Epson Stylus C60

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

The Cause of Clogs

Printheads clog because nozzles get blocked by either air or ink. Clogs usually happen when: You keep printing with depleted ink cartridges. Using empty ink cartridges can result in air bubbles that can clog your cartridge and/or printhead.

If you want to continue printing, press the Pause button. Non-Epson genuine ink cartridge is installed. Press the Pause button for 3 seconds to cancel printing. If you want to continue printing, press the Pause button.
1: Check Printer Power, Cables, and Paper

Check that the correct paper is properly loaded into the printer and is not jammed. Replacing damaged cables, plugging in loose or disconnected cables, and fixing paper jams as necessary may resolve the issue.

Open the Applications folder, open the EPSON Printer Utility3, select your Epson printer, and click OK. Then select Head Cleaning. 3. Follow the on-screen instructions to start the cleaning cycle, which lasts around 1 minute.
Small fragments of sticky label material commonly get torn off and stuck within your printer, collecting dust and causing a jam. Shut the printer off, get a flashlight, and try to see inside. Make sure no label fragments have jammed up your printer before proceeding.
Do a hard reset on your printer. To do this you just need to turn off your printer, unplug for a few minutes and then plug the printer again. If that still doesn`t work, try turning the printer and your computer off, and then start it back up again. Try uninstalling and then reinstalling your printer driver.
Improperly Loading Paper into the Device

Loading paper that is stuck together, frayed, curled or bent can cause a jam. Overloading the paper tray, loading different thicknesses of paper in the tray or using paper that isn`t appropriate for your particular printer can all result in a jammed printer.

It is usually on the top right-hand side of your printer, near any digital display screen that the printer may have, and where the button used to turn the computer on and off is also located. Find the button marked Pause/Reset on the row of buttons on the control panel.
Some of the most common printer problems that most of us have experienced include paper jamming, slow printing, uneven printing, and wrong colour output. If you use your printer frequently, we know how annoying it can be to have persisting problems with the printer.
The Power Cleaning utility allows you to replace all of the ink inside the ink tubes. In the following situations, you may need to use this feature to improve the print quality. You printed or performed head cleaning when the ink levels were too low to be seen in the ink tank windows.
After a lot of use, your inkjet printer`s printhead nozzles may become blocked with dried ink. The first thing you can do is initiate a cleaning cycle and add drops of 91% isopropyl alcohol if needed. If the steps above does not work, you may need to manually clean the printhead out of the printer.
Turn off the printer and unplug the power cord from the printer and the electrical outlet. Unplug all other cables from the printer. Pull out the paper cassette, and carefully stand the printer on its right side. Carefully remove the jammed paper.
A paper jam is when paper or other printed material gets stuck or lodged in a printer and cannot eject.
Did you know most copier paper jams are caused by the paper itself? Misaligned paper. When a stack of paper isn`t aligned properly in the machine, it often causes a paper jam issue. When adding a ream of paper, always fan the paper, load carefully and avoid overstuffing the tray.
This error occurs if the firmware update procedure is interrupted, e.g. an accidental powering off of the product, cables being removed, or the installation being canceled. To recover from this error, Epson will instruct customers to update their printers with the latest version of the firmware.
The reset key is a single use key and once used cannot be used again. All EPSON printers have inbuilt counters that count up the number of pages a printer produces, the number of head cleans executed and various other attributes. Once a critical level is reached the printer will enter its service mode.
While troubleshooting your Epson printer, you may need to completely reset the device. A factory reset will return your printer to its out of the box settings.
Document Jam means the document in the automatic document feeder (ADF) was loaded or fed improperly or was too long. The error message may be followed by Clear the scanner jam.
Open the printer`s web page and Sign in as Administrator. On the General tab select Reset Factory Settings in the menu.
Restoring the factory-set defaults returns most of the settings to the factory defaults. It will not reset the page count, tray size, or language.
An HP ink system error can also be caused by low or empty ink or toner cartridges. If you spot an “Ink System Failure” message before discovering the error, then replace the ink or toner cartridge to resolve the problem.
Step one: Perform a power reset

Unplug the power cord from the wall outlet. Wait at least 15 seconds. Plug the power cord back into the wall outlet. Reconnect the power cord to the rear of the product.

The Cause of Clogs

Printheads clog because nozzles get blocked by either air or ink. Clogs usually happen when: You keep printing with depleted ink cartridges. Using empty ink cartridges can result in air bubbles that can clog your cartridge and/or printhead.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Printer jammed, after jam clearance there is an error message
ANSWER : I am looking for steps to isolate this issue. I don’t suspect the formatter.

Read Full Q/A … :

Epson Stylus C60

newly installed printer…can scan but cant be set as a default printer???
ANSWER : ITS AN EPSON L210…

Read Full Q/A … :

Epson Stylus C60

Paper Jam and carriage jam code when nothing is jammed
ANSWER : Did you try cleaning the encoder strip that runs through the cartridge assy.? Use Window Cleaner on a paper towel. Also, check inside on the right. I’ve seen a lot of times where there is a folded up scrap of paper that stops the carriage from going all the way to the right.

Read Full Q/A … :

Epson Stylus C60

PRINTER MX 320 CANON ALL IN ONE PRINTER
ANSWER : Probably a worn feed roller. You can try cleaning it with a damp rag as it might just be covered with paper dust.

Read Full Q/A … :

Epson Stylus C60

Difference Between Laser Printer and InkJet Printer
ANSWER : Laser uses toner which is a powder that gets melted onto the page. Inkjet uses ink that gets squirted onto the page.

Read Full Q/A … :

Epson Stylus C60

P2055dn Duplex Jam – Jam in Output Bin
ANSWER : I have same problem on duplex of 2nd page. Paper stops just behind Tray 1 pickup roller. Noted there is a small black 1/2″ lever tab behind the lower rear jam door. Noting that when printer jams trying to finish 2nd side, the lever is down ??? No answer, I know, just observation & looking for mention of this by someone. Going to try and find a black or white sensor which may be out of position.

Read Full Q/A … :

Epson Stylus C60

epson printer problems
ANSWER : My Printer Has A Internal Erro

Read Full Q/A … :

Epson Stylus C60

HP Laserjet printer page counter backward move
ANSWER : On all HP laserjet printers if you power them off the page count will decrease back to the nearest 10. For example, if the page reading is 123,799 and you power it off, the page count will go back to 123,790.

Read Full Q/A … :

Epson Stylus C60