix error code 4 in CoD Warzone by ensuring a stable connection. For example, a slow or unstable internet connection can sometimes cause CoD Warzone to crash with error code 4. Slow Wi-Fi, overloaded servers, or several other issues can cause this.
HP Printer Error E4 means that the FINE cartridge in your printer device is not installed appropriately. To move out the cartridges, you will require to push the output tray back in before opening the cover.
Start by checking your hardware
If you`re using a wired printer, make sure that the printer cable is properly connected from the printer to your PC. For wireless printers, check the wireless connection. Make sure the printer`s wireless option is turned on and available.
The printer is either low in toner, the density is set too low, or the Economode may be turned on. Remove the toner cartridge and shake it. This will redistribute the toner and often will temporarily solve the problem. However, this usually indicates it is time to install a new cartridge.
Click on Device Manager from the context menu. In Device Manager, click on View and select Show hidden devices. Next, expand the Printers section to view your printer.
Open Settings -> Devices -> Printers and Scanners (or run a quick access URI command: ms-settings:printers ); Select a printer you want to remove and click Remove Device; Confirm the printer removal.
Select the Start button, then select Settings > Devices > Printers & scanners. Under Add printers & scanners, select Add a printer or scanner. Choose the printer you want, and then select Add Device. If you don`t see the printer you want, select The printer that I want isn`t listed.
Make sure that both ends of the USB cable are correctly inserted into the computer and the printer. Try disconnecting and reconnecting the USB cable at both ends. Disconnect the printer and the computer and reconnect them. Try another USB port if available.