Pretty much nothing else you can do except try another new cartridge. I had 2 identical HP printers once in the shop. One of them didn’t like one of the cartridges. I swapped it over with the other printers cartridge and it was happy. So was the other printer. Swapped the cartridges back and it didn’t like it again. How do you explain that? You don’t.
How to Identify and Fix Common printer Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
The “Incompatible Cartridge” message may signal you that the cartridge was placed in the wrong slot. In case you get such an error, make sure the cartridge model numbers match your printer model and your country/region. After that, check if they are installed correctly in the corresponding slots.
First, remove and reinstall the designated cartridge 2-3 times until it securely sits in the slot to overcome an HP printer cartridge error. Next, turn off the printer and take out all the cartridges. Gently wipe the cartridge and carriage contacts with a dry, lint-free cloth and reinstall again.
Remove the empty cartridge and refill it. Insert an additional full cartridge into the printer. Turn on the printer and wait for it to recognize the cartridge. Remove the additional cartridge before printing an alignment page.
Disable the Cartridge Policy feature
In the Device Management pane, select the printers (or printer group) to configure. In the bottom navigation pane, select Config, and then select Supplies. In the Cartridge Policy section, select Off. Click Apply.
Using a generic or refilled ink cartridge won`t automatically void your warranty, but it`s important to note that any damage caused specifically from using a non-HP ink product won`t be covered by the warranty for your HP printer.
Verify the ink cartridge(s) is inserted properly. Some cartridges snap in place, and if they are not inserted fully, the printer won`t print anything. If a lever is moved from its original position to allow for installation of ink cartridges, ensure it is returned to its original position.
Compatible cartridges are meant to fit into inkjet printers instead of cartridges made specifically for the printer by companies such as Epson, HP, Lexmark, Canon and others.
Compatible ink (or compatible toner) is manufactured by third-party manufacturers and is designed to work in designated printers without infringing on patents of printer manufacturers. Compatible inks and toners may come in a variety of packaging including sealed plastic wraps or taped plastic wraps.
Since all of these different cartridge series look the same, many people wonder if they are interchangeable. Are they interchangeable? The answer is no, even though they look similar and will likely fit inside your printer, they will not print if installed in the wrong printer.
Myth 1: Perhaps the most common misunderstanding is that compatible cartridges will damage your printer. There is no evidence to support this. The truth: Compatible cartridges are designed to fit into your printer and work in exactly the same way as original cartridges, even though they may look a little different.
Press the button on the chip-reset tool for several seconds until the LED light on the device goes off. Then, unlock the reset tool from the cartridge. Use the resetter with other cartridges and install them back into the corresponding slots in your printer. Voila!
Should you have a printer that`s not connected to the internet, you can go to “settings” on the printer menu and simply select the “disable cartridge protection” option available. Alternatively, if your printer has internet connectivity you can open up a browser on a PC or laptop and type in your printer`s IP address.
Yes, you can use an HP printer without HP Instant Ink. HP Instant Ink is our Ink Subscription service that can save you up to 50%1 on ink or toner and will ensure you always have ink when you need it.
You can resolve this problem by resetting your HP printer`s internal memory: Remove the new ink cartridge and reload the old ink cartridge back into the printer. Wait for about 10 minutes before you proceed to the next step. Remove the old ink cartridge and install the new ink cartridge again.
Using a generic or refilled ink cartridge won`t automatically void your warranty, but it`s important to note that any damage caused specifically from using a non-HP ink product won`t be covered by the warranty for your HP printer.
Verify the ink cartridge(s) is inserted properly. Some cartridges snap in place, and if they are not inserted fully, the printer won`t print anything. If a lever is moved from its original position to allow for installation of ink cartridges, ensure it is returned to its original position.