Canon Pixma IP4300
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
– The printer driver may not be installed correctly. Uninstall and re-install the printer driver. – Make sure that there is a direct connection between the printer and USB port of the computer. Reboot the computer with the printer`s USB cable unattached and reconnect the cable once the computer has restarted.
Almost all printer USB cables are universal. They usually have a USB Type-A connector on one end and a USB Type-B connector in another end. This is because most computers have a Type-A port and printers have a Type-B port.
Connect your printer via a USB cable
Simply plug one end of the cable into the USB port on the Canon printer and the other into the USB port on your computer. Then, plug in the power cable and turn on the printer.
The USB port is located on the rear of the machine.
Troubleshoot the printer USB connection
Check the USB cable for damage and recommended length, and then restart your printer and computer. Turn off the printer and the computer. Disconnect the USB cable from the computer and printer, and then inspect the cable.
Please use a USB cable equipped with a Micro-B plug for connecting to the camera and a Type-A plug for connecting to the computer.
Most computer USB ports supply 5V of electricity with a maximum current of 0.5A.
For a printer connected to the computer via USB, the Port should be set to USB Virtual Printer Port (such as USB001, USB002). For a printer connected to the computer via Parallel, the Port should be set to LPT1 (or LPT2, LPT3 if you have more than one Parallel interface port on your computer).
With the device switched on navigate to the `set up` menu then select `Wireless LAN set up`. Then choose your wireless access point or wireless router from the list, enter your password then press `end set up`. One the flashing blue wireless light goes solid blue, you`re connected.
Can I charge my Canon camera with a USB? Yes! the camera`s battery may be charged via a USB cable. Charge the camera with the provided battery by inserting it. The battery can be charged using a computer or a small power converter.
It`s a message from the web server that something went wrong. In some cases it could be a mistake you made, but often, it`s the site`s fault. Each type of error has an HTTP error code dedicated to it.
Simply turn the printer off with the power button on the printer. Once turned off, disconnect the printer`s power cord from the back of the printer. Wait approximately 30 seconds before you reconnect it. Once reconnected, use the printer`s power button to turn the printer back on.
Check6 Make sure wireless signal is strong. Monitor signal strength and move printer and wireless router as necessary. Place the printer and wireless router where there are no obstacles between them. Wireless communication between different rooms or floors is generally poor.
If you connect the printer to your computer via a USB cable, check whether the cable is properly connected. If it isn`t, re-plug it and make sure they are properly seated into the ports on both your printer and your computer. Try another USB port on your computer in case the one you previously used is broken.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
HP Colour laserjet 2550n printer Tray2 issues
ANSWER : Ensure that the printer is turned on and in the Ready state.
Read Full Q/A … :
Canon Pixma IP4300
feed issue
ANSWER : Haven’t seen this issue on that model. Solenoids never go bad. Every solenoid HP has ever used has this sponge to dampen the clicking noise. The sponge will disintegrate from heat and use and then become sticky. This causes the pickup roller release plate to stick and allow the roller to rotate continuously. All you have to do is scrape off the goo and replace with thin sticky backed felt. I’ve fixed thousands of them this way.
Read Full Q/A … :
Canon Pixma IP4300
issue with paper
ANSWER : the printer in question is a epson xp310, thank you
Read Full Q/A … :
Canon Pixma IP4300
canon BJC50 USB connection
ANSWER : Yes. I have two PCs with Windows 10. PC with Intel I5 processor I used the driver Epson 2550c and USB002 port and it worked nice. The two on a laptop with Windows 10 that I used the same 2550c drive, but the door was USB001.
Read Full Q/A … :
Canon Pixma IP4300
Printer having issues detecting paper
ANSWER : There’s only the one sensor in the printer that is just before it gets under the cartridge path. Once the paper hits that sensor, the printer assumes that it is ready to get print on it and prints until the job is done, whether the paper moves or not. If it doesn’t hit the sensor or doesn’t clear it after printing, then the printer signals a paper jam. I’ve never seen an inkjet where the transport mechanism after the pickup roller fails to move the paper. So, if it picks up and gets to the sensor, the only thing I’ve ever seen stop it is a scrap of paper left behind after someone impatiently yanked a jammed paper out. What to try is to take a piece of file folder and shove it down the paper path in the direction paper normally moves. The file folder is usually stiff enough to push out any unseen leftover scraps of paper.
Read Full Q/A … :
Canon Pixma IP4300
USB Port at back of printer broken
ANSWER : You can buy USB replacement ports at an electronic store. You have to be really good at soldering to replace it as it has to be soldered at the top and bottom of the board.
Read Full Q/A … :
Canon Pixma IP4300
Antivirus Technical Issues Fix Via AVG Customer Support
ANSWER : Obviously, English isn’t your first language. Usually that is a big red warning flag of some sort of scam. Anyone clicking on the link you provide will definitely get some nasty malware.
Read Full Q/A … :
Canon Pixma IP4300
Print Quality Issue (Streaks and Ghosting)
ANSWER : Streaks are mostly caused by internal drum wiper blades that clean left over toner off the drum to prepare it for a new image. Ghosting is caused by a leftover image on the drum. The 6 inches that you mention would be the circumference of the part that is causing it. Fusers will never cause either problem.
Read Full Q/A … :
Canon Pixma IP4300