Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

If you are using a USB connection, make sure that the cable is properly connected. If your printer is connected via wireless network, verify that the wireless connection is working. If all seems fine, restart the printer and try again. If the Konica printer is offline, the error can be caused by faulty printer drivers.
If your printer`s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn`t open and the paper isn`t jammed.
To check the printer name, select [Administrator Setting] – [Network Setting] – [NIC Setting] – [Bonjour Setting] of this machine. In the default setting, the contents enclosed in parentheses ( ) suffixed in [Bonjour Name] correspond to the low-order three bytes of the MAC address.
1: Check Printer Power, Cables, and Paper

Check that the correct paper is properly loaded into the printer and is not jammed. Replacing damaged cables, plugging in loose or disconnected cables, and fixing paper jams as necessary may resolve the issue.

Unplug and restart your printer

Sometimes power-cycling your printer can resolve the issue. Turn off your printer and unplug it, wait 30 seconds, plug your printer back in, and then turn the printer back on.

To connect your phone via the Default Print Service, go into the phone`s settings, search for “printing”, then select it from the results. Next, tap Printing in the list of Connection preferences, select Default Print Service and turn it on. A list of compatible printers on the network should appear.
a misprint or misspelling in a text.
The most common reason is an unreliable connection between the printer and the computer. You might also have a paper jam, out-of-date drivers or a print spooler service with bad data.
Most printers will stop working when they`re out of paper, ink or toner, or if the unit detects an issue with the ink or toner cartridge. When this occurs, you might receive an error message or notice blinking green or amber lights on your printer.
Some of the most common printer problems that most of us have experienced include paper jamming, slow printing, uneven printing, and wrong colour output. If you use your printer frequently, we know how annoying it can be to have persisting problems with the printer.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Minolta Pageworks L printer
ANSWER : I’m not familiar with that model. I do have to say that 8 years in storage will have detrimental results. I have never seen any printer request a transfer roller change. They do come as part of maintenance kits in HP series printers. Transfer rollers really don’t wear out. Worst that happens is they get toner on them. Their function is to charge the back of the paper and pull the toner down on it. That being said, you probably will have a host of other issues. Any drum wiper blade will have deteriorated necessitating replacement of the drums. The fuser assy. will probably have suffered damage to the pressure roller from sitting in the same position without rotation for 8 years. Depending on storage conditions, the toners might have suffered as well. In my opinion, it will cost you more to fix it than replace it. Test print procedure is Chapter 3, item 5 in the user manual http://printer.konicaminolta.net/drivers/manuals/pageworks/cpw.pdf

Read Full Q/A … :
Unknown Printer

I GOT ERROR – FATAL ERR. 15H – WHAT TO DO PLEASE
ANSWER : Watch this video. It will show you how to fix the error.

Read Full Q/A … :
Unknown Printer

Paper Jam when printing color.
ANSWER : I have also this problem. I just bought a new color printer. Installing was fine, and had printed one page of a print test on the first setup, but when it started to print the second page, the paper jams. I am a tutor at DissertationHelp.uk and I also want to solution in this problem.

Read Full Q/A … :
Unknown Printer

scane cutting problem
ANSWER : my konica minolta bizhub 600 give ne a scane cutting problem how i m solve this problem

Read Full Q/A … :
Unknown Printer

Paper Jams
ANSWER : Not familiar with that printer, but I will tell you about models I am familiar with. On those, the backstop of the tray which fits against the back of the paper signals the size of the page to the printer. It does so by moving some arms on the side in and out so they contact 1 to 3 switches in the printer and that tells the printer what size. Basically, that is the problem you are having, the printer thinks that a different size of paper is in the tray than what you are telling the printer to use through the software.

Read Full Q/A … :
Unknown Printer

IN my matchin 224e developer problem
ANSWER : My gmail add— [email protected]

Read Full Q/A … :
Unknown Printer

blue line on printing
ANSWER : Replace the cyan toner cartridge.

Read Full Q/A … :
Unknown Printer

Cyan will not print
ANSWER : Um, nevermind. the imaging unit came unplugged when the toner was changed. It is now printing cyan.

Read Full Q/A … :
Unknown Printer