Epson Stylus Photo Stylus Photo
My Epson stylus p50 printer was having a problem on print head. I changed the print head with the one for Epson Stylus T50 which i was expecting to work properly. The problem that came was that “the installed cartridge is not compatible with this printer” what could be the solution to this?

Experienced technical support provide their insights in answering this question :
One uses 807 cartridges, the other uses 811 cartridges. That would be your problem. They’re probably the same cartridge, but use different chips. You can try buying 3rd party chips online. It might work.

How to Identify and Fix Common printer Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Method 1 – Bypassng Ink Cartridge on Epson Printer

After opening the lid, hold the ink button down. When you find the ink holer is moving to its position, then open the cartridge`s lid which is having no ink. Close it again without removing the cartridge. Close the lid and start to print.

A1: When an Epson printer is in an error state, it indicates that there is a problem or issue preventing the printer from functioning properly. It could be due to various reasons such as paper jams, connectivity issues, software conflicts, or low ink levels.
Remove the cartridges from your printer – switch your printer off. Using a piece of damp kitchen roll, gently wipe the copper plate on the cartridge. Allow the chips to air dry. Once the chips are completely dry, re-install the cartridges into your printer and switch the printer back on.
Step 1: Remove the print cartridge from the printer. Step 2: Align the cartridge with the reset tool`s base marks. Step 3: For several seconds, press the reset tool pins firmly on the chip contacts on the cartridge. The cartridge and the device are in hard contact when you see a blinking red light.
a misprint or misspelling in a text.
Epson Printer Errors

If your printer is displaying an error code or message on the control panel, search for `Error code` on your product`s FAQs tab.

Check the ink levels

Sometimes, the printer may not print black ink because it is low or empty. You can check the ink levels on the printer`s display, or by using the software that came with your printer. If the ink level is low, replace the cartridge or refill it according to the manufacturer`s instructions.

The easiest remedy for this is to open the box and stand the cartridge upside down for a few minutes before using. Next, get a damp paper towel, fold it into quarters and the set cartridge print head down onto it, holding it there for three minutes. This will help to prime the print head and pull the ink out.
Verify the ink cartridge(s) is inserted properly. Some cartridges snap in place, and if they are not inserted fully, the printer won`t print anything. If a lever is moved from its original position to allow for installation of ink cartridges, ensure it is returned to its original position.
Missing colours, streaky prints, smudges and ink blotches are all signs that your printer ink or toner cartridge may be damaged. Some printers will actually warn you if a cartridge is damaged and will refuse to print. This includes HP ink cartridges, Samsung toner cartridges and Canon ink cartridges.
1. Paper Jams. Paper jams are a common problem for printers, resulting in time-consuming and frustrating delays. It can occur when loose sheets of paper get stuck in the rollers or feeding mechanism of the printer.
Error Code: 21000012c or 20000107

This error code appears if you have more than one potentially compatible printer connected to your computer when you try to use the reset utility. Solutions: Make sure you only have the target printer (ie: the one you wish to reset) connected to your computer and turned on.

It is usually on the top right-hand side of your printer, near any digital display screen that the printer may have, and where the button used to turn the computer on and off is also located. Find the button marked Pause/Reset on the row of buttons on the control panel.
The most common cause of the Surfer error “Print aborted Code = -1” is insufficient memory on the printer.
A printer`s heads, nozzles, and other components can become dirty or clogged, which could show up as white lines running across your page. Your printer may have a head-cleaning feature available through your device software located on your computer or from the control panel on the printer itself.
Description. The Write-Error cmdlet declares a non-terminating error. By default, errors are sent in the error stream to the host program to be displayed, along with output. To write a non-terminating error, enter an error message string, an ErrorRecord object, or an Exception object.
Common sources of error include instrumental, environmental, procedural, and human. All of these errors can be either random or systematic depending on how they affect the results.
Your Epson printer may have failed to recognize the new ink cartridge, or its ink level system has read it as empty. For numerous Epson printer models, there`s a way to bypass this built-in ink checking system through a quick cartridge reset. Raise the printer`s top cover and then hold the Ink button.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

ink error
ANSWER : One uses 807 cartridges, the other uses 811 cartridges. That would be your problem. They’re probably the same cartridge, but use different chips. You can try buying 3rd party chips online. It might work.

Error Code 51.1 says Printer Error No Kidding.lol
ANSWER : Sometimes turning off and on will allow you to print a few pages. The error is a beam detect error. The only real fix is to replace the laser scanner unit. Could be a loose connector on the scanner or DC controller from the scanner. That’s unlikely. You could try the only other free fix which is to open the scanner assy. and clean all the mirrors inside. The dust could obstruct the laser beam enough to cause the detect error.

Epson 7880 ink pump sucking ink
ANSWER : Not ink pump, but air pump, to put the ink feed under pressure.

ink pad full error
ANSWER : You need a reset utility to do it. This one appears to be free. http://www.wic.support/?page_id=134

MP170 (5b00) Ink Tank Full Error
ANSWER : Thanks, worked a treat!

Reseting the ink levels for hp c7280,
ANSWER : I held the # and 6 down long enough to start a complete re-set of the printer But the Black ink level still shows as depleted when it is actually still half full.

HP CLJ CP 5225 ERROR 55.0601
ANSWER : my printer cp5225 is giving me error code 55.0601 message which i can’t fix please help

Error Code 52.1M
ANSWER : Magenta laser error. The spinning motor bearings cause the squeal and that slows it down causing the error. You could try opening it and lubricating the motor shift with a drop of synthetic lubricant. Do not use more than a drop.