Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Some Kyocera printers can be reset by turning the machine power switch off and back on while some others activate “partial operation control” disabling the defective part/area of the machine (paper feed cassette, stapler, document processor etc).
Check your local area network connections and confirm that your mobile device is wirelessly connected to the network. Check that your mobile device is accessing the same subnet address range as that of your printing device. Make sure WSD is enabled on the printing device or in Command Center RX.
If your printer`s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn`t open and the paper isn`t jammed.
Remove and Re-Add Your Printer in Windows

If this happens, go to Settings > Devices > Printers & Scanners, select your printer, and remove it. Then click Add a Printer or Scanner to re-add it to the device list.

Make sure your router is on and connected to the internet. If you have another device on the same router, make sure it can connect to the internet. If the router is not connected to the internet, contact your network service provider. Check the printer connection to the router.
The most common reason is an unreliable connection between the printer and the computer. You might also have a paper jam, out-of-date drivers or a print spooler service with bad data.
Open the printer`s web page and Sign in as Administrator. On the General tab select Reset Factory Settings in the menu.
Select Start > Settings . Go to Devices > Printers & scanners > select a printer > Manage. Then select Set as default. If you don`t see the Set as default option, the Let Windows manage my default printer option may be selected.
a misprint or misspelling in a text.
Fixing the 0x0000011b Printing Error on Windows

This error has largely affected Windows 10 computers. To fix the issue, try to install all the pending Windows updates that may include a hotfix. You can also add the printer manually to a local port or edit the registry entry to disable the problematic setting.

Fixing the 0x0000011b Printing Error on Windows

This error has largely affected Windows 10 computers. To fix the issue, try to install all the pending Windows updates that may include a hotfix. You can also add the printer manually to a local port or edit the registry entry to disable the problematic setting.

1. Paper Jams. Paper jams are a common problem for printers, resulting in time-consuming and frustrating delays. It can occur when loose sheets of paper get stuck in the rollers or feeding mechanism of the printer.
1: Check Printer Power, Cables, and Paper

Check that the correct paper is properly loaded into the printer and is not jammed. Replacing damaged cables, plugging in loose or disconnected cables, and fixing paper jams as necessary may resolve the issue.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Kyocera M6026cdn – Somewhat random white blotches on printed page
ANSWER : Looking at that photo, it’s definitely nothing to do with electronics, high voltage or the laser assembly. I noticed you are using compatibles. I’ve seen a lot of those bad right out of the box.

Read Full Q/A … :
Unknown Printer

Kyocera Firmware
ANSWER : Hi

Read Full Q/A … :
Unknown Printer