Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

According to Canon, Error 06 indicates a fault of the sensor cleaning module.
The Error Code 6 means that there was an issue communicating with the Google Play app on the phone (various possible reasons). 1) Reboot the device and try the purchase again.
There are several reasons for Error 6000 to appear, including a paper jam, an improperly seated ink tank, and more. Paper is jammed or there is an object inside the printer. The printer needs to be reset. Press the Power button to turn off the printer.
An Er/04, Er/05, or Er/06 error message indicates a paper jam. Find and clear the printer of any jammed paper, or reset the printer if the printer has no jammed paper.
Run-time error 6 can also be caused by a bad client installation. If the error is not caused by dual (multiple) monitors, completely uninstall and re-install the clients.
If you command printing when the tray cannot open, the 6000 error occurs. In such a case, remove any physical objects that prevent the tray from opening and turn OFF the printer. Then, turn ON the printer and command printing again. [ The tray cannot open due to the obstructions. ]
With the printer powered on, select Setup . Select Device settings . Scroll to the bottom of the menu list and select Reset settings.
E, 1, 6 (LED display)

The ink has run out. Replace the ink cartridge and close the paper output cover.

Solution. If the orange light is lit and the E03 support code displays on your printer, there is a paper jam. Support codes 1300, 1303, and 1304 also indicate a paper jam.
E, 1, 6 (LED display)

The ink has run out. Replace the ink cartridge and close the paper output cover.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Error message pump motor stalled
ANSWER : Hy,

Read Full Q/A … :
Unknown Printer

Error Code 51.1 says Printer Error No Kidding.lol
ANSWER : Sometimes turning off and on will allow you to print a few pages. The error is a beam detect error. The only real fix is to replace the laser scanner unit. Could be a loose connector on the scanner or DC controller from the scanner. That’s unlikely. You could try the only other free fix which is to open the scanner assy. and clean all the mirrors inside. The dust could obstruct the laser beam enough to cause the detect error.

Read Full Q/A … :
Unknown Printer

message error: ADF paper jam
ANSWER : There is a thin plastic arm that the paper pushes on. It is spring loaded. If it doesn’t return and unblock the sensor after the paper passes it, you get the paper jam warning. I’m guessing that is the spring you are referring to.

Read Full Q/A … :
Unknown Printer

error message
ANSWER : Search it on google

Read Full Q/A … :
Unknown Printer

Error Message 4F on MFC 210C
ANSWER : Basically this kind of error caused by loss of voltage on print head. If this is the case then I suggest to buy a new printer rather than replace print head. Print head might be too costly.

Read Full Q/A … :
Unknown Printer

Error message reads remove and check right cartridge
ANSWER : You can try cleaning the contacts on the back of the cartridge and the ones that they contact in the printer. Other than that, you have to replace the cartridge. I once had one that did the same thing. I swapped the cartridge with another printer of the same model and both printers worked fine. I swapped them back and the original printer got the same error. The other printer had no problem with either cartridge. I swapped them back and left them that way.

Read Full Q/A … :
Unknown Printer

Error message to load paper and push OK, but not out of paper
ANSWER : I assist the binary options for a long time, and only half this past year I decided to alter the strategy for a better, she called for help Bing and he gave me this web site http://bestoptionstrategies.net .Now I focus on the suitable technique for themselves, and things gone up. I think everybody else faced with this particular problem. I believe my estimation will soon be helpful to you.

Read Full Q/A … :
Unknown Printer

Error Message
ANSWER : Are you sure that is SO2? HPs don’t give a code like that, maybe 50.2? which is a fuser error and replacing the fuser usually clears that if that is the code you’re getting.

Read Full Q/A … :
Unknown Printer